Hope you don’t mind me chiming in. I simply add Scaler to Reaper as an instrument track. Then (assuming I want another instrument to accept input from Scaler) add another instrument. Then in Reaper set a link between the Scaler track and the instrument (in my case AmpleSound). Then turn off the audio on the link leaving the midi.

In Reaper right click on the instrument track record and set Record Output to Record Output(midi). Note I also have Monitor Input set as well as Midi input all MIDI.

Next depending how you want to play. In Scaler under settings Playback set DAW Synch then put the cursor where you want to record and press record (make sure you have the instrument track armed for record). An alternative is to not set DAW Synch and press keys but I find that much harder.. note right click in Scaler on section C play button will also set DAW Synch mode.

Another alternative is to record on the Scaler track and drag where you want it to go.

Hope this makes sense.

Tony

Last edited by Teunis; 04/12/23 04:20 PM.
HP i7-4770 16GB 1TB SSD, Win 10 Home,
Focusrite 2i2 3rd Gen, Launchkey 61, Maton CW80, Telecaster, Ovation Elite TX, Yamaha Pacifica 612
BB 2022(912) RB 2022(2), CakeWalk, Reaper 6, Audacity, Melodyne 5 Editor, Izotope Music Production Suite 4.1