Originally Posted By: Rustyspoon#
"Windows explorer window will appear unexpectedly even if BiaB is not running. The only thing on F: is BiaB."

This likely related to either the faulty drive, which connects / disconnects (unlikely) or to your Power Management settings for USB which puts drive to sleep and then wakes it up, which sparks an idea about your Tascam.

Are your Power Settings set to Maximum Performance?
There is a setting in advanced Power Menu that deals with USB
It is named: USB SELECTIVE SUSPEND SETTING

If it is "enabled" try "disable" option to give full power to USB port, see if it solves at least one of the issues.

P.S. Try a different USB port.

Hey Rusty, BiaB and Drive F: have been exonerated because I disconnected the Drive F: USB cable at the PC USB port and the glitches still happen. So we can't blame F:

You have a good idea about trying a different port. I inserted my printer USB cable into the USB port that has been connected to the interface. And inserted the interface cable into the USB port that has been feeding the printer. I sent a page to the printer and it printed fine. Then I fired up Studio One and played a song. The song played perfect with no glitch which is hopeful but says very little. It may take some time for the glitch to appear because it's an intermittent issue. Thanks for suggesting this . . . we'll see if it's a permenant solution.

https://soundcloud.com/user-646279677
BiaB 2025 Windows
For me there’s no better place in the band than to have one leg in the harmony world and the other in the percussive. Thank you Paul Tutmarc and Leo Fender.