Originally Posted By: MusicVillain
..Musocity, not sure if you are fluent in the English language..

I only speak Australian but I can do a good northern Canadian, American, southern or British English accent.

I have done videos in the past but they are too time consuming.

It should work with Cubase but I went to try and it needs reactivating because of motherboard change but too many hoops to jump so could not be bothered.

Midi sync is not stable like Rewire or a Biab Sync VST.

Zoom++


Originally Posted By: musocity
You can try this:
Load this in a Biab VSTi slot midiOut64.zip (you may need midi on that track for the VSTi to be active ?)
Set it to MTC LoopMidi and set Studio One Midi In to that also.

Go to menu Studio One > Options > Advanced > Synchronization Tab.

Sync to External Devices: Click this box to make Studio One follow incoming MIDI Time Code (MTC). Note that some MIDI devices only transmit MIDI clock data, not MTC. Studio One requires a greater degree of accuracy than a simple MIDI clock can provide. For conversion from SMPTE, an outboard synchronizer is required. For additional accuracy, using an external word clock (master) is recommended.
MIDI Time Code: Select the device that will receive MIDI Time Code (MTC). The gray field to the right of the device name indicates the current status of MTC transmission.
MIDI Machine Control: Select the device that will receive MIDI Machine Control (MMC).