I like the suggestions by VideoTrack for the additions to the Count-in dialog. And I agree, I don't want to make it so complicated that this becomes hard for PG Music to implement. Having said that, I think it needs to offer something like these checkbox options:
__ Count-in will be played __ Specify numbers of measures for count-in (pulldown) __ First bar has emphasis on every second beat only (multiple bars only) __ Count-in uses beat pattern in this number of measures (pulldown) __ Play count-in when spacebar pressed in measure one
Something along these lines, not that I've provided a complete list. Note: the forum software doesn't seem to allow me to indent. The second checkbox would be indented and grayed out if the first is unchecked etc.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus 192 & Faderport 8, Royer 121, Slate VSX, Adam Sub8 & Neumann 120 monitors.
))))) BIG +1 !!!! This seems like such an obvious and relatively easy one to tackle!
Yes, I thought it would be relatively straightforward, but apparently it must have them stumped.
Sigh. Well, we can only wish.
I've been a musician for a very, very long time, but I still can't get used to hearing a 4 beat count-in for a song that starts as a Jazz Waltz. Seems odd to still be doing this in 2016, doesn't it?
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
I just tested this with 2 different Waltzes in BIAB 2016 (build 127) and it appears to be fixed. Proper 3/4 count-in.
Trevor, can you confirm that this is still broken in the Windows version, or has it been fixed?
Hi Zedd Thanks for the request The problem is that if a song has a mixture of 4/4 and 3/4 time signatures and starts in 3/4, a style with a 4/4 time signature must be chosen.
The first bar is set to play 3 beats. But the count in is in 4/4.
The Count-in that is set from Preferences is Global, not local to a song.
Try this on your system. Download the song and play it. It starts with the first 4 bars as a 3/4 and on the second 4 bars it changes to 4/4. Listen to the count-in, then start playing. Whoa!
BiaB checks the style to determine the count-in to use. All BiaB has to do is check how many beats are in the first bar, and use that as the count-in. Easy? Well, that's what I thought. Apparently this must be quite difficult. 3+ years, stacks of support, not one disapproval, and we're still waiting...
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
The problem is that if a song has a mixture of 4/4 and 3/4 time signatures and starts in 3/4, a style with a 4/4 time signature must be chosen.
The first bar is set to play 3 beats. But the count in is in 4/4.
I'm so sorry to have troubled you with this. I wanted to +1 this thread, but thought I ought to try it out first to hear what's going on... but I forgot about testing something that had both 3/4 and 4/4 (which was the whole point).
Indeed it's not working, and could easily throw you off if recording or playing along. I wonder why this hasn't been addressed after all this time? It seems as though it should be such a simple thing to remedy.
+1 for fixing this.
Apologies again for my oversight. I read all the posts in this thread, and then proceeded to test the wrong thing like a nitwit.
I'm so sorry to have troubled you with this. I wanted to +1 this thread, but thought I ought to try it out first to hear what's going on... but I forgot about testing something that had both 3/4 and 4/4 (which was the whole point).
Indeed it's not working, and could easily throw you off if recording or playing along. I wonder why this hasn't been addressed after all this time? It seems as though it should be such a simple thing to remedy.
Hey Zedd, no need to apologize at all.
Your post gave me a chance to create a sample of the issue that PG Music staff can now listen to and hear for themselves how problematic it is <hint>.
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
I'm still leaning to the idea also of making the count-in selectable on a song by song basis, rather than global (it's currently either Off always or On always). Some songs don't need a count-in. Something like this would resolve:
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
That is a very sensible solution Trevor. That ought to be fairly easy to implement, and seems like an essential addition.
Thanks to you for also lending your support Zedd. Yes, this can't be an impossible challenge, and it is only asking for what a real musician would expect in "real-world" conditions.
So, I'm going out on a limb here. Someone has to. Let's imagine you were in a band, and the band leader supplied a 4 beat count-in but expected you all to start playing 3 beats in the bar. No? I guess you can't imagine that. I certainly can't.
What would someone from PG Music play if they were in that band?
I'm going to keep pushing this, because what happens currently is just fundamentally wrong. This is not about improvement. It is about program "problem resolution" (note: I restrained myself from saying the "B" word, even if that's what it is.)
Imagine if Roland or Yamaha did this with their Arranger Keyboards. Imagine if a 3/4 song on their system started with a 4/4 count-in. No? You can't imagine that? Well, neither can I. If Roland or Yamaha did that you'd probably take it straight back to the shop. But that's exactly what BiaB currently delivers. Is that really musically OK? Think about it.
I have only ever tried to provide support, suggestions for improvement, and positive ideas to PG and his staff, and to offer ideas to better the product. My suggestions are supported not by 'just talk' but by demonstrated "real world examples". I can only hope that someone from PGM is listening. This is too important an issue to walk away from.
If you agree with rectification of product issues, then don't be afraid to lend your support, OK?
We all will benefit (PGM too...).
Trevor
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
Fixing obvious problems like this (please note that I also haven't pronounced the forbidden "B" word, in order to avoid offending a couple of pgm fanboys here) should be the first priority for PG Music.
I do it the other way. If the song starts in 3/4, I use a 3/4 style, then I select the measure where 4/4 starts and highlight the range of bars and use the set time signature for a range of measures. Then, I chose 4/4 and I'm good to go. I did this with a song where it had one bar in 2/4 and it worked. It took a little effort to for BIAB to figure out to make that one measure 2/4 but it worked.
Computer: Macbook Pro, 16 inch 2021 DAWs: Pro Tools, Logic, and Maschine plays drums, percussion, bass, steel pan, keyboard, music producer/engineer
I do it the other way. If the song starts in 3/4, I use a 3/4 style, then I select the measure where 4/4 starts and highlight the range of bars and use the set time signature for a range of measures. Then, I chose 4/4 and I'm good to go. I did this with a song where it had one bar in 2/4 and it worked. It took a little effort to for BIAB to figure out to make that one measure 2/4 but it worked.
Re:
Quote:
"then I select the measure where 4/4 starts and highlight the range of bars and use the set time signature for a range of measures. Then, I chose 4/4 and I'm good to go"
So I interpret that you are saying that by choosing 4/4 you make a 3/4 style play 4 beats to the bar?
How do you do that? What steps do you use? In my version of BiaB (2016), if you tell a 3/4 style to play 4 beats it plays 3 beats. You can only lose one, not add one.
OK, reading and analyzing further, I'm presuming that you use 2 bars of 2/4 to make something that 'sounds' like one bar of 4/4. If that's the case, then how does the score look? It won't read correctly like one bar of 4/4.
And in any case, I think you've respectfully missed the complete point of these posts. To recap, change your song that has the 3/4 style to start (the first bar) with 2 beats (or 4 beats), then listen to the count-in. I suspect that you'll get 3 beats.
BiaB always plays the count-in based on the selected style, not the number of beats in the first bar. It's a long-term major design issue. I'm really hopeful that it's being resolved. (3,100+ views to date...)
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
This overdue request needs resurrecting, just in case the 2018 team aren't sure what needs to be included
BIAB & RB2026 Win.(Audiophile), Windows 10 Pro & Windows 11, Cakewalk Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Session Keys Grand S & Electric R, Kontakt, Focusrite 18i20, KetronSD2, NS40M, Pioneer Active Monitors.
Forever Grateful, BUT, sometimes pissed of. Trygve "Leo" Larsen BiaB 2020, Windows 8.1, Intel Core i5 CPU, 270GHz, 32 Gb RAM My OLD tracks on Soundcloud; https://soundcloud.com/trygve-larsen My NEW is unpublished The Universe = Uni-verse ie one song.
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
MIDI SuperTracks Set 46: Piano & Organ
Instrumental Studies Set 24: Groovin' Blues Soloing
Artist Performance Set 19: Songs with Vocals 9
Playable RealTracks Set 5
RealDrums Stems Set 9: Cool Brushes
SynthMaster Sounds Set 1 (with audio demos)
Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
MIDI SuperTracks Set 47: More SynthMaster
Instrumental Studies 25 - Soul Jazz Guitar Soloing
Artist Performance Set 20: Songs with Vocals 10
RealDrums Stems Set 10: Groovin' Sticks
SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Join Tobin as he takes you on a tour of the new user interface in Band-in-a-Box® 2026 for Windows®! This modern GUI redesign offers a sleek new look with updated toolbars, refreshed windows, and a smoother workflow. The brand-new side toolbar puts track selection, the MultiPicker Library, and other essential tools right at your fingertips. Plus, our upgraded Multi-View lets you layer multiple windows without overlap, giving you a highly flexible workspace. Many windows—including Tracks, Piano Roll, and more—have been redesigned for improved usability and a cleaner, more intuitive interface, and more!
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean