let's get back to being helpful Byron. If Strainj1 opens the BIAB OPTIONs menu and chooses Preferences then audio and chooses the WAS driver i think that could cure his problem. easy fix to try.

i found that the WAS driver (which is BIAB dialogue short for WASAPI) was as good for recording and plaback as my ASIO driver when i was recording using my soundblaster sound card. the soundblaster ASIO driver was a bit flakey.

now i use a usb interface so i do use ASIO butr when the interface is not plugged in i use WAS.

so if Strainj1 wants to try a quick fix following my intructions might just solve his problem without worrying about anything more complicated.

if it doesn't he can come back for more advice. however, it also depends on what driver was in use when the recording was made although Strainj1 says the visuals line up - so he might need to try a quick few bars of re-recording using what BIAB calls the WAS driver to see if that cures the problem. copy the file under a new name and rerecord a few bars of the audio track as a test.

Last edited by Bob Calver; 08/29/23 12:13 AM.