The plan for RB 2024 is to have the VU levels for the higher ports show up on the tracks that are receiving input from the higher ports during recording, rather than duplicating what's input to the first input port. That will be an improvement for when multiple input ports are in use.

The plan for RB 2024 is to also have the floating VU Meters window (Window - Show VU Meters) display all of the input and output ports rather than just 1 input and 1 output port.

Still haven't been able to duplicate selecting one input port in the Drivers dialog and not have the input VU meters indicate the levels for that port. If you're only selecting one port for input in the drivers dialog, then it shouldn't matter which port it is as long as it actually receives an input signal.

Last edited by Jeff Yankauer; 11/09/23 01:14 AM.
Jeff Yankauer