Using BIAB2024 (1108) on Win10 laptop

I was trying out partial regenerate for the first time and ran into a problem. When I used it at first on the fiddle track to regenerate six bars, everything worked out fine, However, when I did it on the mandolin track for a different six bars, all but the regenerated bars were wiped off the track.

Here's a Dropbox link to the SGU file for before any regen,
https://www.dropbox.com/scl/fi/t0w9sspuxj3lo7rw3dd7y/RegenTest2.SGU?rlkey=wbewn759h6in0q7875mzjejmh&dl=0
Also are screenshots of the results of the mandolin waveform before and after regen. It also shows the bars to regen.

If you have time, I'd appreciate you trying it on your system to see if you get the same result. I've reported it to Support and they have suggested some things to try.

Thanks for any help and Happy 2024!

Ralph

Attached Files (Click to download or enlarge) (Only available when you are logged in)
Screenshot (2).png (201.18 KB, 139 downloads)
Screenshots
Screenshot (1).png (202.37 KB, 140 downloads)