this might seem way way out there and odd but im wondering if a timeout condition is occurring viz casio and bb ie bb is waiting for data ..doesnt get it and thus stops. only pg will know in their coding if a stop condition can occur re the above. maybe midi lag is the issue with cas but not fp.
total!y blue skying it but if fp works with 2024 is there a possibility that the fp transmssion is faster than the casio ? so a lag condition doesnt occur ?
as a crazy experiment check if you have big buffers in bb settings ...check this...then see if reduceing the buffer size.helps. sometimes the silliest things can cause problems.
by the way...and i dont want to get into a big debate over this ..but if your useing pc on board sound chip...ive seen lots of issues helping folks over the years...would recommend a decent low latency asio audio nterface. maybe try out for a week to ensure it works great see rb forum and tips forum for good interfaces. a decent interface will let you set low buffers so you dont get latency which you mentioned up thread.
ps.do you have the net or background programs active while midi recording ? check in task mgr...ie other programs consuming pc resources ? also if you reply by saying but why does cas work with previous years bb versions and not 2024..? a possible answer is maybe 2024 places added demands on pc resources over previous years. but only pg can answer if 2024 consumes more resources.
just some ideas.
om. 🇨🇦. 🇬🇧
Last edited by justanoldmuso; 01/27/2409:26 AM.
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
if fp works with 2024 is there a possibility that the fp transmssion is faster than the casio ?
ANSWER: Actually I think it would be the opposite because the Roland is 15 years old and the Casio is brand new. The Casio could be too fast or transmitting too much data. Still doesn't quite go along with why Casio works with all earlier versions EXCEPT 2024.
i dont want to get into a big debate over this ..but if your using pc on board sound chip...ive seen lots of issues helping folks over the years...
ANSWER: I have a desktop and laptop. In one system I am using an external audio interface and the other the internal sound card - makes no difference.
Ok given your answers and all the ideas presented in this thread...and bear with me...but heres further thinking...
1..maybe pg can comment if 2024 is consuming more pc resources than preceeding years. if true then possibly other tasks on the pc in total with bb are leading to a resource issue and impacting bb ? check in task mgr eg is net running also ? if so try without the net.
2..now i know what your going to say which is an enigma...ie...BUT...fp works on bb 2024 ! and thats an excellent point....given your point that maybe cas is throwing out more data than fp maybe this in combo with the larger resource useage bb2024 in total is causeing this odd stop situation. ive seen lots of weird things over the years. it would be interesting to investigate how much data per sec is transmitted by cas over midi versus the fp. and get actual figures. in summary it might be just a pc resource issue. ie bb 2024 plus cas consumes more resources than bb2024 plus fp.. but i might be out to lunch on this. out of interest check out size of 2014 bb exe versus 2024 bb exe. ...there might be a clue there. ram useage ?
3..its totally unrelated but interestingly yonks ago i helped someone with a cas...he ended up getting another kbd.
heres a final thing thats bugging me...some people might say 'its gotta be a codeing bug in bb'...but if true why does fp work with 2024 ?
im gonna get a cuppa tea and do more thinking...lol.
best.
om
Last edited by justanoldmuso; 01/27/2411:04 AM.
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
ok something ive found. running 2024 on a basic song here tssk manager in win is reporting around 2 percent to about 5 percent cpu useage for bbw64 and around 460 mb of ram useage. which varies depending on default synth loaded. in the bb drive itself the exe for bbw64 seems to be around 56mb.. and bb 2024 32 bit is 44mb ? do you concur ?
L2L can you please tell me in 2024 64 bit running for fp connected what your above stats are in win task mgr ? now repeat for casio connected. any big differences in ram or cpu viz fp ? repeat above for 2024 32 bb. does cas work in bb 32 ?? now please repeat for your 2014 version bb. task mgr again. firstly fp then casio connected.. how much pc resources are being consumed ? cpu and ram.
addendum. i assume youve been running bb 64 thru all this. could you try with bb32 exe which comes with 2024 and use with casio connected... does the problem disappear ?
humour me..lol...i hate to be beaten the reasons for above are to assess the possibility of the pc running out of resources. what keeps on troubling me is fp works with 2024 which might lead one logically to conclude there isnt a bug in bb2024. btw as others have said andrew is v good people.
om. 🇨🇦. 🇬🇧
Last edited by justanoldmuso; 01/27/2404:47 PM.
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
That was a great suggestion, but unfortunately, it did not solve the problem. I don't have to even be playing a single note repeatedly; it occurs (the MIDI recording stops in the middle of the song) when I am playing anything - not even just fast notes.
The MIDI clock rate I believe is 31.25kbits/second. Extrapolating that out, and presuming a start and stop bit are added to the 8-bit byte, this means that a byte transmits in about 320 microseconds, and with the normal MIDI message taking up three bytes, indicates that a complete message is transmitted in less than 1 millisecond (3 x 320 microseconds).
USB will transfer data at a significantly higher data rate again.
So I believe that your issue is not in any way related to the speed of your playing (unless you are exceeding 1000 note events / second ).
You mentioned that the BiaB Stop Recording message is displayed. That message would not normally come from the transmitted MIDI. It would come from within BiaB, usually from the Stop button being pressed on the transport.
Is this the stop message that you see?
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Delving a little further into MIDI, there are System Real Time messages that include a Start and Stop message which are normally used to control sequencers. Are there any settings on the Casio to instruct it to run as a sequencer or to synchronize an external device?
Could you provide a screen capture of the end of the MIDI data at the point where the unexpected Stop event occurs? (Please make sure that no filters are affecting the displayed data)
Last edited by AudioTrack; 01/28/2402:36 PM.
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
Delving a little further into MIDI, there are System Real Time messages that include a Start and Stop message which are normally used to control sequencers. Are there any settings on the Casio to instruct it to run as a sequencer or to synchronize an external device?
ANSWER: Not that I'm aware, but I am reaching out to Casio about this. There is an internal recorder on the Casio, but it is triggered by pushing an actual physical button that I can assure you is not being pushed.
Could you provide a screen capture of the end of the MIDI data at the point where the unexpected Stop event occurs? (Please make sure that no filters are affecting the displayed data)
Attached is a screenshot of the last MIDI messages before the recording of MIDI stopped and the "Save Recording?" dialogue pop-up box.
Was "MIDI Recording Stops Suddenly And Randomly" ever sorted out after pages n pages of posts ?
No, the issue is still present with BIAB 2024 and I am still working on it with PG Support. We have determined that early versions of BIAB 2014 thru 2019 do not cause this issue. I'm still waiting to test some later versions.
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support
Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.
Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support
Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins
With the release of Band-in-a-Box® 2025 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll also keep this forum post updated so you can easily find all the latest videos in one convenient spot.
From overviews of new features and walkthroughs of the 202 new RealTracks, to highlights of XPro Styles PAK 8, Xtra Styles PAKs 18, the 2025 49-PAK, and in-depth tutorials — you’ll find everything you need to explore what’s new in Band-in-a-Box® 2025.
Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!
Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.
2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.
If you have any questions, feel free to connect with us directly—we’re here to help!
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.