I'm using the Celtic Waltz Solo Acoustic Guitar which is finger-picked. When I place a hold on a chord ... it strums. Not acceptable, just really "interrupts" the flow. Is there a work around for this? Does the 2017 version of BIAB address this?
I'm using the Celtic Waltz Solo Acoustic Guitar which is finger-picked. When I place a hold on a chord ... it strums. Not acceptable, just really "interrupts" the flow. Is there a work around for this? Does the 2017 version of BIAB address this?
Well, if it doesn't hold when you place a Hold, that ain't right. There have been a lot of "fixes" to holds over the past months. Do you have all the RT updates? If you do, then best if you could upload you BIAB file and let one of us try to play it on the current 2017 to see what we hear.
If it's playing a strum rather than single notes you can change the Hold number the track uses by going into the soloist editor http://www.pgmusic.com/forums/ubbthreads.php?ubb=showflat&Number=367012 Have a look in the realtrack picker in the Holds column and find a similar guitar that uses a different hold number, now change the realtrack to use that hold and see how it sounds. Remember the original hold number just in case they bring out a fix.
EDIT: another thing, that Peter mentioned:
Quote:
One other point, if you've customized the holds by editing them using the soloist editor, you should first, before installing the update, backup default.sol and rtextra.bin in the bb folder. Because these updates will overwrite those files.
Thanks all ... My problem was that it gives a downward strum instead of a pluck which would be more appropriate. I will try looking at the holds as suggested . V
Back to this same issue... I have tried all the fingerpicking holds and they are ALL a strum. Any other suggestions? This downward strum sounds wrong with the fingerpicked waltz.
We will add a feature request for this, but there is a workaround in the meantime. In the notation window, select the guitar track, press PT button and select Enable Playable Track. Put a single note at the start of the bar and then Mute the Guitar track at that bar.
What RT is it ? as I can make up a new Hold file with single notes but if other strumming instruments use that same Hold number it will play single notes for them. If it has a unique Hold number for the RT it will be ok or else a whole new Hold number will have to be made and set the RT to use it
The post was from Apr 08 2017 so they could have 2024 by now ?
Yes, but unfortunately, even in the post of earlier today, the O/P has given absolutely no clue as to what version is now being used. Hence, I can only guess. Just guess, just speculate. Nothing more.
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
The O/P will need a version of BiaB that supports Playable RealTracks.
or in other words, BIAB 2017 will not.
Correct. The suggested workaround will require an upgrade.
The suggested workaround can be done in older versions prior to Playable RealTracks. There was a BIAB tutorial back in 2011 that used the default midi synth and a later if I recall, Musocity demonstrated the concept using Sforzando rather than the default and provided better midi sounds.
The concept prior to Playable RealTracks utilizes two tracks, edit the midi data and mute/return to normal between the two tracks to achieve the desired notes.
In the screenshots, I edited the midi to a single held note but a user could also use the appregio notes or edit the bar to any note or combination they want.
Thanks Charlie. You have suggested another method. I was only noting that the suggested workaround of using Playable RealTracks would require an upgrade from the 2017 release.
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
If I can find out what RT number it is I can make some single note Holds/Shots for it, you just have the hold followed by 4 shots. You could also have a very slow strum option for a fingerpicking Hold just like I put in the Guitar, Acoustic, Nylon Multi Ev8 120 UserTrack :
I think it was RT1815 and I tested it using the PRT method to add a single note hold, and it works pretty much perfectly for that RT. So that is a good solution in the absence of any single-note holds, at least for this RT.
Thanks Charlie. You have suggested another method. I was only noting that the suggested workaround of using Playable RealTracks would require an upgrade from the 2017 release.
You're correct. As Matt Finley noted, Playable RealTracks were not an option in 2017 when the OP had the original issue. Now it's March 2024 and the issue is still not resolved and the OP is asking for other suggestions. After her 2024 post, two options were provided here on the forum, Playable RealTracks and a custom hold proposed by Musocity. At the time I made my suggestion, the OP had not responded to either of the prior suggestions. I was providing a third option for the OP if she returned and neither of the earlier two suggestions were suitable.
One thing there's no speculation about is the OP has a version of BIAB with RealTracks. The method I detailed will work with BIAB versions that have RealTracks so the version she has is irrelevant. If she has upgraded, Playable RealTracks have been confirmed they will work. Musocity offered a method that should also work for her. If not, the method I presented will at least provide the opportunity to resolve the issue.
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.