Originally Posted by justanoldmuso
thus im baffled why some might have a problem subbing a styles standard content with new content.
The issue is specifically with styles that use MultiDrums - these styles are VERY uncommon (roughly 3% of ALL styles). It's quite possible you just haven't stumbled across one yet. I'm going to mark this thread as Resolved, as we are aware of the bug and are working to resolve it - it's in our database with the tracking number 3175.

Originally Posted by justanoldmuso
i would be interested to hear from pg why certain stems are low in level...it doesnt seem to be dominant mics but im finding often its room mics...and other stems.
Stems are completely unprocessed - no EQ or compression or anything, to allow BIAB users to apply their own processing - so you're getting exactly what each mic picked up. There are different ways of recording drums, so depending on who did the initial recording the levels can be different.

Originally Posted by dRoNe13
THIS MORNING I LOADED THE SONG AND NOTICED THAT THE MELODY TRACK HAD CHANGED COLOUR TO ORANGE, AND THE MELODY TRACK NAME HAD CHANGED TO: 'ARTIST' AND THE DESCRIPTION HAD CHANGED TO: 'STEREO 32-BIT'
Did you render a WAV file of your song and save it in the same directory with the same file name? If so, change the name of the WAV file to something else. BIAB automatically loads WAV files with the same name onto the Melody track, which turns it orange exactly how you're describing.

Originally Posted by dRoNe13
(IS THERE A WAY TO MANUALLY CHANGE THE SAMPLE RATE INSIDE BIAB, OR IS IT DONE AUTOMATICALLY WHEN I CHANGE IT IN THE ASIO CONTROL PANEL?)
BIAB generally follows whatever the sound card is set to, however with ASIO it will be locked to 44,100hz.

Originally Posted by dRoNe13
THE SONG PLAYED OK BUT EVEN THOUGH ALL THE STEMS WERE SHOWING IN THE MIXER, THE DRUMS HADN'T CHANGED, IT JUST PLAYED THE DRUMS THAT CAME WITH THE STYLE _FLOWING.STY I ORIGINALLY CHOSE.
Did you re-generate the song? Or were the drums frozen? Choosing a different Realdrum does not usually force regeneration.

Originally Posted by dRoNe13
IS THERE A WAY TO SELECT ONLY STYLES THAT ARE COMPATIBLE WITH STEMS?
All styles should be "compatible" with stems - the initial issue with stems was specific to styles with MultiDrums, which is an issue we're working on, and the other issues you've reported in this thread are unrelated to stems.

Originally Posted by justanoldmuso
IF IN DOUBT GET A QUALIFIED ELECTRICIAN TO MEASURE THE CURRENT DRAW IN RELATION TO HOUSE OUTLET.
I use one of those inexpensive "Kill a Watt" things, it'll read out the volts/amps/watts being used by whatever's plugged into it.

Originally Posted by justanoldmuso
now im off for my wifes loverly big english breakfast.
Making me jealous there mate!

Originally Posted by dRoNe13
And the style named: SET4TH.STY
As mentioned elsewhere in the thread, the style _SET4TH uses MultiDrums, and will trigger the glitch you're experiencing. Try using a different style that doesn't use MultiDrums - it will be mentioned in the style memo when a particular style uses MultiDrums.

Last edited by Simon - PG Music; 06/04/24 01:20 PM.
I work here