|
Log in to post
|
Print Thread |
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2015
Posts: 41
Enthusiast
|
OP
Enthusiast
Joined: Apr 2015
Posts: 41 |
Since I have switched my main productivity machine from a Windows to Mac machine, I now have BIAB launched from a Windows VM inside of the Mac (Windows guest, Mac Hypervisor/Host). Windows is installed on my primary hard drive - meaning that this image is running from the internal (aka "fast") SSD drive. Since BIAB is so big - I had to get an external USB drive to fit everything which is USB attached.
... this USB drive is presented to Windows as a network share \\somedevice\somesharename. And it happens to be the "J:" drive under Windows. I know I can set this up differently - but this is what I have. BIAB runs its executable off this shared (USB) drive and the performance of BIAB in general (load time, etc) is good.
The problem I see is when rendering to audio, it takes "forever". I see that temp files always are using the location of BIAB's install as the temp file location. I would prefer to move temp files to a faster drive (C: in this case) either always OR have the temp files use the target file location for the location. So if I tell BIAB to save a file in C:\subdirectory\my_render.mp3 that the temp files would target C:\subdirectory
I think this would speed up rendering quite a bit for my configuration.
Is there a way to alter which windows drive temp files are created?
... BTW: I'm using a now ancient version 2019.
Thanks!
Last edited by JasonWhiteman; 06/01/24 02:23 PM.
1/1/2024 - Win 10 BIAB 2019 64bit Build (644), RealBand 2019 (4)
Prior - Sig can't fit a running list - so just showing current version
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2012
Posts: 20,827
Veteran
|
|
Veteran
Joined: Jun 2012
Posts: 20,827 |
I don't think it's possible. I'm not aware of any setting that allows the user to change this. Others may know more.
BIAB & RB2026 Win.(Audiophile), Windows 10 Professional & Windows 11, Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2009
Posts: 3,110
Veteran
|
|
Veteran
Joined: Jun 2009
Posts: 3,110 |
So you have the Win version running on Mac in a VM and you want to render to mp3 but it's too slow ?
If you had Reaper running on Mac it would just instantly open the frozen Win SGU and could load the tracks in as mp3 or other formats.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 15,944
PG Music Staff
|
|
PG Music Staff
Joined: May 2000
Posts: 15,944 |
> The problem I see is when rendering to audio, it takes "forever". I see that temp files always are using the location of BIAB's install as the temp file location.
Jason,
I assume you’re referring to BiaB, and not Realband,
For BiaB, what temp files are you referring to? Normally, to save a mp3, the only files saved are going to be the master.wav and the master.mp3 and both of those get saved to the (fast c:\…) directory you choose, and not to the BB home directory. The .mp3 conversion gets done by a windows codec, so we don’t have any control over that, but I don’t recall it needing to use temp files to do that. So let me know what temp files you are seeing.
‘The slowness you are seeing is likely related to the slow USB connection to the hard drive you’re describing that contains BiaB as well as the RealTracks. That would affect generation time of the arrangement itself, which takes place in memory, not on disk. But to make the arrangement, it is reading (not writing) lots of files from the RealTracks and RealDrums folders in your (slow) USB drive.’
What is the time to just render to a .WAV file?
Have Fun!
Peter Gannon
PG Music Inc.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2015
Posts: 41
Enthusiast
|
|
OP
Enthusiast
Joined: Apr 2015
Posts: 41 |
Yes, this is BIAB. I'll gather more details and post back. Thanks for the help.
>So you have the Win version running on Mac in a VM and you want to render to mp3 but it's too slow ?
Yes, I understand implication.
>If you had Reaper running on Mac it would just instantly open the frozen Win SGU and could load the tracks in as mp3 or other formats.
I don't have Reaper but see it's fairly popular combined with BIAB. I think I'd need a newer version to get that to work (and the Mac version to run the plugin). Let me know if there's an option using what I have (2019 Win). I do have Cubase (Mac).
1/1/2024 - Win 10 BIAB 2019 64bit Build (644), RealBand 2019 (4)
Prior - Sig can't fit a running list - so just showing current version
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2020
Posts: 2,766
Veteran
|
|
Veteran
Joined: May 2020
Posts: 2,766 |
The 2019 version of BIAB does in fact render the wav file to your BB folder - specifically, J:\bb\Data\temp_wav_render.wav in your case. There is no way to change this, however there is a workaround: Using the Drag and Drop station in the upper left of the window will render directly to your DragDrop folder, which can be set to wherever you like. Give this a shot and see if it helps, and post back here with an update. Please see the manual page here: https://www.pgmusic.com/manuals/bbw2019full/chapter4.htm#_ToolbarsAs well, if you're considering upgrading anyway, newer versions of BIAB render to the target folder as Peter mentioned. As you're now on a Mac, you can crossgrade to the Mac version which will let you avoid having to use a virtual machine - these can also slow things down, particularly read/write speed over your "network" drive (the VM would limit file transfer to the speed of the virtual network interface, which is likely much slower than the hard drive).
I work here
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2015
Posts: 41
Enthusiast
|
|
OP
Enthusiast
Joined: Apr 2015
Posts: 41 |
Thanks! I tried rendering using the drag/drop feature. What I did was clicked on "Master" and held on to it then dragged it to the "MP3" just to the right of the "+" in the drag/drop box. This is the only way I could figure out how to render this way. Before dragging, I setup the feature by making c:\bb\DragDrop my temp directory for this feature. However, I still see the temp .wav file created in the j:\bb directory.
When I right-click on the drag/drop area, I see the second group reads "Open Drag Drop folder [\\network\share\bb\DragDrop]" and the 4th group reads "Copy files to DropBox Folder [C:\bb\DragDrop] ..."
Under the settings the custom folder location for Drag n Drop temp is: "C:\bb\DragDrop\"
The surprise was the Drag Drop folder which is half way correct. It got the path correct "\bb\DragDrop" -- and it wasn't this before I changed the setting. It was just "\bb" for the path. However, the drive is a fileshare "\\network\share" which maps to J: instead of using the C: I set for the drag/drop temp location.
And even so, the temp file (.WAV) shows up in J:\bb (not J:\bb\DragDrop) while doing the drag/drop kind of rendering.
To fill in some information from before (outside of drag/drop) - when I use the standard render audio feature and target C: for the MP3 it takes 13m14s to complete the render. Since the temp file is on J: if I instead target J:\bb for the MP3 using the standard render then this will take 11m35s because it removes the step where the resulting file is copied to C: after assembling on J:
1/1/2024 - Win 10 BIAB 2019 64bit Build (644), RealBand 2019 (4)
Prior - Sig can't fit a running list - so just showing current version
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2015
Posts: 41
Enthusiast
|
|
OP
Enthusiast
Joined: Apr 2015
Posts: 41 |
Quick update: I noticed that J:\bb is creating the file ...
06/04/2024 08:42 PM 10,666,030 DRUMS_TEMP_RENDER.WAV
(filesize is an intermediate size before it's done writing to the temp file)
While C:\bb\DragDrop is now creating the [origfilename]_render.wav temp file.
What I had to do is:
1) Restart BIAB
2) Move the MGU file to the C: drive (it was previously saved in J:)
Now my renders using drag/drop are taking under 3 minutes (around 3.5 minutes if regeneration is necessary) even though the J:\bb\DRUM_TEMP_RENDER.WAV file (which ends up being ~60MB) is being created. This is a big improvement. I'm not sure I understand why the DRUMS_TEMP ... file is stubborn and stays in j: but I'll take a 4x improvement any day. If I could force DRUM_TEMP to C: somehow, I'd probably shave off some more time.
Thanks for the tip -- it got the ball rolling.
I retested the original "normal" audio render (not drag/drop) and with the MGU file on C: this also takes ~3min. So it looks like the big savings here is moving the MGU to the "fast" drive. With the "normal" audio render the same DRUM_TEMP file is showing up in J:\bb as drag/drop.
1/1/2024 - Win 10 BIAB 2019 64bit Build (644), RealBand 2019 (4)
Prior - Sig can't fit a running list - so just showing current version
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2020
Posts: 2,766
Veteran
|
|
Veteran
Joined: May 2020
Posts: 2,766 |
Thanks for the tip -- it got the ball rolling. Happy to help! If I could force DRUM_TEMP to C: somehow, I'd probably shave off some more time. I'm fairly certain that the only way to do this would be to install BB onto the C drive - doing that might also provide further speed improvements as the application and data files would be on a faster "drive", not just the DRUM_TEMP file.
Last edited by Simon - PG Music; 06/05/24 01:10 PM.
I work here
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2015
Posts: 41
Enthusiast
|
|
OP
Enthusiast
Joined: Apr 2015
Posts: 41 |
Wanted to chime in now that the gig is completed. Thanks again to all. The suggestions helped make sure that BIAB didn't "get in the way" of success per schedule and allowed me to craft a good show for an hour of dinner music playing straight except for breaks while the generated solos got their own turns.
I'm looking forward to getting more and more into the feature-set. Until next time!
1/1/2024 - Win 10 BIAB 2019 64bit Build (644), RealBand 2019 (4)
Prior - Sig can't fit a running list - so just showing current version
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jul 2000
Posts: 27,355
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,355 |
Two quick thoughts even if you are resolved:
First, are you still running BIAB 2019? Version 2024 dramatically improved the time required for file regeneration, something you mentioned.
Second, is your external USB drive a SSD? That would also help.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus 192 & Faderport 8, Royer 121, Slate VSX, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2020
Posts: 2,766
Veteran
|
|
Veteran
Joined: May 2020
Posts: 2,766 |
Wanted to chime in now that the gig is completed. Thanks again to all. The suggestions helped make sure that BIAB didn't "get in the way" of success per schedule and allowed me to craft a good show for an hour of dinner music playing straight except for breaks while the generated solos got their own turns.
I'm looking forward to getting more and more into the feature-set. Until next time! Happy to help! Two quick thoughts even if you are resolved:
First, are you still running BIAB 2019? Version 2024 dramatically improved the time required for file regeneration, something you mentioned.
Second, is your external USB drive a SSD? That would also help. Both are great suggestions. 2024 is in fact a huge improvement in speed. Plus even an inexpensive SSD can be at least 10 times as fast as your average external hard drive. In this situation I don't think it would help much, as the "network adapter" in the virtual machine is probably the main bottleneck. If possible, see if the VM software lets you change link speed - 1 gigabit should be what I'd consider "ok", but something like 2.5gbps or 10gbps might speed things up.
I work here
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2015
Posts: 41
Enthusiast
|
|
OP
Enthusiast
Joined: Apr 2015
Posts: 41 |
The external drive is indeed an SSD. It's a Samsung T7 Shield which claims to have very high performance as USB/Thunderbolt interface. I think it's about as good as I can get given my laptop is the same vintage as BIAB (2019 - Intel Mac).
I already have it on my list to upgrade because I like better push/placement granularity for chords in the later versions and I think other items like more stems and "every track acts the same" (just loose features I seem to remember from looking at this a while ago) were things I thought I'd get some milage out of. Still, 2019 is fairly new to me since my first BIAB version was DOS based.
Planning on pseudo-renewing at the end of the year so I get one more newer version. Half way there ...
I too think the bottleneck is how I have the "J:\" drive shared. I think I'm kind of shooting myself a bit in the foot here, so to speak. There are more virtually more direct ways to connect even this external drive. I've got other things happening in this VM that prevented me from making any changes to the VM. I will eventually experiment with modifying the configuration eventually when the other constraints go away. Certainly when I upgrade I'll need to consider to get the Mac version to avoid the virtualization layer. I did think at some point that the Mac version was trailing the Windows version in terms of feature-set.
1/1/2024 - Win 10 BIAB 2019 64bit Build (644), RealBand 2019 (4)
Prior - Sig can't fit a running list - so just showing current version
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Aug 2011
Posts: 10,927
Veteran
|
|
Veteran
Joined: Aug 2011
Posts: 10,927 |
JasonWhiteman,
Your assumption regarding the Mac version trailing the Windows version is correct.
There are some features in the Windows version that have never been available in the Mac version. Having said that, with every new release the Mac version gains features the Windows version has had for years.
Each Mac release lags the corresponding Windows release by about six months. Notice the current Windows release is 2024 while the current Mac release is 2023. If I was a Mac user I would consider the lagging Mac release to be a good thing. Each Windows release receives a bunch of updates after each new release. Mac users do not receive as many updates because the Mac version includes many fixes from the Windows updates.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2020
Posts: 2,766
Veteran
|
|
Veteran
Joined: May 2020
Posts: 2,766 |
Your assumption regarding the Mac version trailing the Windows version is correct.
There are some features in the Windows version that have never been available in the Mac version. Having said that, with every new release the Mac version gains features the Windows version has had for years. This is correct, but in general the missing features are either ones that are not possible or not necessary on Mac or are very old and not often used features. For the most part, anyone who is happy with the Windows version will also be happy with the Mac version (or happier, given the increased stability of macOS and no issues with WAS/MME/ASIO drivers). Each Mac release lags the corresponding Windows release by about six months. Notice the current Windows release is 2024 while the current Mac release is 2023. If I was a Mac user I would consider the lagging Mac release to be a good thing. Each Windows release receives a bunch of updates after each new release. Mac users do not receive as many updates because the Mac version includes many fixes from the Windows updates. Also correct.
I work here
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Watch the video.
You can see all the 2026 videos on our forum!
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Watch the video.
You can see all the 2026 videos on our forum!
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
- MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
- MIDI SuperTracks Set 46: Piano & Organ
- Instrumental Studies Set 24: Groovin' Blues Soloing
- Artist Performance Set 19: Songs with Vocals 9
- Playable RealTracks Set 5
- RealDrums Stems Set 9: Cool Brushes
- SynthMaster Sounds Set 1 (with audio demos)
- Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
- MIDI SuperTracks Set 47: More SynthMaster
- Instrumental Studies 25 - Soul Jazz Guitar Soloing
- Artist Performance Set 20: Songs with Vocals 10
- RealDrums Stems Set 10: Groovin' Sticks
- SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Learn more about the Bonus PAKs for Band-in-a-Box® 2026 for Windows®!
Video: New User Interface (GUI)
Join Tobin as he takes you on a tour of the new user interface in Band-in-a-Box® 2026 for Windows®! This modern GUI redesign offers a sleek new look with updated toolbars, refreshed windows, and a smoother workflow. The brand-new side toolbar puts track selection, the MultiPicker Library, and other essential tools right at your fingertips. Plus, our upgraded Multi-View lets you layer multiple windows without overlap, giving you a highly flexible workspace. Many windows—including Tracks, Piano Roll, and more—have been redesigned for improved usability and a cleaner, more intuitive interface, and more!
Watch the video.
You can see all the 2026 videos on our forum!
Introducing XPro Styles PAK 10 – Now Available for Windows Band-in-a-Box 2025 and Higher!
We've just released XPro Styles PAK 10 for Windows & Mac Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 28 RealTracks and RealDrums!
Few things are certain in life: death, taxes, and a brand spankin’ new XPro Styles PAK! In this, the 10th edition of our XPro Styles PAK series, we’ve got 100 styles coming your way! We have the classic 25 styles each from the rock & pop, jazz, and country genres, and rounding out this volume's wildcard slot is 25 styles in the Praise & Worship genre! A wide spanning genre, you can find everything from rock, folk, country, and more underneath its umbrella. The included 28 RealTracks and RealDrums can be used with any Band-in-a-Box® 2026 (and higher) package.
Here’s just a small sampling of what you can look forward to in XPro Styles PAK 10: Soft indie folk worship songs, bumpin’ country boogies, gospel praise breaks, hard rockin’ pop, funky disco grooves, smooth Latin jazz pop, bossa nova fusion, western swing, alternative hip-hop, cool country funk, and much more!
Special offers until December 31st, 2025!
All the XPro Styles PAKs 1 - 10 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!
Learn more and listen to demos of XPro Styles PAKs.
Video: XPro Styles PAK 10 Overview & Styles Demos: Watch now!
XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
Introducing Xtra Styles PAK 21 – Now Available for Windows Band-in-a-Box 2025 and Higher!
Xtra Styles PAK 21 for Windows & Mac Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!
We're excited to bring you our latest Xtra Styles PAK installment—the all new Xtra Styles PAK 21 for Band-in-a-Box version 2025 (and higher)!
Rejoice, one and all, for Xtra Styles PAK 21 for Band-in-a-Box® is here! We’re serving up 200 brand spankin’ new styles to delight your musical taste buds! The first three courses are the classics you’ve come to know and love, including offerings from the rock & pop, jazz, and country genres, but, not to be outdone, this year’s fourth course is bro country! A wide ranging genre, you can find everything from hip-hop, uptempo outlaw country, hard hitting rock, funk, and even electronica, all with that familiar bro country flair. The dinner bell has been rung, pickup up Xtra Styles PAK 21 today!
In this PAK you’ll discover: Energetic folk rock, raucous train beats, fast country boogies, acid jazz grooves, laid-back funky jams, a bevy of breezy jazz waltzes, calm electro funk, indie synth pop, industrial synth metal, and more bro country than could possibly fit in the back of a pickup truck!
Special offers until December 31st, 2025!
All the Xtra Styles PAKs 1 - 21 are on special for only $29 each (reg $49), or get all 21 PAKs for $199 (reg $399)! Order now!
Learn more and listen to demos of the Xtra Styles PAK 21.
Video: Xtra Styles PAK 21 Overview & Styles Demos: Watch now!
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 21 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
Introducing XPro Styles PAK 10 – Now Available for Mac Band-in-a-Box 2025 and Higher!
We've just released XPro Styles PAK 10 for Mac & Windows Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 28 RealTracks and RealDrums!
Few things are certain in life: death, taxes, and a brand spankin’ new XPro Styles PAK! In this, the 10th edition of our XPro Styles PAK series, we’ve got 100 styles coming your way! We have the classic 25 styles each from the rock & pop, jazz, and country genres, and rounding out this volume's wildcard slot is 25 styles in the Praise & Worship genre! A wide spanning genre, you can find everything from rock, folk, country, and more underneath its umbrella. The included 28 RealTracks and RealDrums can be used with any Band-in-a-Box® 2026 (and higher) package.
Here’s just a small sampling of what you can look forward to in XPro Styles PAK 10: Soft indie folk worship songs, bumpin’ country boogies, gospel praise breaks, hard rockin’ pop, funky disco grooves, smooth Latin jazz pop, bossa nova fusion, western swing, alternative hip-hop, cool country funk, and much more!
Special offers until December 31st, 2025!
All the XPro Styles PAKs 1 - 10 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!
Learn more and listen to demos of XPro Styles PAKs.
Video: XPro Styles PAK 10 Overview & Styles Demos: Watch now!
XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics85,372
Posts791,386
Members39,864
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
|
|
|
There are no members with birthdays on this day. |
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean