if your manual is the same as mine (a few year's older model) near the end of the manual there should be a few pages that show all the CCs and tells what they do.

it's on Pages 26, 27 and 28 in mine.

You can turn all sorts of things on and off...

I think to turn pitch correction off or on send CC 113
(any value from 0-63 will turn it off, any value from 64-127 will turn it on)

likewise for harmony, send CC 110
(any value from 0-63 will turn it off, any value from 64-127 will turn it on)

to turn effects off/on send CC 112

etc

You can change the root note also with CCs so that your sequence sets everything the way you want it for each song

(assuming Scalic mode)
to set root note for pitch correction send CC 47
to set root note for harmony send CC 30
in both cases the value you send with it will be 0-11,
0=C, 1=C#, 2=D, 3=D#, 4=E, 5=F ETC

You shouldn't need to set any of that in chordal mode because you're sending chords to the unit so the root note changes with every chord.

Last edited by Pat Marr; 08/22/10 11:03 AM.
https://www.dropbox.com/sh/ey71h8ep047758h/AAC12jNM0Hz9Q8zsh5iDeqNHa?dl=0