there are a couple of things troubling me....
1..in rb driver info it says steinberg ! huh ?
whats up with that when he is useing a harbinger 2x2 ??

I was not able to get the buffer error to go away without selecting a different driver than general. Steinberg is what worked, it is associated with the Dorico Pro 5 program that I have. Then there's the other info regarding the discontinued Win 11 support for the GS driver.

2..input ports say realtek !
this would imply use of on board sound right ?
i would expect it to say harbinger in input ports.
for example my audient interface here is stated for input and output ports....and same for driver info ! all copacetic.

I saw that and am no less at odds. I mentioned that although I can not see all of the certifying info in that window, when I go into windows setup and turn off the mixer by hand, both of those drivers disappear indicating to me that both input and output drivers represent the mixer. I entered the mixer name to the driver ID in windows setup, but at different times so you may see a name change in the same location in different screen shots of the same window.

Maticulus.

just a couple of points....need clarifying...

1..normally with a usb mixer... recordists plug a microphone into a mic input of the mixer. i'm assuming your doing this and not useing a mic plugged directly into the pc itself ?? please clarify.
I'm plugged into the mixer, note the picture I posted above, audio in and out are all through the mixer.

2..see my points above to rharv.
in summary...if i were useing a usb mixer all i/o would use the mixer
not on board sound.
That is my intent, however, I am not seeing prompts that allow me to definitively make the changes I've been trying to make, for example, the preferences screenshot posted above for RB, #6MIDI, there is no input driver for that screen and the output driver reads GS Wavetable. That doesn't make sense to me when Audio under the same subtopic reads what it reads. I don't see where I can go in and manually change it, or a prompt that lets me search for a driver not shown but present on the machine.

3..i need you to do something...
please post back a pic of rb tracks view.
youll notice that on the left of the tracks view are all the track names...
AND IMPORTANTLY the audio device being used.
for example here i use a audient usb audio interface...THUS...
in the track names audient is indicated as being used on each track.
SO...i would expect your harbinger to be listed on each track as the device being used.
4..if you contact pg support be sure to provide links to your uploaded pics in this thread.

Harbinger is listed and I'm waiting to hear from PGM, I contacted them Fri. morning and emailed them about the issue and included a link to this thread.

just trying to be thorough.
thanks.

om
I am grateful to all who have assisted.

Attached Files (Click to download or enlarge) (Only available when you are logged in)
Mixer track shot.jpg (55.86 KB, 62 downloads)
Last edited by maticulus; 01/04/25 02:20 PM.