< I just need the standard groove here. Is there a way to get BIAB to change this? >

I'm assuming you're using RealDrums. If that's the case, yes BIAB can replace a drum fill to the standard groove.

Here are the steps:

Open the Audio Edit Window and select the Drums Track.

Highlight the area to change the drum fill to the standard groove. (In the Screenshot example, the fill is the highlighted Bar 4 - 5 region)

Hit the Delete key to silence the highlighted section without removing the space. (Shift/Delete removes the data and the space) don't use Shift/Delete.

You'll get an error message that no RealTracks are detected and do you want to select one. Choose yes.

Select any RealTrack and enter. The Drums data will be replaced with Silence, leaving just the space line.

Copy a Bar of the standard groove from another section of the track
Paste this drum standard groove data to the blank fill area
Right click on the Drums Track
Select Track Actions
Select Revert Track to Style instrument to return the track back to Drums.
Freeze the Drums Track to preserve your edit.

Attached Files (Click to download or enlarge) (Only available when you are logged in)
Drum Fill .jpg (207.18 KB, 98 downloads)
Deleted Fill Region.jpg (231.4 KB, 98 downloads)
Drum Fill Replacement.jpg (206.72 KB, 98 downloads)
Last edited by Charlie Fogle; 09/25/25 11:53 AM. Reason: Note: The second image isn't from my test edit. Images 1 and 3 are the actual fill edited out and replaced with the standard groove. Image 2 displays the blank data deletion.
BIAB 2025:RB 2025, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.