|
Log in to post
|
Print Thread |
|
|
|
|
|
Off-Topic
|
Joined: Jun 2006
Posts: 90
Enthusiast
|
OP
Enthusiast
Joined: Jun 2006
Posts: 90 |
Hi all,
I have an acer laptop 4 years old running xp. It has developed a hardware fault so that end of post I get 2 beeps and a message about a resource conflict.
Luckily I am told to press F1 to continue or F2 to enter bios. When I press F1 windows continues to load normally and then discovers new hardware the ethernet port which I try to install the drivers for.
Drivers fail to install no matter what I have tried to do, so I have disabled the ethernet port which stops windows xp from trying to install after each restart.
Returning the laptop to its factory condition makes no difference, it is definitely a hardware fault om the ethernet port in laptop which I can live with, wireless internet works fine
The annoying thing is the beeps at startup, can't see anything in a rather limited bios to disable the port, have tried to disable netowrk but no difference.
At least the laptop is working fine otherwise just the annoying beeps at startup and have to press F1 to load windows.
I know its definitely a hardware fault so would appreciate any ideas on how to fix it rather than having to get a new motherboard.
many thanks
martin
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2008
Posts: 1,061
Expert
|
|
Expert
Joined: Jan 2008
Posts: 1,061 |
There might be a support forum for your brand of laptop but unless there's a bios setting to disable, there might not be a (cheap)good answer.
Wyndham
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Aug 2006
Posts: 8,792
Veteran
|
|
Veteran
Joined: Aug 2006
Posts: 8,792 |
I complete windows install does not solve the issue?
HP Win 11 12 gig ram, Mac mini Sonoma with 16 gig of ram, BiaB/RB 2026, Reaper 7, Harrison Mixbus 11 , Presonus Audiobox USB96
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Well AMI BIOS is the only BIOS that has a 2 beep code. If it indeed is an AMI BIOS the beep code indicates that there is an issue with the first block of memory.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2002
Posts: 12,950
Veteran
|
|
Veteran
Joined: Dec 2002
Posts: 12,950 |
Make a backup of your hard drive! 
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2007
Posts: 1,439
Expert
|
|
Expert
Joined: Dec 2007
Posts: 1,439 |
Without actually being able to see the BIOS screen(s) is is difficult to say. Most systems allow you to disable on board resources like Ethernet ports, sound cards, even the video... But the access will be vendor specific, and often even model specific. I wish I could give you a definitive answer but I can't. My best suggestion is to FULLY explore every BIOS screen and to concur with the earlier suggestion to check out some Acer support forums.
--=-- My credo: If it's worth doing, it's worth overdoing - just ask my missus, she'll tell ya  --=--You're only paranoid if you're wrong!
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jun 2006
Posts: 90
Enthusiast
|
|
OP
Enthusiast
Joined: Jun 2006
Posts: 90 |
Thanks very much for all replies, I will try one of the acer forums and maybe even give a quick call to acer support.
I should have had it looked at last year when it was within the 3 year guarantee, but daughter was the main user and could live with the annoyance of the beep at startup.
Got her a new acer laptop so I have the old one. If it takes too much to fix will just live with it too, just a bit of annoyance at each startup.
thanks again
Martin
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Oct 2008
Posts: 20,586
Veteran
|
|
Veteran
Joined: Oct 2008
Posts: 20,586 |
Martin,
It might be worth searching the internet and seeing if this behavior is a symptom of the CMOS battery and that it is starting to become flat.
Regards,
Noel
MY SONGS...Audiophile BIAB 2026
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Mar 2007
Posts: 827
Expert
|
|
Expert
Joined: Mar 2007
Posts: 827 |
Try taking the first RAM bank out and replacing it with the second one. Periphery unit faults normally show up when windows loads, sounds more like power or memory problem. I've had similar problems, once it was a RAM bank, once the battery unit connections.
Chris
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Quote:
Try taking the first RAM bank out and replacing it with the second one. Periphery unit faults normally show up when windows loads, sounds more like power or memory problem. I've had similar problems, once it was a RAM bank, once the battery unit connections.
That's what I said above. The beep code supports this theory.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jun 2006
Posts: 90
Enthusiast
|
|
OP
Enthusiast
Joined: Jun 2006
Posts: 90 |
Hi again everybody,
Thanks very much for the further input on this. Once windows xp loads on laptop after I press F1 then the system runs fine.
If its a memory problem as Sinbad or Silverstones think it could well be, would running the Memtest application show up any errors on the memory block, without having to remove the memory from the laptop?
thanks very much again,
Martin
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2003
Posts: 24,704
Veteran
|
|
Veteran
Joined: Dec 2003
Posts: 24,704 |
Yes, IF you let it run for a long period of time, like overnight.
OK, a random thought;
Why does toilet paper need a commercial? Who's not buying it?
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2002
Posts: 10,199
Veteran
|
|
Veteran
Joined: Jan 2002
Posts: 10,199 |
Martin,
I would also physically look at the ethernet port. There's a possibility that two of the conducting wires got crunched together somehow. That might also give you a fault indications, and it's easy to check.
Gary
I'm blessed watching God do what He does best. I've had a few rough years, and I'm still not back to where I want to be, but I'm on the way and things are looking far better now than what they were!
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jun 2006
Posts: 90
Enthusiast
|
|
OP
Enthusiast
Joined: Jun 2006
Posts: 90 |
Thanks Gary,
Do you mean to look within the port viewable from the outside of the laptop or screw off the bottom of laptop and look inside?
Thanks
Martin
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2007
Posts: 1,439
Expert
|
|
Expert
Joined: Dec 2007
Posts: 1,439 |
Hi Martin,
Gary means to simply look into the port from the outside. There are 8 "wires" - actually Beryllium-Copper "springs" that are held under tension and which slip into the little notches in the RJ45 plug on the end of your patch lead when you plug it in. If some of these wires have been pushed out of position and are touching each other there is a possibility that the POST is detecting the fault.
BTW, while anything is possible, I'd be very surprised if you find a memopry fault based on the lack of report of strange things/unreliability once the machine is up and running.
--=-- My credo: If it's worth doing, it's worth overdoing - just ask my missus, she'll tell ya --=--You're only paranoid if you're wrong!
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jun 2006
Posts: 90
Enthusiast
|
|
OP
Enthusiast
Joined: Jun 2006
Posts: 90 |
Just checked the wires on the ethernet and they seem fine,will do a memtest on the memory and see what happens.
Probably will live with it then as its just a bit of an annoyance 2 beeps +having to press f1 at startup. Otherwise the computer runs fine in xp. I do have vista installed as well but its really slow.
Martin
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
|
Anonymous
Unregistered
|
|
Anonymous
Unregistered
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2007
Posts: 1,616
Expert
|
|
Expert
Joined: May 2007
Posts: 1,616 |
I assume you checked Acer for a BIOS update? Sometimes that can fix the problem. You may consider re-installing the BIOS even if it is the same version. Also, check in the Device Manager properties for the actual device causing the conflict. Perhaps you can change a resource setting IRQ, etc there.
For what it's worth, I had a machine that gave me two beeps because of a defective hard drive.
R
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2005
Posts: 222
Apprentice
|
|
Apprentice
Joined: May 2005
Posts: 222 |
In case your PC is an Acer 5*** Series laptop, perhaps this thread from another forum will shed some light on the problem. http://www.daniweb.com/forums/thread96933.html I found it and other references by Googling "Acer laptop + 2 beeps and a message about a resource conflict". Hope this is helpful.
JBlatz
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
XPro & Xtra Styles PAK Sets On Sale Now - Until May 15, 2026!
All of our XPro Styles PAKs and Xtra Styles PAKs are on sale until May 15th, 2026!
It's the perfect time to expand your Band-in-a-Box® style library with XPro and Xtra Styles PAKs. These additional styles for Band-in-a-Box® offer a wide range of genres designed to fit seamlessly into your projects. Each style is professionally arranged and mixed, helping enhance your songs while saving you time.
What are XPro Styles and Xtra Styles PAKs?
XPro Styles PAKs are styles that work with any version (Pro, MegaPAK, UltraPAK, UltraPAK+, or Audiophile Edition) of Band-in-a-Box® 2025 (or higher). XPro Styles PAKS 1-10 includes 1,000 styles!
Xtra Styles PAKs are styles that work with the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box® 2025 (or higher). Xtra Styles PAKs 1-21 includes 3,700 styles (and 35 MIDI styles)!
The XPro & Xtra Styles PAKs are not included in any Band-in-a-Box® package.
The XPro Styles PAKs 1-10 are available for only $29 ea (reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Listen to demos and order now! For Mac or for Windows.
The Xtra Styles PAKs 1-21 are available for only $29 ea (reg. $49 ea), or get them all in the Xtra Styles PAK Bundle for only $199 (reg. $349)! Listen to demos and order now! For Mac or for Windows.
Note: XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 19 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version as they require the RealTracks included in the UltraPAK, UltraPAK+, or Audiophile Edition.
Supercharge your Band-in-a-Box today with XPro Styles PAKs and Xtra Styles PAK Sets!
Band-in-a-Box 2026 for Mac Videos
With the release of Band-in-a-Box® 2026 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll keep this forum post updated so you can easily find all the latest videos in one convenient spot.
Whether you're exploring new features, checking out the latest RealTracks or Style PAKs, this is your go-to guide for Band-in-a-Box® 2026.
Check out this forum post for "One Stop Shopping" of our Band-in-a-Box® 2026 Mac Videos!
Band-in-a-Box 2026 for Mac is Here!
Band-in-a-Box® 2026 for Mac is here and it is packed with major new features! There’s a new modern look, a GUI redesign to all areas of the program including toolbars, windows, workflow and more. There’s a Multi-view layout for organizing multiple windows. A standout addition is the powerful AI-Notes feature, which uses AI neural-net technology to transcribe polyphonic audio into MIDI—entire mixes or individual instruments—making it easy to study, view, and play parts from any song. And that’s just the beginning—there are over 100 new features in this exciting release.
Along with version 2026, we've released an incredible lineup of new content! There's 202 new RealTracks, brand-new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two new RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Special Offers
Upgrade to Band-in-a-Box® 2026 for Mac and save up to 50% on most upgrade packages during our special offer—available until May 15, 2026. Visit our Band-in-a-Box® packages page to explore all available upgrade options.
2026 Free Bonus PAK & 49-PAK Add-ons
Our Free Bonus PAK and 49-PAK are loaded with amazing add-ons! The Free Bonus PAK is included with most Band-in-a-Box® 2026 for Mac packages, but you can unlock even more—including 20 unreleased RealTracks—by upgrading to the 2026 49-PAK for just $49.
Holiday Weekend Hours
As we hop into the Easter weekend, here are our holiday hours:
April 3 (Good Friday): 8:00 AM – 4:00 PM PDT
April 4 (Saturday): Closed
April 5 (Easter Sunday): Closed
April 6 (Easter Monday): Open regular hours
Wishing you an egg-cellent weekend!
— Team PG
Update to Build 10 of RealBand® 2026 for Windows®!
If you're already using RealBand 2026 for Windows, download build 10 to get all the latest additions and enhancements.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
Band-in-a-Box® 2026 for Windows® users: Build 1237 is now available!
Already a Band-in-a-Box 2026 for Windows user? Stay up to date and download the build 1237 to get all the latest additions and enhancements.
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics86,211
Posts801,972
Members40,070
| |
Most Online64,515
Apr 8th, 2026
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean