The issue: The sound volume of some instruments fluctuates too much between different song parts.
Example: when going from verse 1 to chorus 1, I mute the guitar 1 track but keep guitar 2 going. However, the volume of guitar 2 comes in significantly lower than the overall volume of the song.
The need: I want to be able to adjust the volume of guitar 2 IN THAT SECTION OF THE SONG (chorus 1) to be even with the overall volume of the song. So far I have only been able to adjust the volume of guitar 2 in the "Mixer Instrument Tracks" BUT, doing so adjust the volume for the entire song NOT just chorus 1. How do I adjust the volume of guitar 2 just for that specific part of the song (chorus 1)?
I used the guitar 1 & guitar 2 example but the same need applies to other instruments and parts of the song when they are muted and brought back to life.
Last edited by jcgato98; 01/01/2604:33 PM. Reason: UPDATED
Press F5 at the measure where you want the change to occur. You will see pull down choices for each legacy instrument. You can do Louder, Fade and some accept negative numbers. There is also Return to Normal that can be used later in the song. There’s more, but try this if you did not know about it.
Sometimes I adjust the Edit, Song Form so I convert to One Long Chorus to make separate adjustments as the song proceeds.
If you are using F5, then please give a specific example where you cannot get what you want.
BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
Just pointing out that, in the example given, the two guitars may be (likely) panned. Besides volume, making the one remaining guitar in that section more centered (for only that section) can help with the perceived volume.
/That may be beyond the scope of the asked question I suppose
Last edited by rharv; 01/01/2608:10 AM.
I do not work here, but the benefits are still awesome Make your sound your own!
If I understand the problem correctly, this should enable you to adjust the volume of a specific region of a specific track:
1. Select the track 2. Go to Audio Edit 3. Select Edit from Audio Edit command bar 4. Select Amplify from the popup window. + and - dB values are recognized.
This is only a theory, as I make these adjustments in my DAW after exporting.
DC Ron BiaB Audiophile Presonus Studio One ASUS I9-12900K DAW, 32 GB RAM Presonus Faderport 16 Too many guitars (is that a thing?)
having been brought up on mixing desks i find the mixer in RB easier to handle - just like an old fashioned desks and you can record mixer moves of the sliders to adjust volume throughout the song. Lots of good advice above for BIAB but the RB mixer is my favourite. and like a real mixing desk you can hear the change as you move the slider.
After some searching thru the video tutorials I ran in to a good Tutorial on how to do exactly what I was looking for. If you have the same need or are just interested in furthering your understanding of audio volume automation I recommend you take a look at it.
I have a different approach. I don't worry about the volume of anything in BB. I know I plan to move everything out of BB and into my DAW. In the DAW I have absolute control over everything from the volume, to the panning and the inclusion of any and all FX for each track.
I've been working this way since forever. I find it easier for me to do everything in the DAW and just let BB make the tracks, which it does exceedingly well.
You can find my music at: www.herbhartley.com Add nothing that adds nothing to the music. You can make excuses or you can make progress but not both.
The magic you are looking for is in the work you are avoiding.
I fully understand that and would likely take the same approach 20-30 years ago. However I picked my very first instrument and started on the music journey @ 65 after retirement. I am now one step away from 70 and found out that manipulating audio editing software is not an immediate thing. The more software one uses, the less instrument playing time one will have available. That being said I have noticed a significant improvement on the BB packages that I have been using the last 5 years. A lot of it has made it easier to manipulate sound dynamics to include as you mentioned above the panning, tone, FX, etc. Always learning, I ran into this video tutorial that covers exactly that...
I fully understand that and would likely take the same approach 20-30 years ago. However I picked my very first instrument and started on the music journey @ 65 after retirement. I am now one step away from 70 and found out that manipulating audio editing software is not an immediate thing. The more software one uses, the less instrument playing time one will have available. ........
I'm headed to 72 this year. My how time flies. I create the song in BB. Then I open the DAW and insert the BB plugin. I can drag the tracks I want and use BB plugin to add more instrument real tracks. All of that is quick and easy. I still have plenty of time for playing the keyboard, guitar, and bass parts if I'm inclined to play them myself. I don't see that it takes any more time this way. In fact I believe it is quicker. When I need to control the volume of something, in the DAW I simply add a volume envelope and manually drop my nodes. If it's too loud or too soft I can change it with a quick click drag. If I don't like a particular track, I mute it and keep on going.
Yeah there's a little bit of a learning curve but once you get the hang of it, it becomes a much faster way to work.
And adding FX..... There's no comparison to how easy it is in the DAW. Stacking multiple FX and rearranging the order is a click drag process. 2 seconds and done
You can find my music at: www.herbhartley.com Add nothing that adds nothing to the music. You can make excuses or you can make progress but not both.
The magic you are looking for is in the work you are avoiding.
It all sounds good. Maybe once I actually learn to play the instrument and become pretty familiar with BB I'll add the DAW route to the repertoire. Thank you for the tips.
My workflow is like Herb's. I've intermittently tried to work in BiaB or RealBand, but *for me* importing the stems to a DAW is far faster and more powerful than arranging a mix in one of the PGMusic products. There are users on these forums who have reached other conclusions with great sounding results.
DC Ron BiaB Audiophile Presonus Studio One ASUS I9-12900K DAW, 32 GB RAM Presonus Faderport 16 Too many guitars (is that a thing?)
The only thing I still haven't figured out about the volume automation is the MONO vs. STEREO track/channel view(s).
1. The tutorial view above shows the process in what it seems a MONO track view. However, 2. BB opens a selected track in a STEREO view which takes a lot of space/ doubles the view for all the edits
My preference would be to view the track being edited in the MONO view just like the tutorial. If there is a doing that I still haven't figured it out.
I have a different approach. I don't worry about the volume of anything in BB. I know I plan to move everything out of BB and into my DAW. In the DAW I have absolute control over everything from the volume, to the panning and the inclusion of any and all FX for each track.
I've been working this way since forever. I find it easier for me to do everything in the DAW and just let BB make the tracks, which it does exceedingly well.
+1
Biab makes the tracks. The Daw does the rest.
I use track level automation where necessary. It’s a quick easy to deal with a bar or two of a track you don’t want up front. I also like master level automation for the entire “band” for example, transitioning between intro, head, solos, outtro. Pushing the band up and down a db or two really helps give the song a little snap.
biab2026(Mac) Latest Build Mac OS (Latest) Apple Mac Mini M2 pro 32GB Ram Logic Pro (latest or pretty close) Blue and White Sea Star
[quote=Guitarhacker]I have a different approach. I don't worry about the volume of anything in BB. I know I plan to move everything out of BB and into my DAW. In the DAW I have absolute control over everything from the volume, to the panning and the inclusion of any and all FX for each track.
I've been working this way since forever. I find it easier for me to do everything in the DAW and just let BB make the trac
+1
Biab makes the tracks. The Daw does the rest.
I use track level automation where necessary. It’s a quick easy to deal with a bar or two of a track you don’t want up front. I also like master level automation for the entire “band” for example, transitioning between intro, head, solos, outtro. Pushing the band up and down a db or two really helps give the song a little snap.
Yep.
Could I do it all in BIAB? Certainly but I have far more control exporting the tracks to Digital Performer which I’d been using nearly 20 years before BIAB and going from there—faster, too.
BIAB 2025 Audiophile Mac 24Core/60CoreGPU M2 MacStudioUltra/8TB/192GB Sequoia/Tahoe, M1 MBAir, 2012 MBP Digital Performer11, Logic, Finale27/Dorico/Encore/SmartScorePro/Notion6/Overture5
< The issue: The sound volume of some instruments fluctuates too much between different song parts. > << The need: I want to be able to adjust the volume of guitar 2 IN THAT SECTION OF THE SONG (chorus 1) to be even with the overall volume of the song. So far I have only been able to adjust the volume of guitar 2 in the "Mixer Instrument Tracks" BUT, doing so adjust the volume for the entire song NOT just chorus 1. How do I adjust the volume of guitar 2 just for that specific part of the song (chorus 1)? >>
There's multiple ways to address your need using BIAB. Volume automation is one way but there are several different features in BIAB that can also do it.
BIAB has an advanced feature called the RealTrack Medley Maker that will not only allow you to balance the volume, but adjust the panning, and mute and unmute, of up to eleven RealTrack instruments at once. Further, because of the BIAB's reading ahead capability to determine what RealTrack data to select for each RealTrack instrument, BIAB is aware of forthcoming outro's of one instrument interacting with the second instrument beginning to play its intro prompting BIAB to automatically create a "smooth transition" between the two instruments.
A user can instruct BIAB to apply these processes and it will literally render a finished and arranged track that replicates exporting and editing multiple tracks in a DAW. It will create your arrangement automatically and it can be modified completely to meet the user's arrangement considerations.
Each of the 24 Mixer Tracks has the RealTrack Medley Maker. Each of the 24 tracks can hold up to eleven RealTracks, each independent from the other 23 Mixer tracks.
Most users don't know they can generate, control, manipulate, and program as many as 264 RealTracks, arranged as they have directed, all in a single render.
To load both guitars onto a Mixer Channel using the RealTrack Medley Maker:
Select the Mixer channel of one guitar. Open the RealTracks StylePicker, to open the RealTrack Medley Maker; It's located located in the RealTracks Picker under the Settings Button.
Then complete your arrangement for muting, panning and volume adjustment in that dialog window and BIAB will generate those two instruments in the arrangement you programmed.
I've attached a screen shot example of two instruments playing on the same Mixer Channel and alternating every four bars at first and then having four bars of silence between the two instruments alternating with each other.
With the release of Band-in-a-Box® 2026 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll keep this forum post updated so you can easily find all the latest videos in one convenient spot.
Whether you're exploring new features, checking out the latest RealTracks or Style PAKs, this is your go-to guide for Band-in-a-Box® 2026.
Band-in-a-Box® 2026 for Mac is here and it is packed with major new features! There’s a new modern look, a GUI redesign to all areas of the program including toolbars, windows, workflow and more. There’s a Multi-view layout for organizing multiple windows. A standout addition is the powerful AI-Notes feature, which uses AI neural-net technology to transcribe polyphonic audio into MIDI—entire mixes or individual instruments—making it easy to study, view, and play parts from any song. And that’s just the beginning—there are over 100 new features in this exciting release.
Along with version 2026, we've released an incredible lineup of new content! There's 202 new RealTracks, brand-new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two new RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Special Offers
Upgrade to Band-in-a-Box® 2026 for Mac and save up to 50% on most upgrade packages during our special offer—available until May 15, 2026. Visit our Band-in-a-Box® packages page to explore all available upgrade options.
2026 Free Bonus PAK & 49-PAK Add-ons
Our Free Bonus PAK and 49-PAK are loaded with amazing add-ons! The Free Bonus PAK is included with most Band-in-a-Box® 2026 for Mac packages, but you can unlock even more—including 20 unreleased RealTracks—by upgrading to the 2026 49-PAK for just $49.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean