|
Log in to post
|
Print Thread |
|
|
|
|
|
RealBand
|
Joined: Mar 2010
Posts: 18
Enthusiast
|
OP
Enthusiast
Joined: Mar 2010
Posts: 18 |
Hello, I have been using RealBand for a year or so, but mostly for jamming accompaniment.
Today, I actually started recording a live lead guitar track against my RealBand (audio) tracks. When I go to play back the recording, the solo appears to be just a hair out of sync from the Real tracks, and essentially makes the recording unlistenable.
Does anyone have any insights as to what may be the problem?
Just to give some idea of my setup, I have a .SEQ file with 2 RealTracks tracks: RT379 (Bass Guitar), RT378 (Acoustic Guitar), and 1 RealDrums track: CountryTrain RealDrums. When the tracks are playing by themselves, they sound fine. When I record the live guitar lead track on top of those (using the blank Track 4), it sounds good until I play it back. The tempo is 120 bps, I am listening to the tracks (the 3 pre-recorded Real audio tracks and the recording lead guitar track) on headphones plugged into my laptop. The lead track is generated by placing a directional mike in front of my amp, and that mike is plugged into the audio input of my laptop.
Any response is greatly appreciated! Thanks!
Tim
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,148
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,148 |
Check options-preferences-audio tab and click the drivers button and see what is selected.
Try to find the direct driver to the input, rather than using soundmapper or such.
Recorded latency is often due to settings in the driver window or the audio tab.
Quick fix- highlite the whole track, hold the ctrl key down and 'grab' the track and slide it to where you want it.
If it won't slide ahead, 'unselect' a portion of the track so there is room to slide it ahead. (can't slide a track past the beginning)
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Mar 2010
Posts: 18
Enthusiast
|
|
OP
Enthusiast
Joined: Mar 2010
Posts: 18 |
Thanks rharv. Hmm.. It is not allowing me to switch to the non-MS Sound Mapper driver on the input side (although for some reason it lets me on the output side).
How do I attach a screenshot to show you this??
In other words, in the Audio Drivers dialog, on the Audio Input Driver(s) box (left side of dialog), I have two drivers: "Microsoft Sound Mapper" and "Microphone (Realtek High Defini". When I select only "Microphone (Realtek High Defini", and then click the "Move selected Devices to Top" button, nothing happens. However, it does allow me to swap the two drivers on the output side.
ANy other ideas are appreciated! Thanks again!
Tim
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,148
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,148 |
It only moves the right side. As long as the left side has the mic input as the *only* thing highlited it should work.
Try recording now..
If you still have the latency, you may need an audio interface.
If you don't hear the latency, do you have a line out of the amp being used? It may sound better than the mic...
Last edited by rharv; 10/15/10 01:00 PM.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Mar 2010
Posts: 18
Enthusiast
|
|
OP
Enthusiast
Joined: Mar 2010
Posts: 18 |
Hi, sorry for the delay in reply (been sick). Unfortunately, I still have the latency even when changing which audio input driver is selected. I have also tried manually shifting the track (grab, slide, etc.) which I am finding too difficult to finesse for my purposes.
You mentioned that if I still have a latency, I may need an audio interface or use the extra line-out on amp. I do have an extra line out, but don't see what good that would do as I still have to record onto track via some input on my laptop (and I have established that both input drivers introduce latency). Unless I am misunderstanding you here?
I am up for an "audio interface", but don't understand what you mean by that, nor how anything would be able to get around having to go through one of the other of the audio drivers on my laptop. Any elaboration is greatly appreciated. Thanks again!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,148
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,148 |
I siad "If you don't hear the latency, do you have a line out of the amp..." So it wasn't meant as a suggestion to avoid latency. Audio Interface; such as one connecting via USB would avoid the soundcard in the machine altogether. http://www.sweetwater.com/c695--USB_Audio_InterfacesFind one in the budget, then ask a few questions to see if anyone here has used it or had problems with it.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Mar 2010
Posts: 18
Enthusiast
|
|
OP
Enthusiast
Joined: Mar 2010
Posts: 18 |
Sorry, I misunderstood what you meant about the line-out..
Ah, ok, I understand. I should look for a audio interface that has (perhaps) a usb interface and (in theory) allows me to bypass the audio drivers altogether (since the mic input on the laptop goes through the audio drivers).
I will investigate this more thoroughly. I greatly appreciate your time rharv. Tim
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Mar 2010
Posts: 18
Enthusiast
|
|
OP
Enthusiast
Joined: Mar 2010
Posts: 18 |
If I were get an audio input interface device, and it provides me a USB connector on my laptop, how will realband (1) be aware that an audio signal is there to use, (2) know to disregard any input coming across the input drivers and use this signal instead? Thank you.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,148
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,148 |
That is what the Audio drivers window in Realband is for; to select which drivers are enabled and which are priority (in order) if more than one is used.
It is 'aware' of the possible options because the devices are installed as sound devices inside the operating system; RB just asks the system for the available devices and drivers.
I assume your notebook is fairly recent and has USB2 ports available. You may even have firewire another option.. you never mentioned what the system was.
Last edited by rharv; 10/26/10 03:02 PM.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box 2025 Italian Version is Here!
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box 2025 - Italiano
RealBand 2025 - Italiano
Band-in-a-Box 2025 French Version is Here!
Bonjour à tous,
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
BIAB 2025 - francisation
RealBand 2025 - francisation
Voilà, enjoy!
Band-in-a-Box 2025 German Version is Here!
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Stay up to date—get the latest update now!
Update to RealBand® 2025 Build 5 Windows Today!
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
Get the latest update today!
PowerTracks Pro Audio 2025 for Windows is Here!
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
www.pgmusic.com/powertracks.htm
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
Band-in-a-Box® for iOS® :Summary video.
Check out the forum post for more information.
|
|
|
|
|
|
|
|
|
|
|
|
Forums58
Topics84,122
Posts775,540
Members39,584
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean