Previous Thread
Index
Next Thread
Print Thread
Go To
Page 1 of 2 1 2
Band-in-a-Box for Windows
Joined: Feb 2008
Posts: 826
pwarren Offline OP
Expert
OP Offline
Expert
Joined: Feb 2008
Posts: 826
I have seen statements like this 'all the real cool articulation and human phrasing ... has to be put in using a controller or manually' a number of times on these forums and, although I understand the concept in general terms, I don't quite get the specifics.

Does this refer to playing in a track from a controller OR is there a way to just add pitch bends etc. to a midi melody or solo track that has been generated by BiaB? If the latter, how does one do that? Does the midi out from BiaB get affected by the controller as it passes thru to the sound module? I guess I could just try it but I'm betting if this is possible there's plenty of setup required at the controller.

Any help appreciated.


BiaB 2013 b366, RB 2013 b4, WinXP Pro SP3, Toshiba M70, 1.8GHz 2GB RAM 100GB HD. Focusrite Saffire 6 USB, Ketron SD2.BiaB Wiki
Band-in-a-Box for Windows
Joined: Feb 2008
Posts: 826
pwarren Offline OP
Expert
OP Offline
Expert
Joined: Feb 2008
Posts: 826
Thinking about this further I can see IF it's possible at all I'd have to be recording the changed midi back to the solo track. I think that eliminates the possibility of using the Ketron since the output is audio. But even using the VSC DXi would be fine since I could change the sound source later.


BiaB 2013 b366, RB 2013 b4, WinXP Pro SP3, Toshiba M70, 1.8GHz 2GB RAM 100GB HD. Focusrite Saffire 6 USB, Ketron SD2.BiaB Wiki
Band-in-a-Box for Windows
Joined: Jan 2003
Posts: 5,120
Veteran
Offline
Veteran
Joined: Jan 2003
Posts: 5,120
You can add pitch bends in the "Piano Roll" editor. Make sure to have the midi track on either the melody or soloist channel there. Once you have added the bends, be sure to hi-lite a note, then "select all" and re-channel the data and notes to either 4 for melody or 8 for soloist.

That way, your hard work will not be overwritten when you press the play button.

You can draw in the pitch bends manually via the pencil there. Usually, the bend will go from the center line up to the top, then across for a few ticks and back down to the center line. Looks sort of like a bridge when done correctly. If you leave the "down" line above or below the center line, the note will be sharp (above) or flat (below). You have to have a note present in order to do a bend.

Trial and error.

Try and find a midi with guitar bends as an example, before you edit your song. And don't forget to save your midi prior to making ANY edits. You don't want to overwrite a good part.

Trax

Band-in-a-Box for Windows
Joined: May 2000
Posts: 38,502
M
Mac Offline
Veteran
Offline
Veteran
M
Joined: May 2000
Posts: 38,502
You can add Pitch Bend, Modulation and a few other MIDI parameters to the MIDI tracks using the Controller dropdown in the Pianoroll view, drawing them in the bottom window.

You can also RECORD them from a keyboard controller overtop of existing MIDI tracks as well, in realtime. My preferred method.

Ketron SD2 responds to the standard MIDI Controller data for these things.


--Mac

Band-in-a-Box for Windows
Joined: Feb 2008
Posts: 826
pwarren Offline OP
Expert
OP Offline
Expert
Joined: Feb 2008
Posts: 826
Quote:

You can also RECORD them from a keyboard controller overtop of existing MIDI tracks as well, in realtime. My preferred method.




Hi Mac. This is what I'm interested in. So how do I go about it? Say I have some midi on the melody track. Do I play it out the midi port connected to my controller and record it to the solo track with the midi in from my controller?

What about the 'send midi thru to midi out' setting? Should this be on or off?

Is there a section in the BiaB manual I should look for? I'm not sure of the terminology here.

Thanks.


BiaB 2013 b366, RB 2013 b4, WinXP Pro SP3, Toshiba M70, 1.8GHz 2GB RAM 100GB HD. Focusrite Saffire 6 USB, Ketron SD2.BiaB Wiki
Band-in-a-Box for Windows
Joined: Jan 2003
Posts: 5,120
Veteran
Offline
Veteran
Joined: Jan 2003
Posts: 5,120
You will have to actually play the notes while using the modulation wheel on your keyboard at the same time. You can't add bends to notes that are already scored, unless you write them in via notation.

Trax

Band-in-a-Box for Windows
Joined: Dec 2003
Posts: 23,276
Veteran
Offline
Veteran
Joined: Dec 2003
Posts: 23,276
Hi pwarren, I don’t use BiaB for recording as I use it as a scratch board and then bring the song into Sonar where I add all of my controllers and actual recordings. I know that in Sonar you can add any and all of the MIDI controller data via a midi controller over already recorded midi notes using the sound on sound command. I thought you could do the same thing in RealBand. I just tried it out and now I know you can. Click on the track that has your midi notes, click on the midi record button and move your keyboard controller knobs, sliders and buttons while the song is playing. RB will record your movements without erasing your notes, hence it is the same thing as Sonar’s sound on sound recording. You will end up with both the midi notes and CC/wheel data on the same track. You can use the piano roll view to edit any data on that track.

I see you have BiaB 2010.5 so I think you have RB also. I believe this is the only way to do this.

I hope this helps and good luck.


I got banned from Weight Watchers for dropping a bag of M&Ms on the floor.
It was the best game of Hungry Hippos I've ever seen!


64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Band-in-a-Box for Windows
Joined: Feb 2008
Posts: 826
pwarren Offline OP
Expert
OP Offline
Expert
Joined: Feb 2008
Posts: 826
Quote:

...I thought you could do the same thing in RealBand. I just tried it out and now I know you can. Click on the track that has your midi notes, click on the midi record button and move your keyboard controller knobs, sliders and buttons while the song is playing. RB will record your movements without erasing your notes, hence it is the same thing as Sonar’s sound on sound recording. You will end up with both the midi notes and CC/wheel data on the same track. You can use the piano roll view to edit any data on that track.

I see you have BiaB 2010.5 so I think you have RB also. I believe this is the only way to do this.

I hope this helps and good luck.




Yep, that helps a lot. It wasn't important whether I use BiaB or RB, either will work for me.

One more question. Did you need to do anything special to set up your controller?

Thanks.


BiaB 2013 b366, RB 2013 b4, WinXP Pro SP3, Toshiba M70, 1.8GHz 2GB RAM 100GB HD. Focusrite Saffire 6 USB, Ketron SD2.BiaB Wiki
Band-in-a-Box for Windows
Joined: Dec 2003
Posts: 23,276
Veteran
Offline
Veteran
Joined: Dec 2003
Posts: 23,276
No, you will need nothing special. All the information you need is in the documentation that came with your controller. You may need to assign different CC numbers to your sliders and knobs as need be. For example if you want to control expression, CC11, you will need to assign a slider to CC11. All will be explained in your docs. Note that the pitch bend and modulation wheels come preset. However you may be able to change them if you need to. I can on mine but I never do; I keep them as is. I can save assigned configurations as presets on my controller. I do have different saved presets for my different soft synths that I have. However to keep things simple (note I need things simple) I always keep pan (CC10) on one knob and CC11 on one slider in all of my presets.

I hope this helps


I got banned from Weight Watchers for dropping a bag of M&Ms on the floor.
It was the best game of Hungry Hippos I've ever seen!


64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Band-in-a-Box for Windows
Joined: Jul 2000
Posts: 6,385
Veteran
Offline
Veteran
Joined: Jul 2000
Posts: 6,385
I pretty do the same as Mario, but I use Master Tracks Pro as my sequencer.

Details here:
http://www.nortonmusic.com/backing_tracks.html

A full list of the expressive continuous controllers can be found here:
http://www.nortonmusic.com/midi_cc.html

Notes ♫


Bob "Notes" Norton smile Norton Music
https://www.nortonmusic.com

100% MIDI Super-Styles recorded by live, pro, studio musicians for a live groove
& Fake Disks for MIDI and/or RealTracks
Band-in-a-Box for Windows
Joined: Feb 2008
Posts: 826
pwarren Offline OP
Expert
OP Offline
Expert
Joined: Feb 2008
Posts: 826
Thanks for the additional info MarioD. That helps a lot. My users manual that came with the PCR-M80 controller is quite cryptic. I'll have to really dig in to understand it. It is nice to know that the pitch bend and modulation is preset at the factory. That'll save me some work.


BiaB 2013 b366, RB 2013 b4, WinXP Pro SP3, Toshiba M70, 1.8GHz 2GB RAM 100GB HD. Focusrite Saffire 6 USB, Ketron SD2.BiaB Wiki
Band-in-a-Box for Windows
Joined: Feb 2008
Posts: 826
pwarren Offline OP
Expert
OP Offline
Expert
Joined: Feb 2008
Posts: 826
Thanks for the info Notes. The list of expression control codes is especially useful.


BiaB 2013 b366, RB 2013 b4, WinXP Pro SP3, Toshiba M70, 1.8GHz 2GB RAM 100GB HD. Focusrite Saffire 6 USB, Ketron SD2.BiaB Wiki
Band-in-a-Box for Windows
Joined: Dec 2003
Posts: 23,276
Veteran
Offline
Veteran
Joined: Dec 2003
Posts: 23,276
Quote:

Thanks for the additional info MarioD. That helps a lot. My users manual that came with the PCR-M80 controller is quite cryptic. I'll have to really dig in to understand it. It is nice to know that the pitch bend and modulation is preset at the factory. That'll save me some work.




It looks like your PCR-M80 is very similar to my Maudio Evolution MK-449C midi controller. If you need any help feel free to PM me.


I got banned from Weight Watchers for dropping a bag of M&Ms on the floor.
It was the best game of Hungry Hippos I've ever seen!


64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Band-in-a-Box for Windows
Joined: Jan 2003
Posts: 5,120
Veteran
Offline
Veteran
Joined: Jan 2003
Posts: 5,120
Thanks for that Mario. I will have to try it out and see if my keyboard will also do the same here.

Trax

Band-in-a-Box for Windows
Joined: Feb 2008
Posts: 826
pwarren Offline OP
Expert
OP Offline
Expert
Joined: Feb 2008
Posts: 826
A big thank you to MarioD. I tried out your instructions last night and you are indeed correct. There's no problem adding midi instructions to a track using a controller. That's a great ability to have. I don't play keys at all but I can twiddle knobs.

So a related and open question!

What midi instructions would be most effective to make guitar or brass tracks more realistic? Obviously a few bends, where appropriate, will help the guitars. What else do all you experts suggest?


BiaB 2013 b366, RB 2013 b4, WinXP Pro SP3, Toshiba M70, 1.8GHz 2GB RAM 100GB HD. Focusrite Saffire 6 USB, Ketron SD2.BiaB Wiki
Band-in-a-Box for Windows
Joined: May 2000
Posts: 38,502
M
Mac Offline
Veteran
Offline
Veteran
M
Joined: May 2000
Posts: 38,502
I keep one MIDI pedal connected and dedicated to CC11 Expression. Expression #11 works like a fader on the mixer board and CC7 Vol then works like the Master Fader on that mixer board. If CC7 is set to 90, then CC11 can go no higher than the overall 90, even if it is sending 127.

Overdubbing CC11's works well on Pads like Strings or Organ patches, also can be used to great effect with horn sections to add critical dynamics.

A lot of the free downloadable MIDI files use only CC7 for everything. Bah. Strip 'em out, add the onetime CC7 and then use separate CC11's recorded to each track to wake up the dynamics of a good sequence.

Dynamics are one of our few tools.

Use them.


--Mac

Band-in-a-Box for Windows
Joined: Feb 2008
Posts: 826
pwarren Offline OP
Expert
OP Offline
Expert
Joined: Feb 2008
Posts: 826
Quote:

I keep one MIDI pedal connected and dedicated to CC11 Expression. Expression #11 works like a fader on the mixer board and CC7 Vol then works like the Master Fader on that mixer board. If CC7 is set to 90, then CC11 can go no higher than the overall 90, even if it is sending 127.




Thanks Mac. I assume the expression would imitate the swell and fade of a guitar or horn etc. Sounds like that would be very useful.

To everyone, any other midi control codes you use?


BiaB 2013 b366, RB 2013 b4, WinXP Pro SP3, Toshiba M70, 1.8GHz 2GB RAM 100GB HD. Focusrite Saffire 6 USB, Ketron SD2.BiaB Wiki
Band-in-a-Box for Windows
Joined: Dec 2003
Posts: 23,276
Veteran
Offline
Veteran
Joined: Dec 2003
Posts: 23,276
As has been already mentioned volume/CC7, expression/CC11 and pan/CC10 are standard. Also standard on most synths, both hard and soft, are reverb/CC91, chorus/CC93, breath/CC2 and sustain/CC64. They’re may be others as I’m not at my music computer and my memory isn’t what is used to be!

Many other CC numbers will control whatever your synth says it controls. Your synth(s) will have a midi implementation chart with it. That will tell you what CC number controls what effect. For instance my faders 1-7 are set at CC12 thru CC18. On my B4II synth they control the Native Instruments Hammond draw bars thus creating different organ sounds while on my Garritan Jazz and Big Band things like Vibrato, aftertouch, horn key clicks, sax tongue growl etc. So you see the same CC numbers control different things depending on what synths you are using.

The bottom line is that you have to know what CC numbers control on your synth then assign those numbers to your controller. It’s really not a complicated as it sounds. Your manuals are your friends.

I hope this helps.


I got banned from Weight Watchers for dropping a bag of M&Ms on the floor.
It was the best game of Hungry Hippos I've ever seen!


64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
Band-in-a-Box for Windows
Joined: Feb 2008
Posts: 826
pwarren Offline OP
Expert
OP Offline
Expert
Joined: Feb 2008
Posts: 826
Quote:

As has been already mentioned volume/CC7, expression/CC11 and pan/CC10 are standard. Also standard on most synths, both hard and soft, are reverb/CC91, chorus/CC93, breath/CC2 and sustain/CC64. They’re may be others as I’m not at my music computer and my memory isn’t what is used to be!




I'm starting to get the picture a bit MarioD. The standard codes are implemented on all synths. Others are specific. Somehow I thought all defined codes were universal in the GM spec and that NRPN codes were synth specific.

So, good to know BEFORE I stick a bunch of control codes into a track and then change synth. My intent was to add some bends etc. to a guitar track while playing through the Ketron (to hear it) and then change to the sfz VST to use the much better sound fonts. Now I better check what sfz (and the soundfonts) support before jumping in.

Quote:

Your synth(s) will have a midi implementation chart with it.




Right. Definately a must do. Unfortunately most free soundfonts don't detail what samples are available and I don't yet fully understand the relationship between sfz and the soundfonts. I'll have to just experiment in this area.

Quote:

The bottom line is that you have to know what CC numbers control on your synth then assign those numbers to your controller. It’s really not a complicated as it sounds. Your manuals are your friends.



The way the PCR M-80 manual is written I'm not so sure it's anyones friend. I have to read it with google open to find definitions of every second word. lol


BiaB 2013 b366, RB 2013 b4, WinXP Pro SP3, Toshiba M70, 1.8GHz 2GB RAM 100GB HD. Focusrite Saffire 6 USB, Ketron SD2.BiaB Wiki
Band-in-a-Box for Windows
Joined: May 2000
Posts: 38,502
M
Mac Offline
Veteran
Offline
Veteran
M
Joined: May 2000
Posts: 38,502
Breath Controller CC is not supported by many synths, check the documentation for your particular synth before attempting that one.


--Mac

Previous Thread
Next Thread
Go To
Page 1 of 2 1 2

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
New RealTracks Released with Band-in-a-Box 2025!

We’ve expanded the Band-in-a-Box® RealTracks library with 202 incredible new RealTracks (in sets 449-467) across Jazz, Blues, Funk, World, Pop, Rock, Country, Americana, and Praise & Worship—featuring your most requested styles!

Jazz, Blues & World (Sets 449–455):
These RealTracks includes “Soul Jazz” with Neil Swainson (bass), Mike Clark (drums), Charles Treadway (organ), Miles Black (piano), and Brent Mason (guitar). Enjoy “Requested ’60s” jazz, classic acoustic blues with Colin Linden, and more of our popular 2-handed piano soloing. Plus, a RealTracks first—Tango with bandoneon, recorded in Argentina!

Rock & Pop (Sets 456–461):
This collection includes Disco, slap bass ‘70s/‘80s pop, modern and ‘80s metal with Andy Wood, and a unique “Songwriter Potpourri” featuring Chinese folk instruments, piano, banjo, and more. You’ll also find a muted electric guitar style (a RealTracks first!) and “Producer Layered Guitar” styles for slick "produced" sound.

Country, Americana & Praise (Sets 462–467):
We’ve added new RealTracks across bro country, Americana, praise & worship, vintage country, and songwriter piano. Highlights include Brent Mason (electric guitar), Eddie Bayers (drums), Doug Jernigan (pedal steel), John Jarvis (piano), Glen Duncan (banjo, mandolin & fiddle), Mike Harrison (electric bass) and more—offering everything from modern sounds to heartfelt Americana styles

Check out all the 202 New RealTracks (in sets 456-467)

And, if you are looking for more, the 2025 49-PAK (for $49) includes an additional 20 RealTracks with exciting new sounds and genre-spanning styles. Enjoy RealTracks firsts like Chinese instruments (guzheng & dizi), the bandoneon in an authentic Argentine tango trio, and the classic “tic-tac” baritone guitar for vintage country.

You’ll also get slick ’80s metal guitar from Andy Wood, modern metal with guitarist Nico Santora, bass player Nick Schendzielos, and drummer Aaron Stechauner, more praise & worship, indie-folk, modern/bro country with Brent Mason, and “Songwriter Americana” with Johnny Hiland.

Plus, enjoy user-requested styles like Soul Jazz RealDrums, fast Celtic Strathspey guitar, and Chill Hop piano & drums!

The 2025 49-PAK is loaded with other great new add-ons as well. Learn more about the 2025 49-PAK!

Bonus PAKs for Band-in-a-Box 2025 for Mac!

With your version 2025 for Mac Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons FREE! Or upgrade to the 2025 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!

These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!

This Free Bonus PAK includes:

  • The 2025 RealCombos Booster PAK: -For Pro customers, this includes 33 new RealTracks and 65+ new RealStyles. -For MegaPAK customers, this includes 29 new RealTracks and 45+ new RealStyles. -For UltraPAK customers, this includes 20 new RealStyles.
  • Look Ma! More MIDI 13: Country & Americana
  • Instrumental Studies Set 22: 2-Hand Piano Soloing - Rhythm Changes
  • MIDI SuperTracks Set 44: Jazz Piano
  • Artist Performance Set 17: Songs with Vocals 7
  • Playable RealTracks Set 4
  • RealDrums Stems Set 7: Jazz with Mike Clark
  • SynthMaster Sounds and Styles (with audio demos)
  • 128 GM MIDI Patch Audio Demos.

Looking for more great add-ons, then upgrade to the 2025 49-PAK for just $49 and you'll get:

  • 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyles,
  • FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
  • Look Ma! More MIDI 14: SynthMaster,
  • Instrumental Studies Set 23: More '80s Hard Rock Soloing,
  • MIDI SuperTracks Set 45: More SynthMaster
  • Artist Performance Set 18: Songs with Vocals 8
  • RealDrums Stems Set 8: Pop, Funk & More with Jerry Roe

Learn more about the Bonus PAKs for Band-in-a-Box® 2025 for Mac®!

New! Xtra Styles PAK 20 for Band-in-a-Box 2025 and Higher for Mac!

Xtra Styles PAK 20 for Mac & Windows Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!

We're excited to bring you our latest and greatest in the all new Xtra Styles PAK 20 for Band-in-a-Box! This fresh installment is packed with 200 all-new styles spanning the rock & pop, jazz, and country genres you've come to expect, as well as the exciting inclusion of electronic styles!

In this PAK you’ll discover: Minimalist Modern Funk, New Wave Synth Pop, Hard Bop Latin Groove, Gospel Country Shuffle, Cinematic Synthwave, '60s Motown, Funky Lo-Fi Bossa, Heavy 1980s Metal, Soft Muted 12-8 Folk, J-Pop Jazz Fusion, and many more!

All the Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 209 PAKs for $199 (reg $399)! Order now!

Learn more and listen to demos of the Xtra Styles PAK 20.

Video: Xtra Styles PAK 20 Overview & Styles Demos: Watch now!

Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 20 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.

New! XPro Styles PAK 9 for Band-in-a-Box 2025 and higher for Mac!

We've just released XPro Styles PAK 9 for Mac & Windows Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 29 RealTracks/RealDrums!

We've been hard at it to bring you the latest and greatest in this 9th installment of our popular XPro Styles PAK series! Included are 75 styles spanning the rock & pop, jazz, and country genres (25 styles each) that fans have come to expect, as well as 25 styles in this volume's wildcard genre: funk & R&B!

If you're itching to get a sneak peek at what's included in XPro Styles PAK 9, here is a small helping of what you can look forward to: Funky R&B Horns, Upbeat Celtic Rock, Jazz Fusion Salsa, Gentle Indie Folk, Cool '60s Soul, Funky '70s R&B, Smooth Jazz Hip Hop, Acoustic Rockabilly Swing, Funky Reggae Dub, Dreamy Retro Latin Jazz, Retro Soul-Rock Fusion, and much more!

Special Pricing! Until July 31, 2024, all the XPro Styles PAKs 1 - 9 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!

Learn more and listen to demos of XPro Styles PAKs.

Video: XPro Styles PAK 9 Overview & Styles Demos: Watch now!

XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.

New! Xtra Styles PAK 20 for Band-in-a-Box 2025 and Higher for Windows!

Xtra Styles PAK 20 for Windows & Mac Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!

We're excited to bring you our latest and greatest in the all new Xtra Styles PAK 20 for Band-in-a-Box! This fresh installment is packed with 200 all-new styles spanning the rock & pop, jazz, and country genres you've come to expect, as well as the exciting inclusion of electronic styles!

In this PAK you’ll discover: Minimalist Modern Funk, New Wave Synth Pop, Hard Bop Latin Groove, Gospel Country Shuffle, Cinematic Synthwave, '60s Motown, Funky Lo-Fi Bossa, Heavy 1980s Metal, Soft Muted 12-8 Folk, J-Pop Jazz Fusion, and many more!

All the Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 209 PAKs for $199 (reg $399)! Order now!

Learn more and listen to demos of the Xtra Styles PAK 20.

Video: Xtra Styles PAK 20 Overview & Styles Demos: Watch now!

Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 20 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.

New! XPro Styles PAK 9 for Band-in-a-Box 2025 and higher for Windows!

We've just released XPro Styles PAK 9 for Windows & Mac Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 29 RealTracks/RealDrums!

We've been hard at it to bring you the latest and greatest in this 9th installment of our popular XPro Styles PAK series! Included are 75 styles spanning the rock & pop, jazz, and country genres (25 styles each) that fans have come to expect, as well as 25 styles in this volume's wildcard genre: funk & R&B!

If you're itching to get a sneak peek at what's included in XPro Styles PAK 9, here is a small helping of what you can look forward to: Funky R&B Horns, Upbeat Celtic Rock, Jazz Fusion Salsa, Gentle Indie Folk, Cool '60s Soul, Funky '70s R&B, Smooth Jazz Hip Hop, Acoustic Rockabilly Swing, Funky Reggae Dub, Dreamy Retro Latin Jazz, Retro Soul-Rock Fusion, and much more!

Special Pricing! Until July 31, 2024, all the XPro Styles PAKs 1 - 9 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!

Learn more and listen to demos of XPro Styles PAKs.

Video: XPro Styles PAK 9 Overview & Styles Demos: Watch now!

XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.

Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support

Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.

Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support

Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins

Join the conversation on our forum.

Forum Statistics
Forums58
Topics84,392
Posts778,628
Members39,644
Most Online25,754
Jan 24th, 2025
Newest Members
daveg68, snares33, The Jam Shop, Hyke, bestbushcraft
39,644 Registered Users
Top Posters(30 Days)
MarioD 134
WaoBand 116
DC Ron 111
rsdean 84
dcuny 82
Today's Birthdays
rockin
Powered by UBB.threads™ PHP Forum Software 7.7.5