Can you explain how you did this, what tool you used, what the steps were to find these tools in the menu, and maybe circle some stuff in Paint with some arrows and stuff.
I would not know where to begin.
Sorry!! Maybe I am dense!!!
The tool I used: Audio Editor
The steps to find these tools in the menu: From the Main Chord Page Views Bar | Audio Editor Icon\ Select the Track and highlight audio
I guess I will watch the video and it will explain the steps and what you are using inside audio editor and how.
Thanks again.
David, it takes longer to explain it than to do it. Thus the video. Plus, there are multiple ways to do it according to the producers wants and needs on a project. The video is just over 4 minutes and I demonstrate two methods.
But in short, the two methods in the video is to either copy/paste a bar with a bad squeak with a bar from elsewhere in the song. Essentially, the same as doing a punch in recording. The second method is to actually punch in record. To do that, regenerate the offending bar using either the Audio Track or any Utility Track. It literally takes less than a minute to do either. The producer has the option to do multiple generations the same as if a session musician attempted multiple punch in's.
Doing the repair in BIAB's Audio Editor has many benefits. I'm sure you're aware of using Multi riffs in RealBand and when the seven riffs are generated, the menu gives you the option to have the riff start a few ticks early and continue a few ticks later. Well, the BIAB algorithm also seems to use this feature when it cross fades the cut in and cut out of the replacement audio. This is part of the creation of what PG Music has always called 'smooth transitions'. In other words, BIAB makes sure that at Punch in is seamless and works. I have seen this in the past and demonstrated to some other forum members since the addition of Utility Tracks, we can now see the actual WAV form and can observe the small area of changes in the Wave form sometimes during editing. You can see it more often if you change the actual chord to another chord. For instance, as a test, replace an F chord with a Dm chord and you're more likely to observe WAV form changes at the beginning and end of a bar.
Compare the two WAV forms in the earlier post. Even though I copy/pasted an existing chord, BIAB made audio changes beyond the Bar beginning and ending points while creating the 'smooth transition'...
Thanks! I appreciate that. Makes total sense. And it is "one way."
Something I have found with some Celtic tracks is they are squeaking all over the place, so I built the little tool I showed in the posted pics to "tame" them across the track in one fell swoop. It is doable.
I don't feel like buying RX 8 right now.
David Snyder Songwriter/Renaissance Man Studio + Fingers
i'm not trying to be a "smarty pants", but heres the quikest least mouse cliks i know david in case you had genned 2914 fp gtr in realband. and one reason of many je t'aime rb .
lets say on trak 15 in rb for arguments sake you genned 2914 , and you noticed for arguments sake bar 8 was squeaky. and was an em chord and also bar 14 is a good em chord no squeak . heres the QUIK TRIK. 1. bring up bars view in rb. 2. with mouse > clik on trak 15 bar 14 in rb bars view. (each bar is a little square). edit copy. 3. NOW with mouse > clik on trak 15 bar 8 (the bad bar), and edit paste..et voila done. ie paste overwrite.
i love bars view for this reeason. very simple. (you can also use rb audio editor of course like in bb) spend some time in bars view david and experimenting moveing chunks of audio and midi around its very powerfull. that one fix when i just did it took all of 2 secs to fix up 2914 one bar. best om ps...for powertraks users that might read this and assuming the latest version has bars view still. same deal.
Last edited by justanoldmuso; 10/11/2110:03 AM.
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
I think that is the first video I've seen you post. Nice job. The copy and paste from one bar to another is quick.
Here's a question for you. Can you use an unused Legacy track or the Audio track for the copy, paste and regenerate activities instead of a utility track?
<< Can you use an unused Legacy track or the Audio track for the copy, paste and regenerate activities instead of a utility track? >>
Yes, an unused Legacy Track or the Audio Track can be use for the copy/paste and regenerate activities rather than a Utility Track but I prefer to use Utility Tracks for the following reasons.
01. There are 16 Utility Tracks to only the single Audio Track. This is relevant because the Audio Track has more editing functions than Utility Tracks currently have. I think it's better to reserve the Audio Track for more advanced processes when possible. 02. It can be done on a Legacy Track but the process takes longer because there are additional steps to complete the task using a Legacy Track.
Good points. However, my video instructions addressed the fix based on the circumstances presented by the original poster. He used BIAB not RealBand and it appears his project likely had more than a single bar that contained fret squeaks so his situation would likely need to have multiple occasions to copy/paste or regenerate the track.
Yes, it makes perfect sense to do this in RealBand had the project been started or already resided in the RealBand program. Other than those reasons, it's more practical to do this in BIAB.
01. The time required to export just the single track in the Style and import it into RealBand would take more time than the fix would require using BIAB. 02. If he regenerated that track in RealBand, RealBand accesses and works in conjunction with BIAB to generate tracks and partial tracks. Thus, it's more logical to do it in BIAB. 03. If the poster saved the BIAB project and then opened that file in RealBand, again, that process alone takes longer than it would take to fix the problem in BIAB. 04. In addition, were the poster completely satisfied with the track other than the squeaks and had frozen that track, opening the file in RealBand would cause that frozen track to be lost because RealBand doesn't recognize and preserve tracks that are frozen in BIAB. RealBand would generate a complete new version of all the tracks upon opening the BIAB file.
An interesting point about Legacy Tracks. Because the task of copy/paste between bars on a Legacy Track can be done without using or having Utility Tracks, it has been a task that could be completed in BIAB since 2015 without using external software programs.
Charlie. your excellent at helping folks with bb. no argument. and great kudos to you for your vast knowledge.and i admire how you donate your time to help people.
the only reason i post rb ideas/tips/triks sometimes is one never knows who is reading these forums. it might be a new user to pg who is exploring realband for the first time. and wondering if there was a solution in rb that was appropo.
i think even you will admit the forums are top heavy with biab posts/topics/solutions ? but there are those of us , like myself that like rb also,..because it TOO has somer pretty nifty triks and features, a lot actually...and just want to see rb prosper and develope further.
best regards/respect om
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
Charlie. your excellent at helping folks with bb. no argument. and great kudos to you for your vast knowledge.and i admire how you donate your time to help people.
the only reason i post rb ideas/tips/triks sometimes is one never knows who is reading these forums. it might be a new user to pg who is exploring realband for the first time. and wondering if there was a solution in rb that was appropo.
i think even you will admit the forums are top heavy with biab posts/topics/solutions ? but there are those of us , like myself that like rb also,..because it TOO has somer pretty nifty triks and features, a lot actually...and just want to see rb prosper and develope further.
best regards/respect om
No problem. So far, you and I are the only posters in this thread to have recommended PG Music products and its good we've both taken the time to submit a recommendation. I have no issue with anyone's recommendations or the solutions offered. All of them have merit. Most are dependent on individual workflow and not necessarily to how nifty a trick they are or how much someone has invested into an external software that emulates external hardware to artificially manipulate audio. That said, particularly for new users, which this is the original poster's first post, RealBand isn't the niftiest trick... BIAB's Audio Editor is for this problem. But every method that's been offered has merit and any one of them could be what's eventually chosen by the poster and others that may have a similar issue.
In regard to posts/topics and solutions I disagree there are too many about BIAB. BIAB is the flagship and all of the other PG Music is linked and dependent to BIAB. I speculated when posting my tip that most users would be unaware that this issue could be handled within the BIAB program in about 15 seconds. I didn't give consideration to RealBand because I didn't know what version the poster uses. It's irrelevant as this technique can applied to both Mac and PC as well as to every year and model version back to 2015.
This fix works nearly identically in RealBand so your suggestion is relevant and useful giving the original poster and any other reader of these comments the ability to choose any of the methods mentioned in this thread in relation to what they find to best fit into their personal workflow. Your tip to use RealBand is just as reasonable and useful as mine. Thanks for posting it.
So.... A lot of guys who work with midi spend hours trying to add squeaks and fret noise in the proper places to make it sound more realistic.
The easiest way I can think of to eliminate the noise you don't want is to use volume envelopes on the track. Zooming in helps. That makes the squeaks and fret noise easier to see and isolate. The TWO ways I would do this, and both involve reducing the noise, are muting and volume control.
I often do this in my DAW, simply because it's easier to do there.
An envelope is my go to. First, add a volume envelope to the track. When the noise appears.... simply zoom in to see the noise in the bar.... then drop three nodes.... one immediately before, one immediately after, and one on the peak. Pull the peak down. This method allows you to keep some of the noise, as the noise does in fact add realism to the track. However, by pulling the peak down, you have reduced the level substantially. If you want it gone... use 4 nodes and pull it out start to finish. Again zoom in... drop two nodes before and two nodes after. Pull the center down. Since most of the squeaks and fret noise are very short duration events.... milliseconds in most cases, the loss of the track audio is not even audible for that event. You can also use a "process audio"... "mute" event for the same purpose. Drag through the event in a DAW and mute it.
This is also really good to use for lip smacks, and breath noises in vocal tracks as well as anything else that clicks or pops in a track that needs to be removed.
Once you get the hang of working in this way, you can literally clean up a track in a matter of just a few minutes.
You can find my music at: www.herbhartley.com Add nothing that adds nothing to the music. You can make excuses or you can make progress but not both.
The magic you are looking for is in the work you are avoiding.
Good tips Herb. I've used those techniques in both RealBand and Studio One in the past. I agree that times it's better to leave some realistic noise or small mistake in a song and volume envelopes work really in these cases. Zoomed in micro mutes are also effective.
I know you're more than comfortable doing these tasks in Sonar and there's no reason to suggest you do otherwise but for those that either don't use a DAW, or prefer to stay in BIAB as long as possible, I'd like to pass along that your methods are also very quick and easy to do in the BIAB Audio Editor. The process is similar to cut/paste and just about as fast.
The Audio Editor doesn't have a envelope track but it does have both gain and audio leveling at the same zoom levels as a DAW so any offending region can be selected and the volume reduced, muted or erased. I've previously demonstrated the BIAB Audio Editor can also quickly copy new audio from somewhere else in the track or from another track or regenerate new audio if reducing a squeak, lip smack, breath or other noise isn't satisfactory.
The advantages of using Spectral Editing is one can get shy of any noise within a sound. Be it high or low or even somewhere in the middle. Say someone singing accidentally bumps the mic stand. The bump is in the middle of a really nice note. Using Spectral Editing one can get shy or create a reduction of the bump causing minimal damage to the note.
It is not alway possible or desirable to chop up an entire piece to get shy of unwanted noise. As for squeaks the really nice thing by using Spectral Editing it is very possible to edit the overbearing noise to something that sounds way more normal.
Just a thought
Tony
Last edited by Teunis; 10/14/2112:18 PM.
HP i7-4770 16GB 1TB SSD, Win 10 Home, Focusrite 2i2 3rd Gen, Launchkey 61, Maton CW80, Telecaster, Ovation Elite TX, Yamaha Pacifica 612 BB 2022(912) RB 2022(2), CakeWalk, Reaper 6, Audacity, Melodyne 5 Editor, Izotope Music Production Suite 4.1
The advantages of using Spectral Editing is one can get shy of any noise within a sound. Be it high or low or even somewhere in the middle. Say someone singing accidentally bumps the mic stand. The bump is in the middle of a really nice note. Using Spectral Editing one can get shy or create a reduction of the bump causing minimal damage to the note.
It is not always possible or desirable to chop up an entire piece to get shy of unwanted noise. As for squeaks the really nice thing by using Spectral Editing it is very possible to edit the overbearing noise to something that sounds way more normal.
Just a thought
Tony
You and Herb both make good points to the advantages of external DAW's and software Plugin solutions to fixing unwanted noise in tracks. At the same time, both of you illustrate to me why using the Audio Editor in BIAB is the best solution over every other option presented in this discussion. Various software solutions mentioned have been Melodyne, TDR-Nova, Spectral Editing, a de-esser with the Izotope RX "de-clicker and Spectro.
But the disadvantage to all of these methods became apparent to me when the analogy came to my mind between creating BIAB tracks in comparison to a live studio recording session where Plugins and DAWs are king. The disadvantage is none of the methods are correcting the problem at the source recording. Each of these methods are 'fixing it in the mix' like a recording engineer would be forced to do in a studio recording session because the session player has recorded their part and left the building. Best practice in recording is to get it right at the source. Correct it at the source and while your session artist is on the clock. BIAB can do this in the Audio Editor.
BIAB can punch in/overdub/regenerate glitches at the source before a track is ever sent out to a DAW to be used in a recording. Using the BIAB Audio Editor provides a pristine recorded audio RealTrack and none of the plugins or DAWs will have to be used to fix the track "in the mix" like a live recording session after the recorded track has been made and the session artist gone.
As important as having a clean and clear recorded audio track is BIAB's capability of creating smooth transitions that not only make seamless cross-fades. Every cross fade may have a small bit to both the preceding audio and the following audio of the inserted audio clip modified by the BIAB algorithm to blend the inserted audio to the entire track. This ability is confirmed by observing Multi Riffs can be instructed to begin a little early and end a little late. This is done by BIAB and is included automatically in the Audio Editor.
In other words, BIAB's artificial intelligence is creating a complex, professional quality arrangement from the insert in addition to simply inserting the audio clip.
I for one appreciate the thought and effort that all contributors have made here because I have learned some interesting tips and tricks I did not know before.
When I am doing any process, I appreciate having a number of options to choose from depending what I am doing, and want, and how much time I have.
The BIAB process will work also in Real Band, a tool I have mentioned at length in other posts.
I like RealBand because I can work fast in it, though some have told me I should never ever use RealBand, for any reason whatsoever, just because. Why, I am not exactly sure.
In this screen shot I generated a Celtic guitar. These tracks seem prone to squeaks, not sure why.
When I played it back, I found it was not just a squeak that bothered me, it was the phrasing and flow. It sounded choppy in some parts. (Just an example, mind you.)
So, I copied the track, and highlighted the first problem section in gray.
Then I did a regen on just that section. I am sure you can do this in audio edit in BIAB, but I prefer to work in RB for this kind of stuff.
It is easy. I think each person finds out eventually how they want to do stuff.
In do vocals in RealBand and will sometimes do 12 takes of the main vocal, then create a final vocal master track and just clip in the parts like.
This takes me about 5 to 10 minutes. (The final cut and paste.)
Again, I am sure each person uses various tools and techniques and settles on what is best for them.
Peace out.
David Snyder Songwriter/Renaissance Man Studio + Fingers
"At the source" 100% agreement. There are quite a few problems with RealTrack when it comes to clicks, clangs, squeaks and worse. Almost all can be managed and "work arounds" abound but getting it right at the source is key to a good workflow and good result. It's obviously cheaper to employ a software/code writer to fix some of these things than it is to hire a player, engineer and room to get it right though.
Cheers rayc "What's so funny about peace, love & understanding?" - N.Lowe
Last Chance! The Band-in-a-Box® 2026 for Mac® Special Ends Today (May 31, 2026) at 11:59pm PDT!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Mac® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PDT today!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Mac®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the amazing new AI-Notes feature, which can transcribe polyphonic audio into MIDI. View the results in notation or play them back as MIDI, and choose whether to transcribe an entire track or transcribe specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Mac®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, and much more!
Upgrade your Band-in-a-Box for Mac® to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 Mac upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 Mac Special Offers Extended Until May 31st!
Good news- we've extended our Band-in-a-Box® 2026 for Mac® special offers until May 31, 2026!
Band-in-a-Box® 2026 is packed with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can transcribe an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Mac®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PDT on May 31st, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Check out the Band-in-a-Box® for Mac packages page to find the best package for you.
Today's the Last Day of the Band-in-a-Box 2026® for Mac Special!
Order before 11:59pm PDT today (May 15, 2026) to save up to 50% off your Band-in-a-Box® 2026 for Mac® upgrade and receive a FREE Bonus PAK loaded with great new Add-ons to use with this new version!
Band-in-a-Box® 2026 for Mac - Special Offers End at 11:59pm PDT on Friday, May 15th, 2026!
Order before 11:59pm PDT on Friday, May 15th and SAVE up to 50% on most Band-in-a-Box® version 2026 for Mac Upgrade packages... and that's not all! With your version 2026 for Mac purchase, we'll include a Bonus PAK full of great new Add-ons FREE! Upgrade to the 2026 49-PAK to receive even more NEW Add-ons including 20 additional RealTracks... that's 222 NEW RealTracks available with version Band-in-a-Box® 2026 for Mac!
Upgrade to Band-in-a-Box® 2026 for Mac® today for as little as $49! Check out the Band-in-a-Box® packages page for all available purchase options.
Learn more about the Free Bonus PAK and 49-PAK here.
If you have any questions about which package is the best option for you, just let us know. We're here to help!
202 New RealTracks Released with Band-in-a-Box 2026!
With Band-in-a-Box® 2026, we've released 202 incredible new RealTracks (in sets 468-488) in a variety of genres—featuring your most requested styles!
Jazz, Funk & World (Sets 468-475):
Our new jazz, funk & blues RealTracks include a groovin’ collection of RealTracks and RealDrums! These include more requested “soul jazz” RealTracks featuring artists Neil Swainson (bass), Charles Treadway (organ), Brent Mason (guitar), and Wes Little (drums). There are new “smooth jazz” styles (4), which include a RealTracks first: muted trumpet, as well as slick new smooth jazz brushes options for drums. Blues lovers will be thrilled—there are more “classic acoustic blues” styles, including guitar (5), bass (4), and drums (10) with blues master Colin Linden, featuring understated and tasty background acoustic soloing, plus brushes drums and acoustic bass. There are also new electric blues RealTracks, including electric blues with PG favorite Johnny Hiland (3) and soulful electric slide guitar from Colin Linden (4). If you love funk & gospel, there are great new options this year, including gospel organ (3) from Charles Treadway, as well as new funk, tango, and rock ’n’ roll drums (3) and bass (1). And for big, bold arrangements, we have uptempo soul horns (4) featuring a three-part hip horn section with options for a full mix or stems of each individual horn — plus an accompanying rhythm section (4) of drums, bass, guitar, and electric piano!
Rock & Pop (Sets 476–482):
Our new rock & pop RealTracks bring a powerful mix of requested favorites, fresh genres, and modern chart-inspired styles! We have more of our popular “Producer Layered Acoustic Guitars (15)” featuring Band-in-a-Box favorite Brent Mason. We’ve continued our much-requested disco styles (10), and added new Celtic guitar (5) with a more basic, accessible approach than our previous Drop-D or DADGAD offerings. There are also highly requested yacht rock styles (17), inspired by the smooth, polished soft-rock sound of the late ’70s and early ’80s — laid-back grooves, silky electric pianos, warm textures, elegant harmonic movement, and pristine production aesthetics. Fans of heavier styles will love our new glam metal (13), capturing the flashy, high-energy sound of ’80s arena-ready guitar rock. We also have a set of rootsy modern-folk rock (18), with a warm, organic sound combining contemporary folk textures and driving acoustic strumming. And we’ve added lots of new modern pop styles (16) — the kinds of sounds you’re hearing on the radio today, featuring exciting new drums, synths, and cutting-edge RealTracks arrangements.
Country, & Americana (Sets 483–488):
Our new country & Americana RealTracks deliver a rich collection of acoustic, electric, and roots-inspired styles! We have new country pop (9) with legendary guitarist Brent Mason. There is also a potpourri (14) of bouzouki, guitars, banjo, and more, perfect for adding texture and character to contemporary acoustic arrangements. We’ve added funky country guitar (5) with PG favorite Brent Mason, along with classic pedal steel styles (5) featuring steel great Doug Jernigan. There are more country songwriter styles (8) that provide intimate, rootsy foundations for storytelling and modern Americana writing. Finally, we have “background soloing” acoustic guitar (12) with Brent Mason — simpler, but still very tasty acoustic lines designed to sit beautifully behind vocals or act as a subtle standalone solo part.
And, if you are looking for more, the 2026 49-PAK (for $49) includes an impressive collection of 20 bonus RealTracks, featuring exciting and inspiring additions to add to your RealTracks library. You'll get new country-rhythm guitar styles from PG Music favorites Johnny Hiland and Brent Mason, along with modern-pop grooves that capture today’s radio-ready sound! There are also new indie-folk styles with guitar, bass, 6-string bass used as a high-chording instrument, acoustic guitar, and banjo. Plus, dedicated "cymbal fills" RealDrums provide an added layer that work very well with low-key folky styles with other percussion.
The 2026 49-PAK is loaded with other great new add-ons as well. Learn more about the 2026 49-PAK!
2026 Free Bonus PAK & 49-PAK for Band-in-a-Box® 2026 for Mac®!
With your version 2026 for Mac Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
MIDI SuperTracks Set 46: Piano & Organ
Instrumental Studies Set 24: Groovin' Blues Soloing
Artist Performance Set 19: Songs with Vocals 9
Playable RealTracks Set 5
RealDrums Stems Set 9: Cool Brushes
SynthMaster Sounds Set 1 (with audio demos)
iOS Android Band-in-a-Box® App
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
MIDI SuperTracks Set 47: More SynthMaster
Instrumental Studies 25 - Soul Jazz Guitar Soloing
Artist Performance Set 20: Songs with Vocals 10
RealDrums Stems Set 10: Groovin' Sticks
SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean