Band in a box has been used for some time. I mainly use BB VST. I will replace the drum with ujam drum I found a problem. There are a lot of styles in band in a box, but most of the combination routines are bass, drum and guitar (sometimes 2 or 3 guitars) I was wondering if the guitar would feel tacky with too many timbres, so I tried to replace it. Because now many music has no guitar element, just synthesizer. Sometimes when I remove some guitars and replace them with synth, I feel very modern. Different rhythm will make the music feel different Of course, I also like the combination of guitar and synth
Hmmm. Again, the main purpose of BiaB is to recreate the sound of real musicians playing real instruments.
The RealTracks in particular, are actual recordings of real musicians and real instruments, adjusted by software to match the pitch and timing of the chord progressions you define. There are MIDI data to go with these tracks, but that MIDI data is just an approximation to what the musician actually played, though it may well still help with what you want.
MIDI tracks and MIDI-Supertracks are intended to be actual MIDI and might better suit what you want, depending partly on whether the synth idea you have is polyphonic or a monophonic.
As far as synthesizer sounds go, there are countless synthesizers out on the 'Net that can be controlled by the MIDI you choose. In many ways, it's the "morphing" of the synthesis that sets its character, so controlling that is definitely (IMHO) a task for the producer, rather than a tool like BiaB.
Whether you use a software synthesizer or a physical synthesizer is probably personal preference.
I think, personally, that trying to include a rich set of moderns synthesizers into BiaB would, at best, be a never-ending process of "add a synth"; "it's too dated"; repeat.
I think you really need to find synthesizers on the 'Net' or from a hardware manufacturer to get the sounds you want, and then use BiaB's MIDI to control the notes and the DAW's automation to control any morphing. There are free software synthesizers out there, as well and a large number of commercial offerings.
Last edited by Gordon Scott; 10/25/2102:13 AM.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
SBMix. with resperct your approaching this wrong imho. you have a threadripper pc right. ryzen will eat realband for breakfast. try this method. 1. open realband (rb)...and config your asio interface. 2. layout your chords. 3. start auditioning midi styles. 4. when you find one you like , start right cliking over blank rb traks and gen midi bass/drum/synth traks whatever. at the same time plugging in modern sounding sample player and/or synth plug ins. ive already given you links to loads of free plug ins. 5. work on your modern arrangement till you get it right.
THEN later you can do further tests adding real traks if you wish. THE KEY IS RIGHT CLIK OVER A RB FREE TRACK AND YOULL SEE A BIG VERTICAL MENU. LOOK AT THE GENERATION OPTION...the beauty of rb is you have 48 traks. also a tip LEARN BARS VIEW, very usefull for moveing around midi bars/arrange as you want.
best om
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb.)
OM in all due respect there is nothing wrong with SBmix's approach. Note there is nothing wrong with your approach either.
I have done what SBmix has done. In fact in a song I will be posting soon I took a Celtic harp RT, used Melodyne to convert it to MIDI (the chart version of said RT was not correct), then used that MIDI track to control an orchestra harp. I have also used RTs converted to MIDI to control soft synths. Note that I did the conversions in my DAW Studio One Pro.
The bottom line is that there is usually more than one way to achieve your goals in BiaB, RealBand, and/or any other DAW.
YMMV
When you are at the checkout line and they ask if you found everything say "Why, are you hiding stuff?"
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
With all due respect to both of you, I don't believe the OP is looking for this or any other kind of advice. He says, "I found a problem." That problem is too many guitars & too many Jazz styles, and "too few modern synths" & too few Pop styles. He knows how to fix it for himself, but he wants to be really clear that this is a serious problem with BIAB: it's just too old-fashioned.
define old fashioned..........maybe BIAB isn't the program you want if you want a different kind of music.
if it doesn't do what you want try something else. i have a martin d35. it's not a stratocaster but i'm not accusing martin guitars of being old fashioned. in fact i've got a strat clone for when i want it. both are guitars but i choose the right one for the right job. maybe BIAB isn't right for the OP.
i just went thru the stylepicker useing the following filters. ultrapak 2020 no addons... funk 665 results rap 91 results modern 687 pop 3,553 tek 68 electro 57 edm 27 synth 603
i still say rb is the appropriate pg app cos of all the midi and plug in manipulation capabilities. as to limited synth capabilities i disagree. i have synth out the ying yangs includeing sforzando and free synths i got like dune and loads of others.
i really think folks any music genre can be done in biab or rb. ITS ALL IN THE METHODS YOU USE.imho. you can even start off with blank style in stylepicker and roll your own approach.
i really wonder if people saying biab and/or rb cant do certain moderrn styles//things have really delved into all the features of both at a deep level. let me say in the past with styles ages ago i would have agreed with the too many old/jazz styles comment. but in the last few years i really cant say that.
om
Last edited by justanoldmuso; 10/25/2110:59 AM.
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb.)
BIAB doesn't and shouldn't have to be all things to all people.
I'd go further than that ... there are literally hundreds of synthesizers out there, each with dozens of parameters that can be tweaked either to get a specific sound, or to get morphing sounds.
I cannot see any way that an application like BiaB could, or should, sensibly even try to replicate the countless, tending towards infinity, sounds and morphs that can be produced. It would, IMHO, be crazy even to try.
BiaB will send MIDI to a synthesizer. Use a synthesizer.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
Yes MIDI, as said audio is one type of sound that you can't change but only add FX to but with MidiSuperTracks or MidiUserTracks the sound can be unique and infinitely variable.
The keyboard style midi file will have Midi Section Markers Open the midi file in the Style Wizard Set the A section Set the B section Set A Fill Set B Fill Set what instruments go on each track
The Lyrics window will show the Midi Marker Sections
I don't know how you create the MultiStyles+ ? If I Edit the current Midi MultiStyle I can't see the C D sections. And can't see how to add Endings in the StyleWizard ? May have to ask in the Beginners Forum.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean