|
Log in to post
|
Print Thread |
|
|
|
|
|
Off-Topic
|
Joined: Sep 2007
Posts: 3,926
Veteran
|
OP
Veteran
Joined: Sep 2007
Posts: 3,926 |
Modern Toshiba Satellite, dual Intel 2.1 GHz/8/250, Vista Home Premium 64, TASCAM US-224 USB I/O, Real Band/Cubase VST/whatever.
I have successfully recorded before from on my desktop DAW using both RB and Cubase as well as Nuendo. Now I need to do a project on my laptop. Feel like a fool.
Recording a storyteller. One channel of mono audio. I'm getting level into the TASCAM and into Windows. I can't seem to get usable level into or out of either RB or Cubase. (It took me two hours to get anything out of either and I'm not sure what I did. I've been reduced to using MME drivers, even though both Cubase and the TASCAM are ASIO based.)
In Cubase I can make up some of the gain with compression, but that'll make it real noisy. I seem to be missing the gain knob that I would have on a hardware mixer.
I don't care what program I use, but I have a deadline. Help.
R.
"My primary musical instrument is the personal computer."
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Mar 2004
Posts: 1,031
Expert
|
|
Expert
Joined: Mar 2004
Posts: 1,031 |
First thing I would check is the recording levels in whatever driver software comes with the Tascam unit. You may find these are set too low.
Since I don't know that unit - I'm just guessing!
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2000
Posts: 27,507
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,507 |
Just checking:
double-click on the speaker icon, lower right, and check the Windows mixer levels.
BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Sep 2007
Posts: 3,926
Veteran
|
|
OP
Veteran
Joined: Sep 2007
Posts: 3,926 |
Quote:
I'm getting level into the TASCAM and into Windows.
I do have gain controls on the I/O and it's cranked. Likewise on its control panel. The Win mixer controls are all the way up, too.
"My primary musical instrument is the personal computer."
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
In RB do you have the Tascam set as the input device?
Can you peak the meters in the Tascam? What about in RB?
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
OK - don't feel stupid, but make sure you are actually using the TASCAM and not the built-in laptop mic/soundcard as the default sound device. I've made this mistake more than once as something decided my default device was not the external card.
Don't feel stupid if this is the mistake you made - it's easily done with a laptop if you use the lappy for more than just sound recording.
-Scott
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Feb 2010
Posts: 79
Enthusiast
|
|
Enthusiast
Joined: Feb 2010
Posts: 79 |
If all you're doing at first is recording voice, why not try audacity?
Daisy
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Taint the proggy. It's either the man or the interface.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Mar 2007
Posts: 1,342
Expert
|
|
Expert
Joined: Mar 2007
Posts: 1,342 |
Citaat:
In Cubase I can make up some of the gain with compression, but that'll make it real noisy. I seem to be missing the gain knob that I would have on a hardware mixer.
In Cubase select the channel you want to record on. Click on the VST audio channel settings (the e-sign you see on the right side of the track-name). Now you will see a window containing all the track settings. On the right-hand side make sure you've selected the correct input. Now beneath the input and output selection fields you will see a round knob. This is your input gain knob. Use <shift> to modify.
If you allready have recorded the event and have no option of re-recording it, you can increase the gain of the recorded signal. To do this <ctrl>left-click on all the parts you want to modify. Now right-click --> [process] --> [gain]. Here you can set the amount of gain you want to increase or decrease. This can be un-done, so no worries there.
Good luck!
Last edited by Mike sings; 12/02/10 03:10 PM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2000
Posts: 22,542
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,542 |
Same process can be done in RB-
Hilight section
Richt-click -> audio effects->gain change.(or edit-audio effects-gain change)
Check the button selections and try boosting the gain a few dB..
The symptoms sound like maybe windows soundmapper is involved, diverting the signal
As mentioned, make sure correct input drivers are selected (hilighted)in Pref->Audio and then click the 'move selected device to top' so it becomes the default device.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Sep 2007
Posts: 3,926
Veteran
|
|
OP
Veteran
Joined: Sep 2007
Posts: 3,926 |
This is frustrating. My kickass desktop DAW works perfectly. Problem is scheduling and ambient noise. I share a house and rarely have control of external noise. It would be extremely difficult to get the storyteller, who wants to read several books, here during those times when I am alone. (It's rarely a problem for my own work because most of what I do is electronic, and I can record voice whenever it's best.)
Hence the plan to use the laptop. I can take it to her place and record at our mutual convenience, if I can get the system to work properly.
John: I can light up the signal indicator on the I/O and occasionally get the peak light to flash. I also show good levels into the Windows mixer. I barely get any signal into either RB or Cubie.
Scott: I routinely change the input and output devices. (I even found a cool hack that lets me listen to one thing on headphones and another on external speakers connected to a docking station.) The US-224 is for certain sure set as the audio I/O.
Daisy: I'm willing to try anything, but I have used these programs and others elsewhere with good results. It's something I'm missing with this particular system. As John says above, it's either me or the hardware.
Mike: Cubase VST is a bundled version that came with the TASCAM and dates to 2004. It is fully functional except for having only one level of undo. (I am also familiar with its big brother, Nuendo, versons 1.0 through 4.xx.) I tried what you suggested. Either the gain knob is somewhere else or it doesn't exist in this version of Cubase.
I do appreciate the reminder about gain processing. Unless I can get at this issue from the front end, that's what I'll have to do.
Also, for the record, I have diagnosed two bad mic cords and replaced them with a tested and known-good piece. I wonder about the USB cable. As far as I know the TASCAM is USB 1.0, but if I can find a replacement I'll switch that out, too.
Still open to suggestions.
"My primary musical instrument is the personal computer."
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
When you double click on the speaker icon in the tray when the screen comes up does it say Tascam at the bottom left? If not click options/properties and using the drop down select the Tascam THEN set the recording & Playback properties. If it's not listed do a reinstall.
Did you actually install the Tascam onto the lappy?
Does it show as an input device in the audio prefs?
Do you get any signal to show on the meters in RB?How much?
Last edited by silvertones; 12/03/10 05:24 AM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Sep 2007
Posts: 3,926
Veteran
|
|
OP
Veteran
Joined: Sep 2007
Posts: 3,926 |
Quote:
When you double click on the speaker icon in the tray when the screen comes up does it say Tascam at the bottom left? If not click options/properties and using the drop down select the Tascam THEN set the recording & Playback properties. If it's not listed do a reinstall.
Did you actually install the Tascam onto the lappy?
Does it show as an input device in the audio prefs?
Do you get any signal to show on the meters in RB?How much?
Yes. Yes. Yes. Not yet. Getting something in Cubase that I may be able to work with using major dynamic gain processing.
Not important right now, but there's a good quarter second of latency when I put it in full duplex and monitor.
"My primary musical instrument is the personal computer."
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2009
Posts: 193
Apprentice
|
|
Apprentice
Joined: Jan 2009
Posts: 193 |
Ryszard,
If you have the monitor button clicked on then there will be a latency. At least that is what happens to me in Cubase.
Steve
Steve
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
Band-in-a-Box® 2026 for Windows® users: Build 1237 is now available!
Already a Band-in-a-Box 2026 for Windows user? Stay up to date and download the build 1237 to get all the latest additions and enhancements.
PowerTracks Pro 2026 for Windows is Here!
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Order now!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics86,061
Posts799,616
Members40,025
| |
Most Online44,367
Mar 4th, 2026
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean