Previous Thread
Index
Next Thread
Print Thread
Go To
RealBand
Joined: Jan 2009
Posts: 63
B
BurtB Offline OP
Enthusiast
OP Offline
Enthusiast
B
Joined: Jan 2009
Posts: 63
With BIAB 2014 (and RB) installed everything was working as it had been with 2013.

I use a Ketron SD4 external HW synth module.

I just had a chance to run some MIDIs after installing the patch for RB 2014.

Getting some very strange things:

1 - I think this might have actually started with 2014 before the patch update but I don't recall for sure. At the end of the MIDI (or when hitting stop) sometimes notes keep playing. It usually takes two hits of the panic button to stop them. I did NOT have this behavior with 2013 with the same exact MIDI files.

2 - When a MIDI starts most of the time it sounds horrible. Maybe one out of five will sound OK the first time. It is NOT a pitch bend sensitivity related issue. It often sounds like low quality SW synth instruments are being used is the best way to describe it. But I've double checked and the configuration is still set for the Ketron and no SW synth related checkboxes are checked. Usually this corrects itself if I just restart the MIDI playing. Sometimes it takes a couple of restarts. This did not happen with the base 2014 installation, so I think that this started with the RB 2014 patch install. Of course it could be something else.

Has anyone else experienced anything like this?

I guess if it is still acting up when I test it out tomorrow I'll have to call PG and talk with them, but thought I'd ask here in case someone else has seen something similar.

Thanks,
Burt

RealBand
Joined: May 2000
Posts: 22,165
Veteran
Offline
Veteran
Joined: May 2000
Posts: 22,165
"I guess if it is still acting up when I test it out tomorrow I'll have to call PG and talk with them"

If you can reproduce this tomorrow, please do contact support. I haven't seen this behavior myself, but letting them know is the first (important) step in getting it fixed.


I do not work here, but the benefits are still awesome
Make your sound your own!
RealBand
Joined: May 2000
Posts: 38,502
M
Mac Offline
Veteran
Offline
Veteran
M
Joined: May 2000
Posts: 38,502
Originally Posted By: BurtB


2 - When a MIDI starts most of the time it sounds horrible. Maybe one out of five will sound OK the first time. It is NOT a pitch bend sensitivity related issue. It often sounds like low quality SW synth instruments are being used is the best way to describe it. But I've double checked and the configuration is still set for the Ketron and no SW synth related checkboxes are checked. Usually this corrects itself if I just restart the MIDI playing. Sometimes it takes a couple of restarts. This did not happen with the base 2014 installation, so I think that this started with the RB 2014 patch install. Of course it could be something else.

Has anyone else experienced anything like this?



Hi Burt,

This old electronics guy would suspect that it might be time to try cleaning the audio and MIDI connections at their connection points. A wee spray of Deoxit or equivalent contact cleaner-lube onto a bit of lint-free cloth and remove each plug one at a time, wipe the connection points and lightly insert-remove-insert a couple of times while the good doo is still wetting the contacts to get a bit of mechanical wiping action as well. For MIDI plug, okay to spray a wee small dab of the goo stuff right into the end of the MIDI plug, not much, mind you, just enough to wet the pins, and then do the insert-reinsert thing. POWER OFF on everything when you do that, then start things up again and check operation. And be sure to do it for BOTH ends of all cable connections.

Everything you describe could be chalked up to connections not being pristine.


--Mac

RealBand
Joined: Apr 2009
Posts: 10,343
Veteran
Offline
Veteran
Joined: Apr 2009
Posts: 10,343
Check your driver mode to be sure it's on the right one.

Something changed mine to MME from ASIO. I had to change it back.

Not sure if it was a bad start up/crash or the installation on 2014 that did it.

My music sounded like it was grinding and played at a slower playback speed..... not all the time, but randomly.


You can find my music at:
www.herbhartley.com
Add nothing that adds nothing to the music.
You can make excuses or you can make progress but not both.

The magic you are looking for is in the work you are avoiding.
RealBand
Joined: Jan 2009
Posts: 63
B
BurtB Offline OP
Enthusiast
OP Offline
Enthusiast
B
Joined: Jan 2009
Posts: 63
Thanks Mac,

The MIDI interface is via USB. The connections have been cleaned just in case, but no difference.

It acts more like a software glitch rather than a HW issue unless the SD4 just picked this time to start flaking out.

For good measure I hooked the SD4 up to my notebook which still has 2013 on it. No problems there.

Switch back to the machine with BIAB and RB 2014 installed and the problem comes back.

Guess I'll need to talk with PG and see if they have any suggestions.

Burt

RealBand
Joined: Jan 2009
Posts: 63
B
BurtB Offline OP
Enthusiast
OP Offline
Enthusiast
B
Joined: Jan 2009
Posts: 63
Thanks,

The problem is with MIDI and not Audio. Audio tracks play just fine (e.g. .wav, .mp3, etc.).

It's the MIDI playback that is causing issues. But just in case I double checked and all is well with the audio device driver selection.

Burt

RealBand
Joined: May 2000
Posts: 38,502
M
Mac Offline
Veteran
Offline
Veteran
M
Joined: May 2000
Posts: 38,502
Try the Ketron being driven by any other MIDI output program you might happen to have, on the same machine that is giving the trouble. RealBand is one and comes with BB. Load a standard MIDI file and make sure the Ketron connect is set up as the default GM synth and give a quick listen.

This may help to isolate the problem.


--Mac

RealBand
Joined: Jan 2009
Posts: 63
B
BurtB Offline OP
Enthusiast
OP Offline
Enthusiast
B
Joined: Jan 2009
Posts: 63
Thanks Mac,

Ketron works fine with Reaper on the same machine with the same MIDI files. I should have mentioned this previously.

It really appears that this problem started after I installed the latest RB 2014 patch.

The problem is that the wrong patches are used when a new MIDI (inside a SEQ file) is loaded. I'm going to try the actual MIDI files and see if the problem persists or if it is only when the MIDI is in a SEQ file.

I have two files that clearly illustrate the problem and can repeat the problem. Neither file has any SysEx's or strange CC's in them. But all of the MIDIs that I try to play have the problem, and I have to click 2 times on Panic before I play them or some tracks are using the wrong Patch.

If I click on Panic 2 or 3 times before starting the MIDI it plays perfectly. If I stop and restart the MIDI it ususally plays properly after the 2nd or 3rd restart.

When I load a new MIDI the drum track always seems to be fine which is expected since channel 10 is dedicated to drums. But the other tracks may be using patches from the previous MIDI, or are just not properly registering the patch value that is sent by RB.

Some MIDIs you don't notice a dramatic difference, just that they don't sound "right". But some of them where radically different instrument patches are used are very noticable.

In one case the track that should have been playing rock organ was playing a Piano. And I could NOT change the patch and have the instrument change until I had stopped playing and clicked on Panic a couple of times. Then the patch change applied and all was well until the next MIDI was loaded.

I've been talking with PG and have sent them two files that illustrate what I'm seeing, but I believe that this is something in my configuration that is causing this to happen.

I've pretty much confirmed that it is something between RB 2014 (patched) and the Ketron via the USB to MIDI interface.

Since the Ketron is working fine from Reaper using the same exact USB to MIDI interface on the same machine I can rule out the USB to MIDI interface and the Ketron as being the source of the problem.

So I guess I'll have to see what PG comes back with for suggestions. If all else fails I'll unregister 2014, uninstall it, and do a completely fresh install. Test operation and then install the update patch again and retest.

If it still fails on this machine then I guess I'll have to roll back to 2013 and forget 2014 until PG fixes it.

Burt

RealBand
Joined: Jan 2009
Posts: 63
B
BurtB Offline OP
Enthusiast
OP Offline
Enthusiast
B
Joined: Jan 2009
Posts: 63
Some more details. I tried .MID files instaed of .SEQ files, as expected no difference. If I start RB fresh and then load a MIDI and try playing it the wrong patches are used until I stop and hit panic a couple of times then it plays OK until I load a new MIDI.

Double checked Reaper again. It plays perfectly multiple times switching between the two test files and when I stop the MIDI playback in Reaper at the same spots I stop in RB there are no stuck notes like I'm now getting in RB.

And the "product activation" in RB (and BIAB) every once in a while proclaims I'm not registered and some features are disabled when RB or BIAB starts. If I exit the program and restart then I don't get the "you are not registered" but it is annoying.

I've passed this information on to PG so we'll see what they come back with but it looks like there is a definite problem with RB 2014 (patched) on my system that is causing this problem.

Thanks,
Burt

Last edited by BurtB; 01/11/14 08:08 AM.
Previous Thread
Next Thread
Go To

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support

Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.

Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support

Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins

Join the conversation on our forum.

Band-in-a-Box 2025 for Mac Videos

With the release of Band-in-a-Box® 2025 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll also keep this forum post updated so you can easily find all the latest videos in one convenient spot.

From overviews of new features and walkthroughs of the 202 new RealTracks, to highlights of XPro Styles PAK 8, Xtra Styles PAKs 18, the 2025 49-PAK, and in-depth tutorials — you’ll find everything you need to explore what’s new in Band-in-a-Box® 2025.

Reference this forum post for One-Stop Shopping of our Band-in-a-Box® 2025 Mac Videos — we’ll be adding more videos as they’re released!

Band-in-a-Box 2025 for Mac is Here!

Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!

Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.

2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.

If you have any questions, feel free to connect with us directly—we’re here to help!

Band-in-a-Box 2025 Italian Version is Here!

Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.

Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.

Band-in-a-Box 2025 - Italiano
RealBand 2025 - Italiano

Band-in-a-Box 2025 French Version is Here!

Bonjour à tous,

Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music

Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:

BIAB 2025 - francisation
RealBand 2025 - francisation

Voilà, enjoy!

Band-in-a-Box 2025 German Version is Here!

Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!

Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!

Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:

https://nn.pgmusic.com/pgfiles/languagesupport/deutsch2025.exe
https://nn.pgmusic.com/pgfiles/languagesupport/deutsch2025RB.exe

Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!

Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.

Stay up to date—get the latest update now!

Forum Statistics
Forums58
Topics84,308
Posts777,565
Members39,615
Most Online25,754
Jan 24th, 2025
Newest Members
kottke, kaleu, Claudio Paolini, bjornen71, CATBELLOU
39,614 Registered Users
Top Posters(30 Days)
MarioD 141
zedd 119
DC Ron 106
WaoBand 105
rsdean 91
nonchai 87
Today's Birthdays
Manos
Powered by UBB.threads™ PHP Forum Software 7.7.5