|
Log in to post
|
Print Thread |
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
Well Gang,
Back again! LOL
Have another issue with PTPA-11 that I can't seem to find the answer to.
I would also like to invoke input monitoring so I can put some realtime reverb on my vocal as I record and be able to hear the reverb AS I am recording it. However the actual recorded track would prefer it be dry.
I have read several posts on how to do this including the FAQ's as noted below:
Enable Input Monitoring (ASIO Only) – When this checkbox is enabled (and ASIO is selected in the Driver Type combo) then PowerTracks will take the ASIO input signal from input port number 1 and send it to output 1 so that you will hear the input through the speakers. You can apply realtime effects to the monitored input by selected “
Input” in the top combo box of the DirectX/VST Realime Effects dialog. You can then select up to 4 DirectX or VST effects.
WARNING! - Do not enable this feature if the input port number 1 is set to record the output (e.g. “What you hear” or “Mix” )because enabling input monitoring in this case will cause massive feedback that could hurt your ears!
Allow IM Effects Recording – When this is enabled, and Input Monitoring is enabled, and effects plugins are enabled for input monitoring (as described above), the effected signal will be recorded instead of the dry signal.
What I cannot find anywhere in PTPA-11 is the part about:
You can apply realtime effects to the monitored input by selected “
Input” in the top combo box of the DirectX/VST Realime Effects dialog. You can then select up to 4 DirectX or VST effects.
Where do I find the top combo box of the DirectX/VST Realime Effects dialog??
I have tried every window, every menu, every sub-menu, every drop-down box, every pop-up box that I can find in PT-11 and cannot find this "combo box" that is referred to.
What am I missing???
Thanks,
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 22,457
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,457 |
Beside the track number is a small triangle/arrow - click that, then edit DXFX
there will be four FX slots available and one slot at the very top that shows the track number; change this to "Input Monitor" (way at the bottom of the dropdown list)
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
Thanks rharv for the response.
Actually I have been there and done that, but the top dropdown box showed all of my tracks listed and some other stuff as I scrolled down thru all of them but nowhere did I find a selection choice called "input monitor"--even at the bottom.
But I will look at it again this evening after work, and double check that I just possibly missed it somehow.
I will let you know if this was the case.
Thanks again...
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 22,457
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,457 |
Should be at the very bottom of the list *IF* the checkboxes are enabled for it in the audio preferences window.
Be forwarned, this consumes a lot of resources
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
rharv,
Still not able to find "input monitor" in that list anywhere.
First of all in options>preferences>audio..Audio driver type I have asio selected with the box for enable input monitoring ticked.
Also have the box on down just under quick volume change, marked as Realtime Effects Enabled also ticked.
I am using the M-audio asio driver. The input port selected reads "Analog in 1 Delta AP + Analog in 2 Delta AP. The output port selected reads "Analog out 1/2 L Delta AP + Analog out 1/2 R Delta AP. I also have the ASIO Always On box ticked.
Now when I go to my chosen track for recording vocal (track 41 in this case) and click on the little triangle arrow and then edit dx, the DirectX/VST window appears. I go to the very top window marked "Track" and use the pull down arrow to the right side of this top window and it shows all my tracks listed there. Now as I scroll down the list it shows the tracks down thru 48, then it shows >>Aux 1<< next down shows >>Aux 2<< then Output Insert 1 and so on down thru Output Insert 16. Next it lists "DXI Synth 1" down thru DXI Synth 15.
Then next listed is ">>VSC DXI (default)<<"
Then it lists AUX 3 down thru to the very last thing in that dropdown box which is AUX 8 and that's it! Nothing more.
Has got me bumfoozled. Unless I still am not looking in the right place for it!!
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
If you don't see the Input Monitoring at the very bottom of the Tracks dropdown in the DX effects window, something's wrong somewhere. Perhaps there is file corruption that a reinstall of the program would correct. Just checked using an archived copy of PTW11 and I can see it here after turning the global setting to True in the Audio Prefs. PT11 doesn't have the RightClick to set DX function as later versions do. Instead, you have to hit the DX toolbar button to get to the DX window where that dropdown is.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
Hi Mac!
OK, ya got me.
You said,"after turning the global setting to True in the Audio Prefs."
Do you mean the "Enable Input Monitoring" little check-mark box?
If so, I have done that.
Then you said, " PT11 doesn't have the RightClick to set DX function as later versions do. Instead, you have to hit the DX toolbar button to get to the DX window where that dropdown is."
So call me dense but I don't know what nor where the DX toolbar is let alone the DX toolbar button.
If it is the way I described above in my last post to rharv, then of course I have already done that as well. If it isn't, please elaborate further.
A question:
If I try a re-install of PT-11, will that effect any of my song files and/or data that I have saved so far up to this point? Have put in a lot of work to get this song to this point and sure would hate to lose it and have to start all over again.
And again thanks for your comments and all the help.
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Yes, "set to true" means a check in any checkbox. Checkboxes like that are "boolean" to programmers and engineers, which in this case simply means On or Off, True or False.
You could also select DX from the proper menu if you don't know how to use the Toolbars to add it. Will do the same thing.
You can safely reinstall PT or BB right overtop of themselves at any time and they will never overwrite your songs. I do it all the time here in testing new versions and whatnot, have never lost a single thing I've created in all these years. If here was a danger of losing any of your data, I would have warned you before telling you to try a reinstall. Wouldn't do that to anybody, mate.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 22,457
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,457 |
If you see the VSC DXi you may be trying to use a midi track or mono audio track instead of a stereo audio track (?)
Make sure the track is an audio track by right clicking and selecting 'audio - stereo' for the option to become available
just a thought
.. or you may indeed need to do a re-install
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
Hi rharv!
Yes, I have set the track for stereo audio but still no input monitor selection choice being shown at the bottom of that listing nor anywhere else within that dropdown. I had already done this from the beginning.
So, going to take Mac's advise and try a re-install of PTPA-11 this evening
after I get home from work.
I guess my alternatives are an outboard hardware effects & mixer combo of some sort or an upgrade to PTPA-12 maybe.
Thanks,
Will keep you posted.LOL
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
Hello again.
Well I just did the re-install of PT-11 and that did not do it.
That @#!*&%@ "Input Monitor" STILL is not there in the dropdown box.
Think I'll just take up knitting instead !!
It's gotta be easier than this !!
Anymore ideas ??
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
Hey Mac & rharv!!
Guess I'll close out this thread. I really feel pretty dumb at the moment.
Found the problem though!
It had never occured to me but I really didn"t know what build I had here of PT-11. And apparently the input monitor selection in the DX/VST window tracks dropdown box was not added till build 3 for PT-11. And guess what! I had build 2 all this time. So luckily I found that in the updates here on the web site they were still offering the build 4 update for PT-11.
So I downloaded & installed it, and lo and behold there it was and it works great just as advertised!
Just want to tell everyone and especially all the newbies like me to be sure and check for the latest updates for your PG software as it will definetly save you a lot of head-aches down the road.
Again a million thanks to Mac & rharv for their kind help, and to PG Music for this most valuable Forum.
Larry
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Watch the video.
You can see all the 2026 videos on our forum!
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Watch the video.
You can see all the 2026 videos on our forum!
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
- MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
- MIDI SuperTracks Set 46: Piano & Organ
- Instrumental Studies Set 24: Groovin' Blues Soloing
- Artist Performance Set 19: Songs with Vocals 9
- Playable RealTracks Set 5
- RealDrums Stems Set 9: Cool Brushes
- SynthMaster Sounds Set 1 (with audio demos)
- Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
- MIDI SuperTracks Set 47: More SynthMaster
- Instrumental Studies 25 - Soul Jazz Guitar Soloing
- Artist Performance Set 20: Songs with Vocals 10
- RealDrums Stems Set 10: Groovin' Sticks
- SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Learn more about the Bonus PAKs for Band-in-a-Box® 2026 for Windows®!
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics85,738
Posts795,587
Members39,945
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean