|
Log in to post
|
Print Thread |
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
Well Gang,
Back again! LOL
Have another issue with PTPA-11 that I can't seem to find the answer to.
I would also like to invoke input monitoring so I can put some realtime reverb on my vocal as I record and be able to hear the reverb AS I am recording it. However the actual recorded track would prefer it be dry.
I have read several posts on how to do this including the FAQ's as noted below:
Enable Input Monitoring (ASIO Only) – When this checkbox is enabled (and ASIO is selected in the Driver Type combo) then PowerTracks will take the ASIO input signal from input port number 1 and send it to output 1 so that you will hear the input through the speakers. You can apply realtime effects to the monitored input by selected “
Input” in the top combo box of the DirectX/VST Realime Effects dialog. You can then select up to 4 DirectX or VST effects.
WARNING! - Do not enable this feature if the input port number 1 is set to record the output (e.g. “What you hear” or “Mix” )because enabling input monitoring in this case will cause massive feedback that could hurt your ears!
Allow IM Effects Recording – When this is enabled, and Input Monitoring is enabled, and effects plugins are enabled for input monitoring (as described above), the effected signal will be recorded instead of the dry signal.
What I cannot find anywhere in PTPA-11 is the part about:
You can apply realtime effects to the monitored input by selected “
Input” in the top combo box of the DirectX/VST Realime Effects dialog. You can then select up to 4 DirectX or VST effects.
Where do I find the top combo box of the DirectX/VST Realime Effects dialog??
I have tried every window, every menu, every sub-menu, every drop-down box, every pop-up box that I can find in PT-11 and cannot find this "combo box" that is referred to.
What am I missing???
Thanks,
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 22,167
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,167 |
Beside the track number is a small triangle/arrow - click that, then edit DXFX
there will be four FX slots available and one slot at the very top that shows the track number; change this to "Input Monitor" (way at the bottom of the dropdown list)
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
Thanks rharv for the response.
Actually I have been there and done that, but the top dropdown box showed all of my tracks listed and some other stuff as I scrolled down thru all of them but nowhere did I find a selection choice called "input monitor"--even at the bottom.
But I will look at it again this evening after work, and double check that I just possibly missed it somehow.
I will let you know if this was the case.
Thanks again...
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 22,167
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,167 |
Should be at the very bottom of the list *IF* the checkboxes are enabled for it in the audio preferences window.
Be forwarned, this consumes a lot of resources
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
rharv,
Still not able to find "input monitor" in that list anywhere.
First of all in options>preferences>audio..Audio driver type I have asio selected with the box for enable input monitoring ticked.
Also have the box on down just under quick volume change, marked as Realtime Effects Enabled also ticked.
I am using the M-audio asio driver. The input port selected reads "Analog in 1 Delta AP + Analog in 2 Delta AP. The output port selected reads "Analog out 1/2 L Delta AP + Analog out 1/2 R Delta AP. I also have the ASIO Always On box ticked.
Now when I go to my chosen track for recording vocal (track 41 in this case) and click on the little triangle arrow and then edit dx, the DirectX/VST window appears. I go to the very top window marked "Track" and use the pull down arrow to the right side of this top window and it shows all my tracks listed there. Now as I scroll down the list it shows the tracks down thru 48, then it shows >>Aux 1<< next down shows >>Aux 2<< then Output Insert 1 and so on down thru Output Insert 16. Next it lists "DXI Synth 1" down thru DXI Synth 15.
Then next listed is ">>VSC DXI (default)<<"
Then it lists AUX 3 down thru to the very last thing in that dropdown box which is AUX 8 and that's it! Nothing more.
Has got me bumfoozled. Unless I still am not looking in the right place for it!!
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
If you don't see the Input Monitoring at the very bottom of the Tracks dropdown in the DX effects window, something's wrong somewhere. Perhaps there is file corruption that a reinstall of the program would correct. Just checked using an archived copy of PTW11 and I can see it here after turning the global setting to True in the Audio Prefs. PT11 doesn't have the RightClick to set DX function as later versions do. Instead, you have to hit the DX toolbar button to get to the DX window where that dropdown is.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
Hi Mac!
OK, ya got me.
You said,"after turning the global setting to True in the Audio Prefs."
Do you mean the "Enable Input Monitoring" little check-mark box?
If so, I have done that.
Then you said, " PT11 doesn't have the RightClick to set DX function as later versions do. Instead, you have to hit the DX toolbar button to get to the DX window where that dropdown is."
So call me dense but I don't know what nor where the DX toolbar is let alone the DX toolbar button.
If it is the way I described above in my last post to rharv, then of course I have already done that as well. If it isn't, please elaborate further.
A question:
If I try a re-install of PT-11, will that effect any of my song files and/or data that I have saved so far up to this point? Have put in a lot of work to get this song to this point and sure would hate to lose it and have to start all over again.
And again thanks for your comments and all the help.
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Yes, "set to true" means a check in any checkbox. Checkboxes like that are "boolean" to programmers and engineers, which in this case simply means On or Off, True or False.
You could also select DX from the proper menu if you don't know how to use the Toolbars to add it. Will do the same thing.
You can safely reinstall PT or BB right overtop of themselves at any time and they will never overwrite your songs. I do it all the time here in testing new versions and whatnot, have never lost a single thing I've created in all these years. If here was a danger of losing any of your data, I would have warned you before telling you to try a reinstall. Wouldn't do that to anybody, mate.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 22,167
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,167 |
If you see the VSC DXi you may be trying to use a midi track or mono audio track instead of a stereo audio track (?)
Make sure the track is an audio track by right clicking and selecting 'audio - stereo' for the option to become available
just a thought
.. or you may indeed need to do a re-install
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
Hi rharv!
Yes, I have set the track for stereo audio but still no input monitor selection choice being shown at the bottom of that listing nor anywhere else within that dropdown. I had already done this from the beginning.
So, going to take Mac's advise and try a re-install of PTPA-11 this evening
after I get home from work.
I guess my alternatives are an outboard hardware effects & mixer combo of some sort or an upgrade to PTPA-12 maybe.
Thanks,
Will keep you posted.LOL
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
Hello again.
Well I just did the re-install of PT-11 and that did not do it.
That @#!*&%@ "Input Monitor" STILL is not there in the dropdown box.
Think I'll just take up knitting instead !!
It's gotta be easier than this !!
Anymore ideas ??
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
Hey Mac & rharv!!
Guess I'll close out this thread. I really feel pretty dumb at the moment.
Found the problem though!
It had never occured to me but I really didn"t know what build I had here of PT-11. And apparently the input monitor selection in the DX/VST window tracks dropdown box was not added till build 3 for PT-11. And guess what! I had build 2 all this time. So luckily I found that in the updates here on the web site they were still offering the build 4 update for PT-11.
So I downloaded & installed it, and lo and behold there it was and it works great just as advertised!
Just want to tell everyone and especially all the newbies like me to be sure and check for the latest updates for your PG software as it will definetly save you a lot of head-aches down the road.
Again a million thanks to Mac & rharv for their kind help, and to PG Music for this most valuable Forum.
Larry
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support
Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.
Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support
Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins
Join the conversation on our forum.
Band-in-a-Box 2025 for Mac Videos
With the release of Band-in-a-Box® 2025 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll also keep this forum post updated so you can easily find all the latest videos in one convenient spot.
From overviews of new features and walkthroughs of the 202 new RealTracks, to highlights of XPro Styles PAK 8, Xtra Styles PAKs 18, the 2025 49-PAK, and in-depth tutorials — you’ll find everything you need to explore what’s new in Band-in-a-Box® 2025.
Reference this forum post for One-Stop Shopping of our Band-in-a-Box® 2025 Mac Videos — we’ll be adding more videos as they’re released!
Band-in-a-Box 2025 for Mac is Here!
Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!
Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.
2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.
If you have any questions, feel free to connect with us directly—we’re here to help!
Band-in-a-Box 2025 Italian Version is Here!
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box 2025 - Italiano
RealBand 2025 - Italiano
Band-in-a-Box 2025 French Version is Here!
Bonjour à tous,
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
BIAB 2025 - francisation
RealBand 2025 - francisation
Voilà, enjoy!
Band-in-a-Box 2025 German Version is Here!
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Stay up to date—get the latest update now!
|
|
|
|
|
|
|
|
|
|
|
|
Forums58
Topics84,317
Posts777,655
Members39,617
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean