|
Log in to post
|
Print Thread |
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Dec 2006
Posts: 587
Journeyman
|
OP
Journeyman
Joined: Dec 2006
Posts: 587 |
OK, so I have one track recorded from my synth in piano. I go to the next track to record something different and switch patches to a different instrument. My original track switches to the new patch. How can I make the first track stay with the patch I recorded it with?
THanks - lots 2 learn!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 22,223
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,223 |
Change the MIDI channel for the second track.
Either change the MIDI send channel on the synth before recording, or use 'Edit-rechannel' after the fact (making sure the whoe track is selected of course).
Synths respond to each of the sixteen MIDI channels separately. However if two tracks are set to the same MIDI channel, the synth will do what it is told; change the sound for that MIDI channel to whatever the latest command was. Even if the message came from different tracks. That is the difference between 'channels' and 'tracks'. You could, in theory, have the first part of a song play a sax on channel 4, then later have the trumpet use channel 4 (from a different track). This makes the 16 available channels flexible, but requires that you pay attention to the MIDI channels used.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Dec 2006
Posts: 587
Journeyman
|
|
OP
Journeyman
Joined: Dec 2006
Posts: 587 |
I right clicked on track 2 and there is a dialog box containing Channel: I switched that to channel 2 and closed. I noticed in the info area at the beginning of the track it said MIDI output - channel 2. I can't seem to find anywhere in the track where I can change the midi input.
I also tried selecting the whole track 2 and did edit/rechannel. It has choices of old low (which was set to 1) and old high (which was set to 16). Both low and high boxes in the new channel were set to one. Is this where I can make the changes you suggested?>
Thanks as always - Bernie
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 22,223
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,223 |
Yes, you should be able to just set the new high and low to cannel 2, leaving the old numbers at 1 and 16. Then everything on the highlited track should be forced to 2.
What happened after you tried the right-click option, did you play it and see if the patches were different now? That should have worked also, but I like hardwriting the stuff, like the edit option discussed.
Go ahead and try these types of things and see what happens; you can always undo, or just reopen the file as long as you haven't resaved it after messing something up.
Have fun
Last edited by rharv; 02/20/11 09:04 PM.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Dec 2006
Posts: 587
Journeyman
|
|
OP
Journeyman
Joined: Dec 2006
Posts: 587 |
No luck - no matter how I try to set different tracks to different channels, whatever patch I dial up on my synth/keyboad applies to all the midi tracks recorded (or live).
I double clicked on the header of the track, and selected "select entire track". The I went to Edit/Rechannel and put the new settings both to channel 2. (leaving the old low at 1 and the old high at 16). No luck. I am wondering if somehow the Juno keyboard/synth is overriding the PT software.
I did make some discoveries though. In order to record a guitar track on top of my midi keyboard tracks, I turn off the keyboard synth (which I am not sure I have to do), then plug my POD device in and use the POD drivers for both input and output.
Please help me fix this!! Thanks again as always - Bernie
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Dec 2006
Posts: 587
Journeyman
|
|
OP
Journeyman
Joined: Dec 2006
Posts: 587 |
No luck - no matter how I try to set different tracks to different channels, whatever patch I dial up on my synth/keyboard applies to all the midi tracks recorded (or live).
I double clicked on the header of the track, and selected "select entire track". The I went to Edit/Rechannel and put the new settings both to channel 2. (leaving the old low at 1 and the old high at 16). No luck. I am wondering if somehow the Juno keyboard/synth is overriding the PT software.
I did make some discoveries though. In order to record a guitar track on top of my midi keyboard tracks, I turn off the keyboard synth (which I am not sure I have to do), then plug my POD device in and use the POD drivers for both input and output.
Please help me fix this!! Thanks again as always - Bernie
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 22,223
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,223 |
Sounds like the synth itself is not in multitimpral mode
May need to be set to 'performance' mode or such..
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Dec 2006
Posts: 587
Journeyman
|
|
OP
Journeyman
Joined: Dec 2006
Posts: 587 |
Tried performance mode - actually was able to record a different instrument on a new track. However, I am limited to choices of patches in performance mode and cannot get the patch I want.
This cannot be this difficult! I have tried different combinations of drivers, no luck. I have contacted the forum where I got my Roland Juno syth from - the said I probably was in "Omni on" mode which is causing the issue, but I have no idea what that is.
Someone has got to be able to help! Different instruments from the synth on different tracks - how hard can it be??
HELPPPPP!!!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 22,223
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,223 |
Which Juno do you have? I have a couple here, maybe I can find something in the manual if its one I don't have.
Omni ON, Performance mode, there are a few things to check. Synth may be set to receive on just one channel ...
It is not hard once you know which button to push, but I'll need a model number.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Dec 2006
Posts: 587
Journeyman
|
|
OP
Journeyman
Joined: Dec 2006
Posts: 587 |
Roland Juno Di-60 - thanks - Bernie
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 22,223
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,223 |
I checked the Roland Site and I can't get to the manual; download fails at launch. It has to be something with multitimbral use or a mode it has to be set in. Trying sending the GM reset message. Maybe it needs to be changed to GM mode.
Can you find GM mode in the manual?
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Dec 2006
Posts: 587
Journeyman
|
|
OP
Journeyman
Joined: Dec 2006
Posts: 587 |
I found a way to change midi channels on my Juno keyboard thru menu/setup on the juno.
I change it to channel 2, change the track I want to reocrd on in PT to channel 2. Using Juno drivers, both in and out, on PT as midi drivers. Change patch on Juno - records fine.
Playback - Same midi drivers - Juno in, Juno out. During playback, I do not hear any other midi tracks - only the last track I recorded, and the audio gutiar track, which only plays out of the PC speaker. The midi track plays the correct patch.
Playback - change the midi out driver to MS midi mapper - all tracks play back on pc speaker including the newest one, but it reverts back to piano (which is what the other midi tracks are).
Now what?
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 22,223
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,223 |
Your synth is still not set up to be in multitimbral mode. See if you can set it to GM mode or something similar, maybe performance mode ... not sure what they'll call it on that model. On my recent Juno-G its performance mode if I want to assign patches. Or it can also run in GM mode if I just want standard GM soundset.
I couldn't get to your model's manual online a few days ago, I'll try again later today.
In you manual should be instructions on how to set it up to play multiple sounds from MIDI.
It appears to still be playing one sound at a time.
Either that or you are not assigning patches to the tracks.
Did you right-click the track and select a patch for it? Did you right click the track and select channel 2 for MIDI?
What is the patch number you want for channel 2?
Channel 1 is piano, so go to event list for the track on channel 1 and 'insert' a program change on MIDI chammel 1 at the beginning of the song to program 1 (basic piano). This is called hard writing the change.
Then go to the track with channel 2 on it, go to event list and 'insert' a program change on MIDI channel 2 for program 33, and see if you get two sounds from the synth when you play it then. This should force the patch changes.
If not it is not in multitimbral mode.
Last edited by rharv; 03/05/11 12:15 PM.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Dec 2006
Posts: 587
Journeyman
|
|
OP
Journeyman
Joined: Dec 2006
Posts: 587 |
I did as you said and it worked fine. I did get 2 different instruments. I understand now what you mean by "hard writing" a track. It appears that it locks in that instrument based on the first event.
However, I choose my patches for tracks from the Juno synthesizer, rather than the limited patches in the program change in PT. The patch I want to use from the Juno is 92 (bells)
I do have a "performance mode" button. As I stated earlier, I cannot choose the patch I want to use. There is a limited selection in performance mode.
I'll keep working at it.
Thanks again for the continued assistance.
Bernie
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 22,223
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,223 |
Make the program change 92, forget about what the GM list says that program name is, the number is what counts. If you send a message to the Juno to change to 92, it will change to 92, not caring about the patch name. However, if that sound is in a different bank, then you'll be learning about how to change banks next.  Here's something you can try if you feel up to it. Go here - http://www.pgmusic.com/support_miscellaneous.htmdownload the patchmap for the Juno-D Rename your file in the PT folder from "patches.ini" to "patches.old" Then name the new downloaded patch map to "patches.ini" PT should rebuild the patch map next time you start PT and give you a message about rebuilding the patches.bin file. and you can see if the new patch list is closer to what you have in the D i. It may be close and just need a few names changed, or it may be way off still. But it'll show you that you can access many more than the 128 numbers in your current GM list. If a problem occurs, close PT and rename the files back to what they were. If anything real bad happens, the originial file is available.
Last edited by rharv; 03/05/11 03:11 PM.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Dec 2006
Posts: 587
Journeyman
|
|
OP
Journeyman
Joined: Dec 2006
Posts: 587 |
If I understand correctly then patch lists are pretty much universal - what is in PT should be close to what is in my synth, correct?
I did what you intructed above. It must have rebuilt in a flash because when I opened PT I saw a quick flash but could not read it.
It appears that I should choose my patches in PT rather than on the synth, correct? If I do, it should record in the patch number assuming I have it on a separate track and midi channel than the other tracks.
I noticed when I opened the patch file in PT I had other choices - general midi, ROLAND GS,and others. Is there any meaning to this?
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
I can't get the manual either however I owned a Roland JV880 which is fairly old so may be similar. Most Roland stuff is.The JV was an 8 part multitimberal unit. What this meant was that in performance mode there were 8 different parts that could be played. You could also save a performance setup into memory. When you called up this performance all 8 instruments were pre defined for you. I think this is were you are getting confused about the limited number of instruments available in performance.Call up a blank performance or edit an existing one.Set each of the parts one at a time to receive on different midi channels. Say 1 through 8 with drums on 10.Now when you record from your keyboard it's midi out channel is probably set to channel 1 so thus the track you record will play back on channel 1.After you're done recording you need to reset the recorded track to one of the 8 receive channels & set a patch in PT on that track.If you don't all the tracks will be sending on the channel that was used to record.If your unit is 8 part like mine you'll be limited to 6 tracks.When done you should have 8 tracks in Power Tracks that have midi channels 1 through 8 assigned for out with 8 different patches.This data will cause the 8 different parts to play those tracks with the correct patch.
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 22,223
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,223 |
Recent Junos recognize more than 8 MIDI channels; you can use all 16.
No the patch map is not universal (unless in GM mode, see below), the numbering system is though. If you want patch #86 then send program change #86 on the correct MIDI channel and the synth will play it. The name doesn't matter - it's the number that matters. That's why I like to hard write the program changes as described above.
If you are using the GM soundset, then the answer would be yes. The numbers and names are designed to match in GM mode. That is the beauty of GM or GS modes; they are universal.
But for your aynth in performance mode you should be able to use any sound availble on the synth, not just the GM soundset. Gm is a certain set of sounds, and your synth has many more sounds to offer.
Last edited by rharv; 03/05/11 04:27 PM.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Dec 2006
Posts: 587
Journeyman
|
|
OP
Journeyman
Joined: Dec 2006
Posts: 587 |
So say I want piano on one track and bass on another.
1. set Juno to piano and record on track 1, channel 1 in PT
2. Go into PT and set the patch to piano
3. Select track 2
3. Go into performance mode on the Juino and edit/new patch to bass (whatever number that is) setting to modo channel 2
4. In performance mode, play bass and record on track 2, channel 2.
5. Go into PT and change patch on channel 2 to bass
Is this correct?
Thanks
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Quote:
So say I want piano on one track and bass on another.
1. set Juno to piano and record on track 1, channel 1 in PT
2. Go into PT and set the patch to piano
3. Select track 2
3. Go into performance mode on the Juino and edit/new patch to bass (whatever number that is) setting to modo channel 2
4. In performance mode, play bass and record on track 2, channel 2.
5. Go into PT and change patch on channel 2 to bass
Is this correct?
Thanks
I think you have it grasped somewhat.Make sure that the receive channel on the Juno for each part has been set to the appropriate channel of the track.Make sure after the track has been recorded that the channel number matches, EXample. If in the juno part one is set to channel 2 and you record the bass track make sure that in Power Tracks that that bass track is also set to output on channel 2 and that you have assigned a bass patch as well.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
XPro and Xtra Styles PAKs Special Extended Until August 31st!
XPro & Xtra Styles PAKs Special Extended Until August 31st!
The XPro Styles PAKs and Xtra Styles PAKs special offers are now available until August 31st at 11:59pm PDT!
Ready to take your Band-in-a-Box® 2025 experience to the next level? Now’s the perfect time! Expand your style library with XPro and Xtra Styles PAKs—packed with a wide variety of genres to inspire your next musical creation.
What are XPro Styles and Xtra Styles PAKs?
XPro Styles PAKs are styles that work with any version (Pro, MegaPAK, UltraPAK, UltraPAK+, or Audiophile Edition) of Band-in-a-Box® 2025 (or higher). XPro Styles PAKS 1-9 includes 900 styles!
Xtra Styles PAKs are styles that work with the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box® 2025 (or higher). With over 3,500 styles (and 35 MIDI styles) included in Xtra Styles PAKs 1-20, the possibilities are endless!
Get the XPro Styles PAKs 1 - 9 for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Listen to demos and order now! For Windows or for Mac.
Note: XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
Get Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 19 PAKs for $199 (reg $399)! Listen to demos and order now! For Windows or for Mac.
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 19 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
Don’t miss this chance to supercharge your Band-in-a-Box setup—at a great price!
Mac 2025 Special Upgrade Offers Extended Until August 15th!
It's not too late to upgrade to Band-in-a-Box® 2025 for Mac® and save! We've extended our special until August 15, 2025!
We've added many major new features to Band-in-a-Box® 2025 for Mac®, including advanced AI tools like the amazing BB Stem Splitter and AI Lyrics Generator, as well as VST3 plugin support, and Equalize Temp. Plus, there’s a new one-stop MIDI Patches Picker with over 1,100 MIDI patches to choose from, all neatly categorized by GM numbers. The MultiPicker Library is enhanced with tabs for the SongPicker, MIDI Patch Picker, Chord Builder, AI Lyrics Generator, and Song Titles Browser, and the tabs are organized into logical groups. The Audiophile Edition is enhanced with FLAC files , which are 60% smaller than AIFF files while maintaining identical audio quality, and now ships on a fast 1TB SSD, and much more!
Check out all the new features in Band-in-a-Box® 2025 for Mac® here:
Purchase your Band-in-a-Box® 2025 for Mac during our special to save up to 50% off your upgrade purchase and receive a FREE BONUS PAK of amazing new Add-ons. These include the 2025 RealCombos Booster PAK, Look Ma! More MIDI 13: Country & Americana, Instrumental Studies Set 22: 2-Hand Piano Soloing - Rhythm Changes, MIDI SuperTracks Set 44: Jazz Piano, Artist Performance Set 17: Songs with Vocals 7, Playable RealTracks Set 4, RealDrums Stems Set 7: Jazz with Mike Clark, and more!
Upgrade to the 2025 49-PAK for just $49 and add 20 Bonus Unreleased RealTracks and 20 RealStyles, FLAC Files for the 20 Bonus Unreleased RealTracks, Look Ma! More MIDI 14: SynthMaster, MIDI SuperTracks Set 45: More SynthMaster, Artist Performance Set 18: Songs with Vocals 8, and RealDrums Stems Set 8: Pop, Funk & More with Jerry Roe.
Learn more about the Bonus PAKs!
New RealTracks Released with Band-in-a-Box 2025!
We’ve expanded the Band-in-a-Box® RealTracks library with 202 incredible new RealTracks (in sets 449-467) across Jazz, Blues, Funk, World, Pop, Rock, Country, Americana, and Praise & Worship—featuring your most requested styles!
Jazz, Blues & World (Sets 449–455):
These RealTracks includes “Soul Jazz” with Neil Swainson (bass), Mike Clark (drums), Charles Treadway (organ), Miles Black (piano), and Brent Mason (guitar). Enjoy “Requested ’60s” jazz, classic acoustic blues with Colin Linden, and more of our popular 2-handed piano soloing. Plus, a RealTracks first—Tango with bandoneon, recorded in Argentina!
Rock & Pop (Sets 456–461):
This collection includes Disco, slap bass ‘70s/‘80s pop, modern and ‘80s metal with Andy Wood, and a unique “Songwriter Potpourri” featuring Chinese folk instruments, piano, banjo, and more. You’ll also find a muted electric guitar style (a RealTracks first!) and “Producer Layered Guitar” styles for slick "produced" sound.
Country, Americana & Praise (Sets 462–467):
We’ve added new RealTracks across bro country, Americana, praise & worship, vintage country, and songwriter piano. Highlights include Brent Mason (electric guitar), Eddie Bayers (drums), Doug Jernigan (pedal steel), John Jarvis (piano), Glen Duncan (banjo, mandolin & fiddle), Mike Harrison (electric bass) and more—offering everything from modern sounds to heartfelt Americana styles
Check out all the 202 New RealTracks (in sets 456-467)
And, if you are looking for more, the 2025 49-PAK (for $49) includes an additional 20 RealTracks with exciting new sounds and genre-spanning styles. Enjoy RealTracks firsts like Chinese instruments (guzheng & dizi), the bandoneon in an authentic Argentine tango trio, and the classic “tic-tac” baritone guitar for vintage country.
You’ll also get slick ’80s metal guitar from Andy Wood, modern metal with guitarist Nico Santora, bass player Nick Schendzielos, and drummer Aaron Stechauner, more praise & worship, indie-folk, modern/bro country with Brent Mason, and “Songwriter Americana” with Johnny Hiland.
Plus, enjoy user-requested styles like Soul Jazz RealDrums, fast Celtic Strathspey guitar, and Chill Hop piano & drums!
The 2025 49-PAK is loaded with other great new add-ons as well. Learn more about the 2025 49-PAK!
Bonus PAKs for Band-in-a-Box 2025 for Mac!
With your version 2025 for Mac Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons FREE! Or upgrade to the 2025 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2025 RealCombos Booster PAK:
-For Pro customers, this includes 33 new RealTracks and 65+ new RealStyles.
-For MegaPAK customers, this includes 29 new RealTracks and 45+ new RealStyles.
-For UltraPAK customers, this includes 20 new RealStyles.
- Look Ma! More MIDI 13: Country & Americana
- Instrumental Studies Set 22: 2-Hand Piano Soloing - Rhythm Changes
- MIDI SuperTracks Set 44: Jazz Piano
- Artist Performance Set 17: Songs with Vocals 7
- Playable RealTracks Set 4
- RealDrums Stems Set 7: Jazz with Mike Clark
- SynthMaster Sounds and Styles (with audio demos)
- 128 GM MIDI Patch Audio Demos.
Looking for more great add-ons, then upgrade to the 2025 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyles,
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- Look Ma! More MIDI 14: SynthMaster,
- Instrumental Studies Set 23: More '80s Hard Rock Soloing,
- MIDI SuperTracks Set 45: More SynthMaster
- Artist Performance Set 18: Songs with Vocals 8
- RealDrums Stems Set 8: Pop, Funk & More with Jerry Roe
Learn more about the Bonus PAKs for Band-in-a-Box® 2025 for Mac®!
New! Xtra Styles PAK 20 for Band-in-a-Box 2025 and Higher for Mac!
Xtra Styles PAK 20 for Mac & Windows Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!
We're excited to bring you our latest and greatest in the all new Xtra Styles PAK 20 for Band-in-a-Box! This fresh installment is packed with 200 all-new styles spanning the rock & pop, jazz, and country genres you've come to expect, as well as the exciting inclusion of electronic styles!
In this PAK you’ll discover: Minimalist Modern Funk, New Wave Synth Pop, Hard Bop Latin Groove, Gospel Country Shuffle, Cinematic Synthwave, '60s Motown, Funky Lo-Fi Bossa, Heavy 1980s Metal, Soft Muted 12-8 Folk, J-Pop Jazz Fusion, and many more!
All the Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 209 PAKs for $199 (reg $399)! Order now!
Learn more and listen to demos of the Xtra Styles PAK 20.
Video: Xtra Styles PAK 20 Overview & Styles Demos: Watch now!
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 20 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
New! XPro Styles PAK 9 for Band-in-a-Box 2025 and higher for Mac!
We've just released XPro Styles PAK 9 for Mac & Windows Band-in-a-Box version 2025 (and higher) with 100 brand new RealStyles, plus 29 RealTracks/RealDrums!
We've been hard at it to bring you the latest and greatest in this 9th installment of our popular XPro Styles PAK series! Included are 75 styles spanning the rock & pop, jazz, and country genres (25 styles each) that fans have come to expect, as well as 25 styles in this volume's wildcard genre: funk & R&B!
If you're itching to get a sneak peek at what's included in XPro Styles PAK 9, here is a small helping of what you can look forward to: Funky R&B Horns, Upbeat Celtic Rock, Jazz Fusion Salsa, Gentle Indie Folk, Cool '60s Soul, Funky '70s R&B, Smooth Jazz Hip Hop, Acoustic Rockabilly Swing, Funky Reggae Dub, Dreamy Retro Latin Jazz, Retro Soul-Rock Fusion, and much more!
Special Pricing! Until July 31, 2024, all the XPro Styles PAKs 1 - 9 are on sale for only $29 ea (Reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Order now!
Learn more and listen to demos of XPro Styles PAKs.
Video: XPro Styles PAK 9 Overview & Styles Demos: Watch now!
XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
New! Xtra Styles PAK 20 for Band-in-a-Box 2025 and Higher for Windows!
Xtra Styles PAK 20 for Windows & Mac Band-in-a-Box version 2025 (and higher) is here with 200 brand new RealStyles!
We're excited to bring you our latest and greatest in the all new Xtra Styles PAK 20 for Band-in-a-Box! This fresh installment is packed with 200 all-new styles spanning the rock & pop, jazz, and country genres you've come to expect, as well as the exciting inclusion of electronic styles!
In this PAK you’ll discover: Minimalist Modern Funk, New Wave Synth Pop, Hard Bop Latin Groove, Gospel Country Shuffle, Cinematic Synthwave, '60s Motown, Funky Lo-Fi Bossa, Heavy 1980s Metal, Soft Muted 12-8 Folk, J-Pop Jazz Fusion, and many more!
All the Xtra Styles PAKs 1 - 20 are on special for only $29 each (reg $49), or get all 209 PAKs for $199 (reg $399)! Order now!
Learn more and listen to demos of the Xtra Styles PAK 20.
Video: Xtra Styles PAK 20 Overview & Styles Demos: Watch now!
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 20 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
|
|
|
|
|
|
|
|
|
|
|
|
Forums58
Topics84,630
Posts782,033
Members39,709
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
|
|
|
There are no members with birthdays on this day. |
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean