|
Log in to post
|
Print Thread |
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2002
Posts: 88
Enthusiast
|
Enthusiast
Joined: Jun 2002
Posts: 88 |
At this point I'm suspecting everything, especially that 1 usb port. I have a lot of hubs working off of it and I'm sure that's some of the problem too...sigh. Although, everything does work, kinda sorta, there's that 1 issue. O well, at least it's not inhibiting me from doing things. I'm at that phase in life (CRS) and that could be some of the issue as well.  O well, thanks for the input, Wrkinit
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Your problem is most likely the USB port on the older computer. It may be malfunctioning, or it might jsut be that the computer was built at a time when the USB implementation wasn't up to what it is capable of today, which is highly likely.
The Sonic Cell may require USB 1.1 at the least and very likely that would be marginal bandwidth for the device, with USB 2.0 likely being the preferred.
**You might find a BIOS flash and newer USB drivers for the computer on the mfrs website, may or may not provide functionality here.**
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2002
Posts: 88
Enthusiast
|
|
Enthusiast
Joined: Jun 2002
Posts: 88 |
Thanks for the heads up Mac. The more I think about it, you’re probably right. I’ve been having issues of late with that usb port. I’ll look into the bios and the newer 2.0 usb drivers. When I tried to have the 256mb memory increased I was told that the mother board was dated and the memory couldn’t be upgraded There lies' some of the other issues with it being so old. At least it does work, but I know it could perform a lot better. Thanks again for all the support.
Wrkinit (I'm still hopeful)
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Hope is not gonna work here.
If the laptop cannot accept more than 256megs of ram, that is the end of the road, you'd be far better off looking for a newer used laptop or the likes, one that can do the kind of job demanded here.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2002
Posts: 88
Enthusiast
|
|
Enthusiast
Joined: Jun 2002
Posts: 88 |
I hear you Mac, but I do have another one (with larger memory) that does work. Both of these
laptops are older, but do what I need, for the most part. They have built in 3.5 floppy drives
and CD/DVD burners also usb capability. They don't make them like that anymore...so...I did as
you suggested and downloaded everything I could to update that Compaq, but to no avail. It's
not a big deal breaker, but it would've been nice to have that one work off the usb cable, on
the SC, as well.
Still,
Wrkinit
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2005
Posts: 7,697
Veteran
|
|
Veteran
Joined: Jun 2005
Posts: 7,697 |
256Mb of ram? That laptop must be 10 years old. I have a friend who still uses Biab 2007 or something like that. He had an old Pentium III with 256 of ram. It would barely handle midi only using the Roland VSC. His was upgradable to 512 and he found a ram stick for $10 and that helped. A year later I gave him my old P4 with 2 gigs ram and everything is perfect. You really need something newer.
Bob
Biab/RB latest build, Win 11 Pro, Ryzen 5 5600 G, 512 Gig SSD, 16 Gigs Ram, Steinberg UR22 MkII, Roland Sonic Cell, Kurzweil PC3, Hammond SK1, Korg PA3XPro, Garritan JABB, Hypercanvas, Sampletank 3, more.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2002
Posts: 88
Enthusiast
|
|
Enthusiast
Joined: Jun 2002
Posts: 88 |
Well, as I stated in my last post, I do have another laptop that works. It's the older 1 that's
at least 20 + something that's the issue. And I also use BIAB 2007.5 and 2009.5 which works just
fine for me. There is a Yahoo BIAB forum that discussed "New and Improved" BIAB midi updates.
Which basically addressed the abandonment of the midi portion of the program or the lack there
of. Anyway, I've suspected all along that the older of my 2 laptops was just too antiquated to
run the SC the way I wanted. I thought a while back I was able to use the usb cable with it,
but maybe I was wrong. It does work using midi cables and the lap does recognize that the cable
is connected, but that's about it, so it's not really a big thing.
Thanks for responding, just the same.
Wrkinit
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2005
Posts: 7,697
Veteran
|
|
Veteran
Joined: Jun 2005
Posts: 7,697 |
I missed your last post but floppy drives? Everything I said still stands. If you can make that "newer" one work great but man, it's time to retire that thing. They don't make them like that any more? They sure don't, nothing modern would work on it if they did. The thing is, I'm probably the only one here who actually engages someone with an antique computer and tells them they really need to upgrade. This isn't the first time and guess what, everybody else has upgraded. The other posters in this thread probably to their credit  just stay polite and make a few suggestions. Me, I tell it like it is. You're wasting your time believe me trying to chase incompatibility issues with a laptop that old. If it's not this issue today, it'll be something else tomorrow until you finally trash it and and get something that's less than 5 years old. Bob
Biab/RB latest build, Win 11 Pro, Ryzen 5 5600 G, 512 Gig SSD, 16 Gigs Ram, Steinberg UR22 MkII, Roland Sonic Cell, Kurzweil PC3, Hammond SK1, Korg PA3XPro, Garritan JABB, Hypercanvas, Sampletank 3, more.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2002
Posts: 88
Enthusiast
|
|
Enthusiast
Joined: Jun 2002
Posts: 88 |
Here's the thing, Bob since you aren't following the entire thread. The old laptop works just fine, except for that one *small* issue of not being able to select the SC as a device. However, as I stated before, the *older* laptop (was inexpensive and is dedicated more for music) sees the connection and works using my midi connection and not the usb cable. This is a minor thing and I am well aware that a brand new computer, more than likely, would be less of a hassle in that regard, maybe? My other laptop, also an older model, has a faster cpu, more memory and the same built in devices (floppy and CD/DVD burner), works and sees the SC as it should. So to suggest I trash the problem child for a newer model, because it's old, reminds me of the saying, "If it ain't broke..." I am not of the "rich" school of buying the newest thing on the market (technology wise) to be ahead of or keeping up with the pack. I don't have it like that and I'm really not interested in pleasing others because it's the "in" thing to do.
Often times, the new and improved has it's own set of issues, OS, drivers, software compatibility and the like. So don't get me wrong, I do appreciate the feedback on this, but your mode of thought is, well let's just say, not how I would roll. When I posted my dilemma, I *thought* there was something I was missing, because I had believed at one time, it did work.
FWIW,
Wrkinit
Last edited by Wrkit; 05/05/12 07:10 AM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Sep 2009
Posts: 67
Enthusiast
|
|
Enthusiast
Joined: Sep 2009
Posts: 67 |
Yep, if you're using biab with an external sound-module and no realtracks or vsti, your old computer "should" work. Midi is very light on cpu.
Free tools for Biab: Biab Scales and BIArpeggio to practice scales/arpeggio Biab Explorer: the other song picker
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Sometimes using a Powered USB Hub can work on older machines where the USB connection does not seem to be able to work with certain devices.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2002
Posts: 88
Enthusiast
|
|
Enthusiast
Joined: Jun 2002
Posts: 88 |
I am using a powered usb and that has helped, somewhat. Old is what it is...sigh!
Wrkint
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2002
Posts: 88
Enthusiast
|
|
Enthusiast
Joined: Jun 2002
Posts: 88 |
It's always been problematic (2nd hand purchase for under $100.00), but since there is only 1 port on this older machine and I'm not sure if the upgrade I did from 1.1 to 2.0 worked or helped? I use 2 hubs (1 is powered and the other is not) that run most of the other (8) usb connections I have.
Removing everything and just connecting the SC to the usb port by itself didn't seem to make it work either. The laptop knows when it is connected and when it's not, but that's it, so the usb port and cable do work. How well it does work is another matter, in terms of it being capable of running newer and more demanding technology, that's the gist.
However, the SC does work using the *usb* cable and port, on my other laptop, so it's not a really pressing matter. I was just curious as to whether or not it could/did on the older of the 2 laps.
Wrkinit
Last edited by Wrkit; 05/07/12 07:16 AM.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
Band-in-a-Box® 2026 for Windows® users: Build 1237 is now available!
Already a Band-in-a-Box 2026 for Windows user? Stay up to date and download the build 1237 to get all the latest additions and enhancements.
PowerTracks Pro 2026 for Windows is Here!
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Order now!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics86,050
Posts799,407
Members40,019
| |
Most Online44,367
Mar 4th, 2026
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean