Previous Thread
Index
Next Thread
Print Thread
Go To
#116104 06/04/11 06:17 PM
Off-Topic
Joined: Jan 2008
Posts: 37
J
Jally Offline OP
Enthusiast
OP Offline
Enthusiast
J
Joined: Jan 2008
Posts: 37
Hello;

I’ve been recording my trumpet using a Shure 58 into an UA-1G into PowerTracks. I am new to this. I’ve read that 57's and 58's are great for gigs but not great as recording mics.

As a result, I don’t know if I should be buying another mic (your recommendations would be appreciated) to improve the sound quality of my recordings. I don’t know if I would need to replace the UA-1G as well.

I understand that there are a lot of things that can be done during the mixing stage that can improve the sound of a performance but I’m not there yet.

I am wondering if you would be willing to listen to a sound bite and let me know if I am on the right track with the sound that I am getting. Trumpet is live. The rest is real tracks.

I would appreciate any advice.

http://www.twobucksdanceband.com/thats_all_snippet.mp3

Thanks

Jally #116105 06/04/11 06:25 PM
Off-Topic
Joined: May 2000
Posts: 22,558
Veteran
Offline
Veteran
Joined: May 2000
Posts: 22,558
SM 57 and SM 58 have been on a ton of hit records in featured spots, including horns.

I think you're doing fine so far. Nice tone.


I do not work here, but the benefits are still awesome
Make your sound your own!
Jally #116106 06/04/11 06:30 PM
Off-Topic
Joined: Dec 2002
Posts: 12,911
Veteran
Offline
Veteran
Joined: Dec 2002
Posts: 12,911
The Shure mics shound great with your horn.

DrDan #116107 06/04/11 07:06 PM
Off-Topic
Joined: Jul 2000
Posts: 27,518
Veteran
Offline
Veteran
Joined: Jul 2000
Posts: 27,518
Warm tone and good intonation. Nice sound.

To improve on this, you would probably have to spend $600 to $1,100 on a ribbon mic, and most of those require a more expensive preamp that has more gain than usual.

The 57 and 58 have the same element; the ball on the 58 gives it a slightly different response that horn players and vocalists like.

I think you're doing fine.


BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
Off-Topic
Joined: Mar 2004
Posts: 6,722
Veteran
Offline
Veteran
Joined: Mar 2004
Posts: 6,722
Sounds great . . . I would not change a thang!

Welcome aboard!

Jally #116109 06/05/11 09:05 AM
Off-Topic
Joined: May 2000
Posts: 38,502
M
Mac Offline
Veteran
Offline
Veteran
M
Joined: May 2000
Posts: 38,502
You would be hard pressed to improve on the sound your are already getting by replacing the mic.

The Shure '57 or '58 as you have is an *excellent* choice for recording the Trumpet.

Problems arise when Internet newcomers to the art and science of recording begin to pontificate about stuff like this. Most start recommending large diaphragm condenser mics and phantom power, etc. etc.

But the Trumpet has such a high dynamic range ability that it is exceptionally easy for we TruMpet players to overdrive such a microphone as the large diaphragm condenser, plus they are typically too sensitive and pick up more of the room, sometning that is typically not that desirable in home recording environments.

Hell, I can *destroy* a large diaphragm with my horn if I have a mind to do so, and likely so can you from the sound of your embouchure, etc. And don't even *think* of what either of us could do to a Ribbon Mic... - There'd be little pieces of tinfoil confetti floatin' around the studio when we got done *grin*. A Trumpet in the right hands can generate up to 7 Watts of RMS Audio Power at the bell. Stupid kids have actually managed to permanently damage other kids hearing with trumpets in school bands, never a funny trick to blow a trumpet or trombone into someone else's ear. Or into their expensive and sensitive ribbon or condenser mic, either. We play the instrument of the battlefield, man.

The Cardioid Dynamic Mic is still my mic of choice for Trumpet (and Trombone) sections.

I have quite often specified those Shure mics for pro recording sessions of both sections and soloists.

In my opinion, the only step up from your Shure that would really mean something also has that pesky "Law of Diminishing Returns" riding along with it, meaning that the amount of money spent that is over and above the cost of the Shure is far more than the amount of improvement gained in sound quality.

And if you must know, that mic is still Cardioid Electrodynamic design, same as your Shure, it is the infamous Electro Voice RE-20. Great trumpet mic when used in a great acoustic environment with an even greater mic preamp.

But you really don't NEED to spend that kind of money on a new mic for your intended purpose, what you've presented here sounds very good indeed to this old recording engineer and trumpet player's ears, man.

"If it works, don't FIX it."

One thing I've learned to do over the years is to *NEVER* discuss the technical aspects of my recordings when presenting them. I just put 'em out there and sit back and watch the listeners. And remain mum.

That is because I have found out empirically that if I go ahead and volunteer any technical info at all, it invites the kind of situation which prompted your question.

So I never maention anything at all before or after the presentation of the recording.

If asked a specific wuestion such as "what mic did you use for the ________?" -- I have learned to respond with a question: "Well, what Mic do you *think* I used?"

As Duke Ellington once pointed out, "If it sounds good, it IS good!"

And your recordeing sounds GOOD, man.


--MAC

Mac #116110 06/06/11 06:44 PM
Off-Topic
Joined: Jan 2008
Posts: 37
J
Jally Offline OP
Enthusiast
OP Offline
Enthusiast
J
Joined: Jan 2008
Posts: 37
Thanks for the input everyone. I appreciate the kinds words coming from other musicians. I'll keep trying.

Jally #116111 06/06/11 07:24 PM
Off-Topic
Joined: Jul 2000
Posts: 27,518
Veteran
Offline
Veteran
Joined: Jul 2000
Posts: 27,518
It sounded good. And, disregard what I said about ribbon mics. I'm going to tell all the studios that have used them on me that they were wrong.


BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
Off-Topic
Joined: Dec 2000
Posts: 12,840
Veteran
Offline
Veteran
Joined: Dec 2000
Posts: 12,840
I surely didn't hear anything wrong with that recording. Sounds great...post some more!


John

Laptop-HP Omen I7 Win11Pro 32GB 12TB SSD
Desktop-ASUS-I7 Win10Pro 32GB 12TB SATA

BB2026/UMC204HD&404HD/Casios/Cakewalk/Reaper/Studio One/Notion/Dorico/Noteworthy/NI/Halion/IK

http://www.sus4chord.com (under rehosting/construction)
Jally #116113 06/07/11 04:04 AM
Off-Topic
Joined: Dec 2002
Posts: 491
Journeyman
Offline
Journeyman
Joined: Dec 2002
Posts: 491
Jally, Just adding my comments......same as the others.....lovely warm sound! As Mac says.."Don't change!" I've recorded Trumpeters several times in my little home studio ......with studio condenser mics AND SM58s........the horn guys always liked the SM58 sound better! You have horn players here, who really know their stuff....if they say .....it's a good sound...then it is! Regards, Joe G.

Off-Topic
Joined: May 2000
Posts: 38,502
M
Mac Offline
Veteran
Offline
Veteran
M
Joined: May 2000
Posts: 38,502
Quote:

It sounded good. And, disregard what I said about ribbon mics. I'm going to tell all the studios that have used them on me that they were wrong.




Hey Matt,

I didn't say that you could not use a ribbon mic on a Trumpet.

What I said was that a Trumpet can indeed generate enough Sound Pressure Level to SHRED one, or at least risk damaging the ribbon.

But this also must depend upon the particular player and more importantly, the STYLE of their playing at the time of recording. A lot of Latin style Trumpet, and especially Flugelhorn, isn't likely to be the same kind of playing that a Section might have to belt in a bigband or the likes.

But you know that.

The advice was given to someone recording at home with their own limited amount of equipment available and regards the purchase of - or not - a new microphone, one microphone. At that point, we shouldn't be looking at specialty tool as much as a tool that is *easy to get good results, *doesn't pick up much of the room, which is very likely not going to be studio acoustics, *covers a wide dynamic range such that any type of music style could be conceiveably recorded with the least amount of technical setup and provision to the user, that sort of thing was where I was headed.

At a well-equipped studio, if charged with the Tracking Engineering, I might go to the well-equipped mic cabinet and select a Ribbon mic for you as well, after auditioning what was to be recorded. Or maybe not. A lot depends upon other factors as well, such as what type of mic each particular engineer favors, what type of preamp they intend to use, sometimes it grinds down to what they feel most comfortable with using.

Bear in mind that in the studio there is typically another person involved at least, that
Tracking Engineer can manually "ride the gain" if need be to prevent overdriving inputs or other possible means of distortions that can occur while the recording is being done. A person playing by themseles in the home studio is likely better off concentrating on the playing and using a mic/preamp combination that is pretty much "set and forget" in order to git-r-done.


--Mac

Off-Topic
Joined: Jan 2002
Posts: 7,913
R
Veteran
Offline
Veteran
R
Joined: Jan 2002
Posts: 7,913
Jally, that recording and mix that you posted sounds better than a good 99% of what shows up on home recorded forums that I haunt.

I would say that with the ribbon mic that I have; a Cascade Fat Head - one of the less expensive ribbons on the market - you would run into the issue that Matt Finley describes - you likely wouldn't have enough gain in the UA-1G to get a nice clean signal.

It has been a somewhat disappointing mic in that regard. So you would be looking at a system solution that not only includes a ribbon mic of lower noise floor, but also a pre-amp and for that matter, likely spending some major coin on treating your recording space.

What you are doing now is working VERY well, and you have a good ear for mixing.

Record away. Sell some music (if that's your goal).

-Scott

Off-Topic
Joined: Jul 2000
Posts: 27,518
Veteran
Offline
Veteran
Joined: Jul 2000
Posts: 27,518
Mac, thanks for the clarification. My ribbon mic at home is pretty much 'set and forget' so it can be done. I worked up to the optimum input level very slowly and carefully, and adjust only the preamp output for specific instruments. In the studios, they regularly bring out an old 1950s RCA ribbon mic for me, and we love it.

Scott, good call. That Fat Head mic is well-known on the trumpet forums as the least expensive ribbon mic to get a 'warm' sound. Next up in price is a Beyerdynamic at around $700, then the two Royers at over $1100. All require lots of gain in the preamp.


BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
Off-Topic
Joined: Jan 2008
Posts: 37
J
Jally Offline OP
Enthusiast
OP Offline
Enthusiast
J
Joined: Jan 2008
Posts: 37
Again, I will say thanks for the feedback.

And after reading your postings I am hoping (REALLY hoping) to have the same dumb luck the next time I try to record as I had the last time.

Cheers.

Previous Thread
Next Thread
Go To

Link Copied to Clipboard
ChatPG

Ask sales and support questions about Band-in-a-Box using natural language.

ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.

PG Music News
Update to Build 10 of RealBand® 2026 for Windows®!

If you're already using RealBand 2026 for Windows, download build 10 to get all the latest additions and enhancements.

Band-in-a-Box® 2025 for Mac® users: Build 904 now available!

If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.

Band-in-a-Box® 2026 for Windows® users: Build 1237 is now available!

Already a Band-in-a-Box 2026 for Windows user? Stay up to date and download the build 1237 to get all the latest additions and enhancements.

PowerTracks Pro 2026 for Windows is Here!

PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.

The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.

The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.

Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!

Get started today—first-time packages start at just $49.

Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!

Order now!

Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!

Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!

We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!

Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.

Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.

There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!

Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!

Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.

If you need any help deciding which package is the best option for you, just let us know. We are here to help!

Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!

Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!

We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!

There are over 100 new features in Band-in-a-Box® 2026 for Windows®.

When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.

Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.

Happy New Year!

Thank you for being part of the Band-in-a-Box® community.

Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!

Forum Statistics
Forums57
Topics86,094
Posts800,160
Members40,033
Most Online44,367
Mar 4th, 2026
Newest Members
Matt1575, Christian210, jaycallahanart, roshan2121, Din
40,033 Registered Users
Top Posters(30 Days)
MarioD 138
rsdean 97
DC Ron 89
WaoBand 77
Today's Birthdays
jamline, JazzMAn68
Powered by UBB.threads™ PHP Forum Software 7.7.5