Incidentally, you CAN still get it to work by simply renaming one of the existing PDFs to match the name that the in-program link is looking for.

This is not ideal, because the information in the PDFs is split into one for version 2010_5 and another 'Upgrade' one with some information about 2011.

Probably the best one to link to is the 2010_5 as it's got by far the most information in it.

Rename it to Band-in-a-Box 2010 Mac Upgrade Manual.pdf


Obviously, if your version has different files and links then rename accordingly. The one the program looks for comes up on the screen if it can't find it.

There is also a printed manual version out for Version 2011 for Macintosh which has all the up to date information (well, apart from a few minor errors in it...) and is laid out differently. Getting a PDF version of that would be ideal. We could rename it to match the bad link, and then have a full working manual setup.


Perhaps, if we're lucky, pgmsuic might post a link here to let us download a PDF to match the current printed Version 2011 for Mac? Please...

EDIT: AHA! They already did. Thanks to the wonderful Kent from Support for pointing it out. Get the update patch from here:

Click here forUpdates and get build 26 or later

You'll get the 330 pages 2011 version in PDF installed. Rename as above if you want it to work with the old in-program link, or just open directly it off the drive. Apparently the link is slated to be fixed in a later patch. At which point we could just rename it back again to its proper name.


Chris

Last edited by hakea; 06/16/11 07:52 PM.