|
Log in to post
|
Print Thread |
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Nov 2011
Posts: 53
Enthusiast
|
OP
Enthusiast
Joined: Nov 2011
Posts: 53 |
Trying to help my Dad out here. He was using and old Roland daughterboard that attached to an ISA Soundblaster 16 sound card. The card, or perhaps the slot stopped working. Upgraded him to a newer system.. Problem is he doesn't like the sound of the Forte, or TTS-1. I tried hooking up his Roland SD-35 via USB MIDI interface and that works, however, it often gets a bFL error message which means buffer full. The folks at Roland told me to turn off "soft thru" on the SD-35, but when I did that, then I got no sound at all. So I don't know how to fix this buffer full problem that comes up randomly. Is this common when using a hardware synth via USB MIDI interface? What other options are there? Are there any sound cards that exist that have good sounding general midi sounds built into them? It's hard to believe that the old Roland sounds from the 1990s sound better than the stuff in existence today.. What am I missing here?
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 22,165
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,165 |
Have you tried tinkering with the thru settings in BiaB? This may help with the buffer overflow. It is not a common problem to my knowledge so some setting is likely causing it.
Turning off the thru on the Roland shouldn't cause it to stop making sound, just to not send MIDI out the out port. Are you *sure* you are hearing the SD-35, and not the softsynth in BiaB (via midi coming back from SD-35)? Is reroute MIDI to softsynth turned off in BiaB?
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Nov 2011
Posts: 53
Enthusiast
|
|
OP
Enthusiast
Joined: Nov 2011
Posts: 53 |
Hi, I don't know much about the program, so no, I haven't tinkered with any thru settings in BiaB. The only setting I changed was the MIDI driver setup to use the USB MIDI interface. What do you suggest I change the BiaB settings to? I don't know why the sound stops when I turn the thru off on the SD-35. Apparently that's not supposed to happen if it's supposed to be the fix =(
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 22,165
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,165 |
Check if you still have the 'reroute MIDI to DXi' box checked. If you chose the USB out, and shut off the thru on that USB device, this *may* prevent the MIDI from reaching the soundsource (which would be a softsynth)via MIDI in. This would explain the sound stopping when thru is disabled in the SD-35. Otherwise I don't understand how shutting down MIDI thru on the SD-35 would result in no sound. How are you monitoring (listening to) the SD-35? Unless you have connected the 'audio outputs' of the SD-35 to a mixer or speakers, you are not hearing it in the first place. It does not transmit audio over the MIDI connection.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Nov 2011
Posts: 53
Enthusiast
|
|
OP
Enthusiast
Joined: Nov 2011
Posts: 53 |
I went into the midi options and turned off any midi thru boxes that were checked. I was unable to locate any reroute MIDI to DXi checkboxes though. After unchecking the thru boxes, I turned the thru back off on the SD-35, and still no sound. So I had to change the thru on the SD back to in1 to get sound. I have the speakers connected to the left and right outs of the SD-35. Not sure yet if I'll get the buffer full message, I'll update if we do...
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 22,165
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,165 |
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
There should not ba a cable attached to the THRU port at all in this setup.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 22,165
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,165 |
I think on some Rolands the 'soft-thru' setting he mentioned lets the Thru signal go out the MIDI Out port as well as the hardware thru port.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Nov 2011
Posts: 53
Enthusiast
|
|
OP
Enthusiast
Joined: Nov 2011
Posts: 53 |
I don't have a cable attached to a thru port, on the back there's only in and out. I think what rharv said sounds like what I read in the manual.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 22,165
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,165 |
Yep! This is most often true when the physical thru port is not built in.
Everything working so far?
If the out of the SD-35 is connected to speakers, your next issue will be when he wants to render a song..
Last edited by rharv; 11/13/11 12:24 PM.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Nov 2011
Posts: 53
Enthusiast
|
|
OP
Enthusiast
Joined: Nov 2011
Posts: 53 |
So far so good, haven't had the buffer full error come up yet after unchecking those boxes in BiaB. Rendering the song is not a problem because he uses the SD-35 to play the MIDI files. This actually brings up the main issue he has with all the new technologies: The nice thing about playing MIDI files on the gig is that you can change the tempo, key, etc. on the spot with the SD-35. If he switches to a soft synth or real tracks, these songs have to be rendered to wave audio and then you don't have any control over tempo, key.. So what is/was nice about the old roland daughterboard is that you had the same sounds while composing that you would have on your gig.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 22,165
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,165 |
That's great for live .. but if he ever wants to record a demo it would become an issue. Glad to hear it is working as expected now.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
To clarify why I asked the question, if the SCD-15 is only a pl;ayback synth, and therefore not used as a keyboard or anything like that, he only needs ONE MIDI cable connect from Output of the computer to Input of the synth. If done like that, the Thru settings in either the synth or BiaB are a moot point.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Sep 2003
Posts: 8,333
Veteran
|
|
Veteran
Joined: Sep 2003
Posts: 8,333 |
Unlike mute points which I can't hear. (:
John Conley
Musica est vita
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 22,165
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,165 |
Quote:
To clarify why I asked the question, if the SCD-15 is only a pl;ayback synth, and therefore not used as a keyboard or anything like that, he only needs ONE MIDI cable connect from Output of the computer to Input of the synth. If done like that, the Thru settings in either the synth or BiaB are a moot point.
--Mac
Very True. I believe it has it's own sequencer onboard (thus a use for the MIDI out jack), but for use in BiaB only one connection (MIDI In) would be preferred, especially when troubleshooting the buffer issue.
I see where you were headed with that now. 
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Nov 2011
Posts: 53
Enthusiast
|
|
OP
Enthusiast
Joined: Nov 2011
Posts: 53 |
The SD-35 is actually a sound module and midi file player built into one unit. It plays midi files on a 3.5" floppy disk. I have a unit where the player part of it is bad, however, it can still be used for the sound module portion. So far so good, I haven't gotten the buffer full problem. I have only the MIDI In connected with the USB interface. The SD-50 just came out last year and it's the replacement for the SD-35.. Why it took Roland so many years to come out with a replacement is beyond me. It looks to be a pretty nice unit though!
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Mar 2004
Posts: 1,013
Expert
|
|
Expert
Joined: Mar 2004
Posts: 1,013 |
After reading your original post, I dusted off my Roland SC-88 Pro and played a few midi files and then some BIAB files through it.
I would have to agree that it is miles ahead of Cakewalks TTS-1, Forte or any other virtual GM synth. I started out with a SB-55/SC-55 combination, moved up to a laptop/SC-55 and then to a Laptop/SC-8 Pro.
The SC-88 is now about 17 years old and is still in the same condition I bought it and is still playing strong. Still have the original box and packaging.
Cheers
Kevin
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 22,165
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,165 |
Now you guys see why I'm a Roland fan? The sounds last many years, the hardware just as long .. I have replaced the floppy drive in a couple units; that seems to be the weak point. However, that said, some of those sample/sequence units allow connecting a SCSI hard drive. Much larger, more reliable and faster.
Anyway, glad to hear others hear the same thing. The hardware Roland stuff gets the job done.
I'm sure other brands do too, but I have had such great luck with Roland units I just stick with them as a preference. The menus and such make sense from unit to unit. Can't say the same about Yammie stuff; it just gets too frustrating (and time consuming) for me at times. Nice sounds but I don't want to spend all day getting the track down (and people don't want to pay for all day either!).
For the record, mc3997 , the SD50 also does audio, which the SD35 never did. It doubles as an audio recording interface.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Nov 2011
Posts: 53
Enthusiast
|
|
OP
Enthusiast
Joined: Nov 2011
Posts: 53 |
rharv, my Dad would agree with you about the Roland gear. I don't even know if there are any units comparable to the SD-35, and now SD-50? I'd like to hear how the tones in the SD-50 sound actually.. Have you made any recordings with that unit in BiaB?
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 22,165
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,165 |
I do not have an SD-50, sorry. I just know it also added an audio interface to the SD-35.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support
Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.
Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support
Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins
Join the conversation on our forum.
Band-in-a-Box 2025 for Mac Videos
With the release of Band-in-a-Box® 2025 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll also keep this forum post updated so you can easily find all the latest videos in one convenient spot.
From overviews of new features and walkthroughs of the 202 new RealTracks, to highlights of XPro Styles PAK 8, Xtra Styles PAKs 18, the 2025 49-PAK, and in-depth tutorials — you’ll find everything you need to explore what’s new in Band-in-a-Box® 2025.
Reference this forum post for One-Stop Shopping of our Band-in-a-Box® 2025 Mac Videos — we’ll be adding more videos as they’re released!
Band-in-a-Box 2025 for Mac is Here!
Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!
Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.
2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.
If you have any questions, feel free to connect with us directly—we’re here to help!
Band-in-a-Box 2025 Italian Version is Here!
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box 2025 - Italiano
RealBand 2025 - Italiano
Band-in-a-Box 2025 French Version is Here!
Bonjour à tous,
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
BIAB 2025 - francisation
RealBand 2025 - francisation
Voilà, enjoy!
Band-in-a-Box 2025 German Version is Here!
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Stay up to date—get the latest update now!
|
|
|
|
|
|
|
|
|
|
|
|
Forums58
Topics84,304
Posts777,518
Members39,612
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean