Quote:

Hi, and thanks for the reply. However, when I right click a bar, I do not see "Chord Settings". I see something that starts with "--Substyle Change--". You are talking about right-clicking a bar in the main window in BIAB?

thanks for any response!




Substyle Change comes up if you click on the Bar NUMBER and not on one of the actual chord cells within the bar.

Let's say you have 4 chords entered into a single bar of 4/4 time and you want the chord that is on the 3rd beat to actually start on the "and" of the 2nd beat.

Place the cursor over the 3rd chordname and RightClick. A menu window should appear with a list of options, look for the Chord Settings there and select it.

The rest is done by following the above directions, make sure that you have selected the 3rd beat chord with the little radio buttons at top of Chord Settings window, then select "Push by 1/8" in the lower left of same window. While you are there, good idea to examine all the other possibilities available in that window for future use.

The only thing we cannot do is place more than one chord per cell. Unfortunately. In other words, if you wanted a chord on the "AND" of 2 plus another chord right on 3, well, we have no way of doing that in the current versions.


--Mac