|
Log in to post
|
Print Thread |
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Feb 2009
Posts: 95
Enthusiast
|
OP
Enthusiast
Joined: Feb 2009
Posts: 95 |
I've explored all the FAQs and searched the forum for this issue but haven't find any pointers yet...
I'm discovering that ALL the songs for which I've produced wav files are MUCH quieter than the professionally-produced backing tracks I've purchased - so when I'm playing back I have to keep drastically adjusting the volume control.
The answers I've found are:
1. Adjust the windows sound card settings from the WAV button in BIAB - but this seems to have no effect on dxi, which I'm using.
2. Add a dB audio boost of 10dB in the WAV creation dialog - but this is surely simpl to adjust comparative volume for pre-recorded real tracks, and doesn't seem to affect the overall volume.
3. Use my CD burning software to adjust the final volume comparatively with other tracks. But I have over 150 tracks in total, only 10 of which are from BIAB. They are stored as files on my computer, not on CD, so I can't adjust during the burning process. If I was to get my player to adjust them it would take forever for it to optimise all 150 tracks to the same level.
Is there anything else I can do to make the output volume significantly louder when using dxi?
Thanks
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2007
Posts: 1,616
Expert
|
|
Expert
Joined: May 2007
Posts: 1,616 |
Make sure your part and combo volume is up. 90 is the default and can go up to 127. You can also use a DXI plugin such as PG Dynamics. Be sure to use the PG PeakLimiter also in the last slot.
Rachael
Last edited by Rachael; 03/24/09 05:21 AM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jul 2007
Posts: 888
Expert
|
|
Expert
Joined: Jul 2007
Posts: 888 |
Many people do a final remix in RB, PT or audacity, making an adjustment to the file to bring it into consistency with other reference recordings. You might try that on you 10 or so BIAB tracks. You would only have to post process these to make them consistent with the others that you already own.
PM
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
The difference between your files and those purchased pro files is in the MASTERING.
They are Mastered, yours has not been Mastered at all.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jul 2000
Posts: 26,889
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 26,889 |
For a quick and reasonably easy solution, look at Ozone 4 at www.izotope.com and while you are there, read their free guide on mastering at http://www.izotope.com/products/audio/ozone/guides.html The first three pages of the text will clear it all up for you. With Ozone, you can make subtle improvements, or (horrors) slam your audio right to the max. Ozone is not free; it costs $250 for new users, and it is available as a DirectX or VST plugin. Many of us who use SONAR highly recommend it as a one-program mastering solution. It bridges the gap between nothing and hugely expensive mastering tools. Plus, it requires no PACE or dongle (undesirable forms of copy protection). It may be the quickest and easiest way to improve home studio recordings.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Oct 2008
Posts: 1,259
Expert
|
|
Expert
Joined: Oct 2008
Posts: 1,259 |
Like PapaMike said.....I think Audacity is free. I use WavePad which is also free. When I'm done rendering, I pull the file into WavePad and "normalize". I also eliminate the "tics", fade out the ending, etc..This has worked as a quick fix for me.
Cornet Curmudgeon
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Feb 2004
Posts: 8
Newbie
|
|
Newbie
Joined: Feb 2004
Posts: 8 |
I've been having this problem for years. Anything I render produces a very weak signal--generally peaking at about -18dB. I use Audition to normalize all my BiaB WAVs, but this is just not right, because when you do that you also raise your noise floor. I've maxed out every fader I can find (soundcard in/out, DXi, inst==127, etc.) and it still renders way too low. I figure I must be still missing something.
Has anyone been able to directly render a healthy-level WAV file? If so, what's your setup or secret?
Nate
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Mar 2009
Posts: 235
Apprentice
|
|
Apprentice
Joined: Mar 2009
Posts: 235 |
Did you try to compare it with the original files? I mean if they also are softly recorded, then that's just the way it is. And yes normalizing brings up the noise as well, but it will be the only way if this is standard level. If you do it through a normalizing or a volume control, the effects remain the same. You in both way lift all information in the recording upwards. I must say the recordings I made up to now, have not been the best quality always in volume or in sound/colour, but good enough to fix it in the mix. But well in fact this doesnot really answer your question I guess...
I'll be back...
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jan 2009
Posts: 436
Journeyman
|
|
Journeyman
Joined: Jan 2009
Posts: 436 |
I had this problem with the very first wav file I tried to render. Someone posted to add +10 Db at the bottom right of the rendering page, before hitting render. This has worked for me as far as volume only. Not quality of recording. That I try to do with effects and especially the Pg dynamics plug in seems to really add punch. Especially in RB where you can BEEF up individual tracks in the mix. (Not just volumes here, but quality, effect wise.) As Mac says, we will never achieve a true mastered quality sound at home, probably, but many I have heard on this forum are very close.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Feb 2004
Posts: 8
Newbie
|
|
Newbie
Joined: Feb 2004
Posts: 8 |
> ...add +10 Db at the bottom right of the rendering page, before hitting render...
+10dB would be nice. +15 even better. I looked for a place in the Render dialog box to put that and the only place was for the merged audio. I tried that anyway and it didn't help. It's weird because both RealDrum output and VSC/DXi output are low. Luvs3rds,
did you find a way to boost MIDI and/or RealDrums/RealTracks to a normal level?
One thing I've just noticed, though, is if i bring up the VSC/DXi window and put all the volumes to 127, they stay there until I do a render. Then, right when the render is done, they all snap down to 90. Does that mean they were at 90 for the render session? If so, this may be part of my problem. How do I get those volumes to stay at 127?
I am ok with the general quality--I just want dry tracks, and I can sweeten them up in Audition. It's just this volume thing that's driving me nuts. A little weak and I would just live with it, but with a -20dB puny signal, I just gotta think something's wrong with my setup.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2007
Posts: 1,616
Expert
|
|
Expert
Joined: May 2007
Posts: 1,616 |
The 'Adjust Audio track volume by' should adjust any audio including RealDrums and RealTracks. As far as Midi, the volume is determined in the style as programmed. Raising the Master (ctrl alt D) or part volume should reflect in the Render. Be sure to save with patches (Alt F2) and have Save settings for Volume checked. As a last resort you could try Normalizing in Opts|Prefs|Arrange but you would be overriding the mix BIAB has put for the instruments.
Rachael
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Sounds like the RECORD level fader of your soundcard INput is turned down too low.
Remember, when you click on the little speaker icon, the first faders you typically see are the PLAYBACK faders.
Record fader is usually accessed via a menu there, like File -> Properties or the like.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Mar 2009
Posts: 31
Enthusiast
|
|
Enthusiast
Joined: Mar 2009
Posts: 31 |
I've spent hours trying to fix this with no results at all.
Everything is up to the max and it seems to make no difference. I can see the difference in the play and record meters in BIAB, but no matter what I play with, it has no effect at all.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Have you located the Record Properties of your soundcard?
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Mar 2009
Posts: 31
Enthusiast
|
|
Enthusiast
Joined: Mar 2009
Posts: 31 |
Quote:
Have you located the Record Properties of your soundcard?
Yes the recorded properties are all maxed out.
It really seems to be something with the audio settings in BIAB.
Probably has something to do with the DXi settings, but I can't put my finger on it.
Or there could be no solution at all, except to go to an outside force like Audition or Sounbooth.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Mar 2009
Posts: 31
Enthusiast
|
|
Enthusiast
Joined: Mar 2009
Posts: 31 |
It has to do with the real tracks for some reason.
I just tested it with the midi instruments and the sound is perfect.
It would explain why the bass is so loud, when I use the default midi bass instead of the real tracks bass.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2002
Posts: 7,367
PG Music Staff
|
|
PG Music Staff
Joined: May 2002
Posts: 7,367 |
Hi,
Someone else suggested the PG Peaklimiter plugin - have you tried that? It should help - add it to a slot in the Synth track tab of the DirectX/VST window, below where you have the VSC selected.
Andrew
PG Music Inc.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jan 2009
Posts: 436
Journeyman
|
|
Journeyman
Joined: Jan 2009
Posts: 436 |
My knowledge is limited on this, but what I noticed is I will have a song completely dialed in, as far as mix, and volumes. I go to render, then hit the TEST WAV button, and invariaby, the midi will be really LOUD compared to the realtracks. I delete the wav, go back in and lower the midi to like 50, max out the Real Tracks. . . Then add 10 or 15 Db in the render window, then save to wav. This is if I am going somewhere else like RB, to do a final edit. This is usually where you can use the musician's favorite line of "Fix it in the Mix". So far, it works good if you are going to another program. If you are doing it all in BIAB, sometimes I have changed numbers 2-3 times before it sounded "kinda like" I originally saved it.
Bottom line, I have maxed out to 127, and then imported to RB or whatever, and just fixed it.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jan 2002
Posts: 1,486
Expert
|
|
Expert
Joined: Jan 2002
Posts: 1,486 |
Hi rlefebvr,
I found this problem in the early days of this version and after trying 10 takes to get base settings of the differences - I decided to record in real time to get the exact Midi/RealTrack balance I needed
I do this using the "What you hear" feature on soundcards like the SB X-Fi Xtreme Gamer and others - it takes more time than rendering but you only do it once
You can even do adjustments like decrease/increase volumes or fade endings whilst recording in real time
jazzman
BIAB - RealBand - 2022
Windows 10 64
Zoo computer with 7i processor- SSD 1TB -2TB HDD
Roland keyboards
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jul 2007
Posts: 30
Enthusiast
|
|
Enthusiast
Joined: Jul 2007
Posts: 30 |
Quote:
I decided to record in real time to get the exact Midi/RealTrack balance I needed
I do the same. I sing and play guitar so run everything through a mixer, then normalize the resultant WAV file (I use Audacity on another laptop to record). Final result is a reasonably good mix with volume equivalent to commercially mastered tracks.
I use a lot of intros from the original recording if I do the song in the same key, and have found that I have to reduce the volume from the commercial track by -10db to get it in the neighborhood of the volume in BIAB (with default 90 levels).
pete
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Holiday Weekend Hours
Our Customer Service hours this weekend are as follows:
Friday, April 18: 8:00 - 4:00
Saturday, April 19: closed
Sunday, April 20: closed
Monday, April 21: Regular hours
Thank you!
Band-in-a-Box 2025 French Version is Here!
Bonjour à tous,
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
BIAB 2025 - francisation
RealBand 2025 - francisation
Voilà, enjoy!
Band-in-a-Box 2025 German Version is Here!
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Stay up to date—get the latest update now!
Update to RealBand® 2025 Build 5 Windows Today!
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
Get the latest update today!
PowerTracks Pro Audio 2025 for Windows is Here!
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
www.pgmusic.com/powertracks.htm
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
Band-in-a-Box® for iOS® :Summary video.
Check out the forum post for more information.
|
|
|
|
|
|
|
|
|
|
|
|
Forums58
Topics83,914
Posts772,192
Members39,487
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
|
|
|
There are no members with birthdays on this day. |
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean