Log in to post
|
Print Thread |
|
|
|
|
Off-Topic
|
Joined: Mar 2001
Posts: 207
Apprentice
|
OP
Apprentice
Joined: Mar 2001
Posts: 207 |
My gear: PC, Win 7, BIAB, Korg 05R/W synth box, Roland Quand-Capture USB 2.0 soundcard.
I installed my new Roland soundcard with no problem. I chose it as MIDI output and MIDI input from BIAB MIDI driver options. MIDI out from Roland goes MIDI in of Korg. Korg is responding, I can see it from the front panel and I also plugged headphones to the back of the Korg and I can hear music if I put the sound of the Korg to the highest level. So the sound is too low.
Now I don't understand how I connect the Korg output to the Roland. I used to have a souncard that had a place for two "line in" cables but Roland has only something called "Coaxial 3/4 in". Should I connect the Korg to that with only one cable (so it will be mono)?
I have monitor speakers and I used to connect them to the output of my only soundcard. Roland has also a place for output cables but how do I get the Korg sound firt into the soundcard? Or is the Korg box too old equipment for my new installation?
Matti
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Mar 2001
Posts: 207
Apprentice
|
OP
Apprentice
Joined: Mar 2001
Posts: 207 |
Some progress.
I connected the "line out" from Korg to the front panel Inout 1 and Input 2 jacks and now the audio sound goes to the Roland and I can hear the sound from the headphones that are connected to the Roland. I also found out that I can add the volume of the channels from the Control Panel of the Roland software.
But there is still no sound in the speakers.
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2003
Posts: 21,043
Veteran
|
Veteran
Joined: Dec 2003
Posts: 21,043 |
I have the Octa-Capture so maybe this will also work on the Quad. Connect the Quad outputs to your speakers or if you have a mixer prior to the speakers than connect it to the mixer. On the Octa there is both input and output mixers. Be sure the output sliders (levels) are up. Also be sure that the input levels are up on both channels.
I hope this helps.
Last edited by MarioD; 12/04/12 10:35 AM.
My goal this weekend is to move just enough each day so that no one pokes me to see if I'm dead or not.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2000
Posts: 38,502
Veteran
|
Veteran
Joined: May 2000
Posts: 38,502 |
Quote:
...but Roland has only something called "Coaxial 3/4 in". Should I connect the Korg to that with only one cable (so it will be mono)?
That won't work because the Coaxial Input is a DIGITAL input. That's why it has both channels on the one plug.
Just because it uses an RCA socket does not mean that any signal with an RCA plug will work through it.
See your documentation for what to do with the Coaxial digital connect, for example, you may be able to connect an audio device that has a digital SP/DIF output to it, yielding a two channel connect. Advantaqes of that are your audio stays in the digital domain, avoiding two conversions, one to analog at output and the other to digital again after the input, just to connect two devices.
The Quad Capture Qwikspec from Roland webpage states that the device has two 1/4" Line Level Inputs and that is where the L and R Line Outputs from a keyboard or synth would have to be connected to get Audio into the computer. These inputs are right in the center of the two XLR MIC jacks, combination jacks because it is either/or because this is a device that has two shared analog inputs, connecting a mic with XLR or when connecting using the 1/4" to center the circuit automatically knows to expect and deal with the Line Input when you set it for that.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2011
Posts: 104
Apprentice
|
Apprentice
Joined: Jul 2011
Posts: 104 |
I'm having a different problem with my new Quad-Capture in Read Band. When I try to record a vocal in stereo I get only the left or right channel but not both. I find nothing on the Roland unit itself or it's control panel software that helps. Nor can I find a way in Real Band to accept the signal from the Quad-Capture in stereo. Seems like there should be a check box for mono or stereo, but I can't find one or recognize it. Any ideas?
Microsoft Windows 7 Professional (64-bit) Processor Intel Core i5-2400 @ 3.09 GHz 1 processor, 4 cores 8192 MB DDR3 SDRAM 666MHz Geekbench score 7761
SonnyRay
Keep on Rockin' Sonny Ray
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2003
Posts: 21,043
Veteran
|
Veteran
Joined: Dec 2003
Posts: 21,043 |
My music computer is not on so I can’t verify this in RB but this is how I do it in Sonar. I believe it can be done like this in RB also if I remember correctly.
If you are using only one mic: Plug your mic into the Quad-Capture, I will call it input 1 and turn up the volume sliders, both input and output, for input 1 on the Quad.. In RB select input 1 as the input sound source, select it as stereo then increase the record volume on that track in RB. You will get the same mono wav but on both the left and right sides.
If using two mics (or a stereo mic) plug each side of the mic into separate Quad inputs and repeat the volume process for each input. Set RB to record one track for the left mic channel and another track for the right track channel. Set the input volume on both RB channels and record. You can either have each RB track record in stereo or mono and pan each one hard left and right.
Having said that may I ask why you want to record a vocal in stereo? I always record vocals in mono then it if want to have it in stereo I clone the track and pan one track hard left and the other hard right. I will usually add some kind of effect on one of the tracks. Another way is to run the mono vocal into a stereo out effect and pan the effect left and right.
I hope this helps and good luck.
My goal this weekend is to move just enough each day so that no one pokes me to see if I'm dead or not.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2011
Posts: 104
Apprentice
|
Apprentice
Joined: Jul 2011
Posts: 104 |
Hi, got this working. Thanks for your advice - I appreciate it. SonnyRay
Keep on Rockin' Sonny Ray
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box User Video Tutorials!
If you've reviewed our Support page, you've probably noticed the Videos page, which separates our Band-in-a-Box® tutorial videos by category: Overview, VST DAW Plugin, Setup, Beginner, Intermediate, Advanced, and there's even an Archive category to go down memory lane... (You'll also find these videos on our YouTube Channel.)
It's always great to hear how other Band-in-a-Box® users create their songs, especially when they explain in detail what they're doing. Like Henry Clarke's YouTube Channel, Henry Clarke - Senior Musicians Unite! There you'll find his ALL Band-in-a-Box Tutorials playlist with over 50 videos! His top-three most watched videos include "How to Get Started with Band-in-a-Box," "How I use the Audio Chord Wizard in Band-in-a-Box," and "How to Create An Effective Solo Using Band-in-a-Box" - however he touches on many other topics and also demonstrates his own Band-in-a-Box® songs in the Band-in-a-Box Created Songs playlist!
You're guaranteed to find some helpful videos when you visit Henry Clarke's channel!
Band-in-a-Box® 2024 Italian for Windows is Here!
Ci siamo dati da fare e abbiamo aggiunto oltre 50 nuove funzionalità e una straordinaria raccolta di nuovi contenuti, tra cui 222 RealTracks, nuovi RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, Playable RealTracks Set 3, Playable RealDrums Set 2, due nuovi set di "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 e altro ancora!
Tutti Pacchetti | Nuove Caratteristiche
Band-in-a-Box® 2024 French for Windows is Here!
Band-in-a-Box® 2024 apporte plus de 50 fonctions nouvelles ainsi qu'une importante de contenus nouveaux à savoir : 222 RealTracks, des RealStyles nouveaux, des SuperTracks MIDI, des Etudes d'Instruments, des Prestations d'Artistes, des "Morceaux avec Choeurs", un Set 3 de Tracks Jouables, un Set 2 de RealDrums Jouables, deux nouveaux Sets de "RealDrums Stems", des Styles XPro PAK 6, des Xtra Styles PAK 17 et bien plus encore!
Tous Packages | Nouvelles Fonctionnalités
Video: Making a Song with Band-in-a-Box®, ChatGPT, and Synth V
Take your Band-in-a-Box® project to a whole new level when you incorporate ChatGPT and Synth V to add lyrics and vocals to your song!
We wanted to demonstrate how this is done with our video, where we show you how to go from nothing to a finished "radio ready" modern pop song by combining the features of Band-in-a-Box®, ChatGPT, and Synth V!
Listen to the finished song, so you get a listen to the finished product: https://demos.pgmusic.com/misc/behindthefame.m4a
If you like it, watch the video. Either way, let's hear your comments!
Henry Clarke: Revolutionize Your Band-in-Box® Tracks with Regenerating Function
User Video: Next-Level AI Music Editing with ACE Studio and Band-in-a-Box®
Band-in-a-Box® 2024 German for Windows is Here!
Band-in-a-Box® 2024 für Windows Deutsch ist verfügbar!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 und mehr!
Paket | Was ist Neu
|
|
|
|
|
|
|
|
|
|
|
Forums66
Topics81,972
Posts739,512
Members38,627
|
Most Online2,537 Jan 19th, 2020
|
|
|
|
|
|
|
|
|