|
Log in to post
|
Print Thread |
|
|
|
|
|
Off-Topic
|
Joined: Mar 2001
Posts: 212
Apprentice
|
OP
Apprentice
Joined: Mar 2001
Posts: 212 |
My gear: PC, Win 7, BIAB, Korg 05R/W synth box, Roland Quand-Capture USB 2.0 soundcard.
I installed my new Roland soundcard with no problem. I chose it as MIDI output and MIDI input from BIAB MIDI driver options. MIDI out from Roland goes MIDI in of Korg. Korg is responding, I can see it from the front panel and I also plugged headphones to the back of the Korg and I can hear music if I put the sound of the Korg to the highest level. So the sound is too low.
Now I don't understand how I connect the Korg output to the Roland. I used to have a souncard that had a place for two "line in" cables but Roland has only something called "Coaxial 3/4 in". Should I connect the Korg to that with only one cable (so it will be mono)?
I have monitor speakers and I used to connect them to the output of my only soundcard. Roland has also a place for output cables but how do I get the Korg sound firt into the soundcard? Or is the Korg box too old equipment for my new installation?
Matti
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Mar 2001
Posts: 212
Apprentice
|
|
OP
Apprentice
Joined: Mar 2001
Posts: 212 |
Some progress.
I connected the "line out" from Korg to the front panel Inout 1 and Input 2 jacks and now the audio sound goes to the Roland and I can hear the sound from the headphones that are connected to the Roland. I also found out that I can add the volume of the channels from the Control Panel of the Roland software.
But there is still no sound in the speakers.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2003
Posts: 23,216
Veteran
|
|
Veteran
Joined: Dec 2003
Posts: 23,216 |
I have the Octa-Capture so maybe this will also work on the Quad. Connect the Quad outputs to your speakers or if you have a mixer prior to the speakers than connect it to the mixer. On the Octa there is both input and output mixers. Be sure the output sliders (levels) are up. Also be sure that the input levels are up on both channels.
I hope this helps.
Last edited by MarioD; 12/04/12 10:35 AM.
Whenever I get something stuck in the back of my throat, I dislodge it by drinking a beer.
It's called the Heineken Maneuver.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Quote:
...but Roland has only something called "Coaxial 3/4 in". Should I connect the Korg to that with only one cable (so it will be mono)?
That won't work because the Coaxial Input is a DIGITAL input. That's why it has both channels on the one plug.
Just because it uses an RCA socket does not mean that any signal with an RCA plug will work through it.
See your documentation for what to do with the Coaxial digital connect, for example, you may be able to connect an audio device that has a digital SP/DIF output to it, yielding a two channel connect. Advantaqes of that are your audio stays in the digital domain, avoiding two conversions, one to analog at output and the other to digital again after the input, just to connect two devices.
The Quad Capture Qwikspec from Roland webpage states that the device has two 1/4" Line Level Inputs and that is where the L and R Line Outputs from a keyboard or synth would have to be connected to get Audio into the computer. These inputs are right in the center of the two XLR MIC jacks, combination jacks because it is either/or because this is a device that has two shared analog inputs, connecting a mic with XLR or when connecting using the 1/4" to center the circuit automatically knows to expect and deal with the Line Input when you set it for that.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2011
Posts: 110
Apprentice
|
|
Apprentice
Joined: Jul 2011
Posts: 110 |
I'm having a different problem with my new Quad-Capture in Read Band. When I try to record a vocal in stereo I get only the left or right channel but not both. I find nothing on the Roland unit itself or it's control panel software that helps. Nor can I find a way in Real Band to accept the signal from the Quad-Capture in stereo. Seems like there should be a check box for mono or stereo, but I can't find one or recognize it. Any ideas?
Microsoft Windows 7 Professional (64-bit)
Processor Intel Core i5-2400 @ 3.09 GHz
1 processor, 4 cores
8192 MB DDR3 SDRAM 666MHz
Geekbench score 7761
SonnyRay
Keep on Rockin'
Sonny Ray
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2003
Posts: 23,216
Veteran
|
|
Veteran
Joined: Dec 2003
Posts: 23,216 |
My music computer is not on so I can’t verify this in RB but this is how I do it in Sonar. I believe it can be done like this in RB also if I remember correctly.
If you are using only one mic: Plug your mic into the Quad-Capture, I will call it input 1 and turn up the volume sliders, both input and output, for input 1 on the Quad.. In RB select input 1 as the input sound source, select it as stereo then increase the record volume on that track in RB. You will get the same mono wav but on both the left and right sides.
If using two mics (or a stereo mic) plug each side of the mic into separate Quad inputs and repeat the volume process for each input. Set RB to record one track for the left mic channel and another track for the right track channel. Set the input volume on both RB channels and record. You can either have each RB track record in stereo or mono and pan each one hard left and right.
Having said that may I ask why you want to record a vocal in stereo? I always record vocals in mono then it if want to have it in stereo I clone the track and pan one track hard left and the other hard right. I will usually add some kind of effect on one of the tracks. Another way is to run the mono vocal into a stereo out effect and pan the effect left and right.
I hope this helps and good luck.
Whenever I get something stuck in the back of my throat, I dislodge it by drinking a beer.
It's called the Heineken Maneuver.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2011
Posts: 110
Apprentice
|
|
Apprentice
Joined: Jul 2011
Posts: 110 |
Hi, got this working. Thanks for your advice - I appreciate it.
SonnyRay
Keep on Rockin'
Sonny Ray
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support
Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.
Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support
Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins
Join the conversation on our forum.
Band-in-a-Box 2025 for Mac Videos
With the release of Band-in-a-Box® 2025 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll also keep this forum post updated so you can easily find all the latest videos in one convenient spot.
From overviews of new features and walkthroughs of the 202 new RealTracks, to highlights of XPro Styles PAK 8, Xtra Styles PAKs 18, the 2025 49-PAK, and in-depth tutorials — you’ll find everything you need to explore what’s new in Band-in-a-Box® 2025.
Reference this forum post for One-Stop Shopping of our Band-in-a-Box® 2025 Mac Videos — we’ll be adding more videos as they’re released!
Band-in-a-Box 2025 for Mac is Here!
Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!
Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.
2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.
If you have any questions, feel free to connect with us directly—we’re here to help!
Band-in-a-Box 2025 Italian Version is Here!
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box 2025 - Italiano
RealBand 2025 - Italiano
Band-in-a-Box 2025 French Version is Here!
Bonjour à tous,
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
BIAB 2025 - francisation
RealBand 2025 - francisation
Voilà, enjoy!
Band-in-a-Box 2025 German Version is Here!
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Stay up to date—get the latest update now!
|
|
|
|
|
|
|
|
|
|
|
|
Forums58
Topics84,303
Posts777,509
Members39,612
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean