|
Log in to post
|
Print Thread |
|
|
|
|
|
Off-Topic
|
Joined: Oct 2008
Posts: 8,109
Veteran
|
OP
Veteran
Joined: Oct 2008
Posts: 8,109 |
USB 3 has been out for a while. It's supposed to be faster than firewire. But I have searched Musicians Frienmd and other online music stores for the strings "USB3" and "USB 3" with no hits.
Does anybody here know if a USB3 audio interface is available yet from any manufacturer?
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2000
Posts: 27,505
Veteran
|
Veteran
Joined: Jul 2000
Posts: 27,505 |
Right, I haven't seen any either. It is a bit odd after this much time.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus 192 & Faderport 8, Royer 121, Slate VSX, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2003
Posts: 24,523
Veteran
|
Veteran
Joined: Dec 2003
Posts: 24,523 |
The bumper sticker said "I'm a veterinarian, therefore I can drive like an animal". Suddenly I realized how many proctologists are on the road.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2000
Posts: 27,505
Veteran
|
Veteran
Joined: Jul 2000
Posts: 27,505 |
Hmm. The Aardvark (great name!) clearly says USB3, but I think we're looking at a mislabeled Ethernet connection. Perhaps there is a breakout cable not shown?
The Presonus, though, is not yet available and the description is unclear: does it run on USB3 at USB3 speeds, or is there just software to allow it to work when plugged into USB3?
Last edited by Matt Finley; 05/10/13 07:01 AM. Reason: corrected info on Aardvark
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus 192 & Faderport 8, Royer 121, Slate VSX, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2005
Posts: 4,047
Veteran
|
Veteran
Joined: Dec 2005
Posts: 4,047 |
Matt,
Makes a good point.
I purchased a "USB3" specified 1 tera backup HD.
It does work, but does not seem to be any faster than my older ones.
Good Luck!
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Oct 2008
Posts: 8,109
Veteran
|
OP
Veteran
Joined: Oct 2008
Posts: 8,109 |
in the case of the Aardvark product, the ad suggests that USB3 is the NAME of it (because it has 3 inputs and 3 outputs)
I saw nothing in the ad for either product that said it supports the USB3 protocol. If either of them did, I'm thinking it would show up repeatedly throughout the ads because everyone is looking for a USB3 compliant interface.
In both cases the interface is listed simply as "USB"
For me, that's a red flag.
EDIT: the Aardvark ad says "this product is no longer available at ZZsounds"
Last edited by Pat Marr; 05/10/13 07:09 AM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2000
Posts: 27,505
Veteran
|
Veteran
Joined: Jul 2000
Posts: 27,505 |
EDIT: the Aardvark ad says "this product is no longer available at ZZsounds"
Perhaps someone read this thread and then spotted the Ethernet connection labeled as USB3? That was quick.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus 192 & Faderport 8, Royer 121, Slate VSX, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Mar 2007
Posts: 827
Expert
|
Expert
Joined: Mar 2007
Posts: 827 |
Usb3 compliant just means that it "should" run under usb3, which is not always the case. Both specs wouldn't warrant the usb3 performance anyway, 2-3 channels at 48Hz. I have a focusrite Scarlett 8i6 which is usb3 compliant and runs nicely under usb3. I think the whole range of Scarletts are like that now. It was a choice between the focusrite and the presonus when I got my new laptop, but presonus couldn't guarantee compliance at the time. It's a bummer that cardbus has died, I loved my emu1616m.
Chris
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2002
Posts: 10,199
Veteran
|
Veteran
Joined: Jan 2002
Posts: 10,199 |
I don't find it surprising that there isn't any USB 3.0 audio hardware available yet. First of all, it runs at 5Gb/s, so to be able to utilize the data transfer capability of that, you have to have the ability to transfer the incoming and outgoing data at 5Gb/s, which is pretty durned fast.
Since USB 2.0 can easily handle multiple channels of 24/96 audio, there is not real reason to invest in upgrading to USB 3.0, at least for audio devices. My question becomes, how many of you are running more than 8 channels in, and 8 channels out at 24/96? If you are, what devices are you using, and have you considered a PCI-e solution?
I don't see the NEED for anything more than USB 2.0, right now. But, on the other hand, I don't see a need for anything more than 24/48, either, at least not in my studio. Oh, and don't get me started on 192k, or 384k sample rates, either.
Gary
I'm blessed watching God do what He does best. I've had a few rough years, and I'm still not back to where I want to be, but I'm on the way and things are looking far better now than what they were!
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Mar 2007
Posts: 827
Expert
|
Expert
Joined: Mar 2007
Posts: 827 |
It could become a problem as newer notebooks tend to only have usb3 ports. Then you have to find a soundcard at least compliant with usb3. Not all soundcards are, and as most companies don't use it, they don't test it either.
Chris
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2000
Posts: 38,502
Veteran
|
Veteran
Joined: May 2000
Posts: 38,502 |
The USB3 port should be backwards compatible, therefore it should run a USB2 device as designed.
You do not have to have a USB3 device just because your machine happens to support USB3 ports.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Nov 2008
Posts: 897
Expert
|
Expert
Joined: Nov 2008
Posts: 897 |
Mac, I've been blogging on Musikmesse synth products. Can't believe that there isn't some USB 3 blossoming out right now.
Read Craigs article on synths and look for more detailed tech analysis of the brand new hardware.
I've got run and find if any RV neighbor has some Vino to share.
Dreamer, dream on.....
Yamaha...Motif ES-8, Motif Rack, CS6X Korg...Karma,Triton Classic, PA-80, M-1+ AkaiSampler-S5000, Roland.. X5080 Rack/G-1000 Arranger Various Guitars/Basses Amps Pedals Rec.Equip.
Plus, BIAB 2015 and Sonar Platinum 2015 Upgrade from Cakewalk's Sonar X-3
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2002
Posts: 10,199
Veteran
|
Veteran
Joined: Jan 2002
Posts: 10,199 |
Let's look at this.
24 bits x 96kHz sample rate = 2304000 bps Times 2 for stereo = 4608000 bits per second. Times 8 for eight stereo channels = 36,864,000 bits per second Time 2 for both directions = 73,728,000 bits per second. Times 2 to double the speed in both directions = 294,912,000.
USB 2.0 bandwidth, 480,000,000 bits per second. Even with overhead, I've still got 100Mb/s to play with. So, basically, on a single USB 2.0 controller, I could probably run 8 stereo channels down, and 8 stereo channels up without any problem.
If you're going to do more than 8 by 8, you should probably be looking at the PCI or PCI-e interfaces.
This is why you aren't seeing any USB 3.0 audio interfaces.
Mac, can you check my math, make sure it's correct, please?
Gary
I'm blessed watching God do what He does best. I've had a few rough years, and I'm still not back to where I want to be, but I'm on the way and things are looking far better now than what they were!
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2014
Posts: 1
Newbie
|
Newbie
Joined: Jan 2014
Posts: 1 |
MADIface XT from RME, if you can afford it, claims to be the world's first USB 3.0 device. RME Home
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Feb 2011
Posts: 204
Apprentice
|
Apprentice
Joined: Feb 2011
Posts: 204 |
When I was having lots of trouble getting 2014 Everything Pk. to install on my P.C., I had it plugged into one of the two USB3 ports. I was instructed by P.G. Support to not use the supplied HD in a USB3 port. Sometimes it will cause problems in a setup, and BB prefers USB2 instead.-----Leon
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2003
Posts: 24,523
Veteran
|
Veteran
Joined: Dec 2003
Posts: 24,523 |
The bumper sticker said "I'm a veterinarian, therefore I can drive like an animal". Suddenly I realized how many proctologists are on the road.
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
Band-in-a-Box® 2026 for Windows® users: Build 1237 is now available!
Already a Band-in-a-Box 2026 for Windows user? Stay up to date and download the build 1237 to get all the latest additions and enhancements.
PowerTracks Pro 2026 for Windows is Here!
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Order now!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics86,048
Posts799,304
Members40,015
| |
Most Online44,367 Mar 4th, 2026
|
|
|
|
|
|
|
|
|