*You should not be messing around with the ESQ built-in sequencer at all. Ignore it. All you want here is for the Keyboard MIDI output to route to the computer MIDI input and the computer MIDI output to route to the ESQ's internal synthesizer input.

This is from a user manual I found online in an archive site:

Quote:


In the MR/ZR, press the Select button in the SoundFinder Section
Turn the Parameter knob to get to the MIDI OUT Instrument.
This simple setting puts the ZR/MR into multi mode and turns keyboard local
control off.




That should do the trick, but there may be a need to RESET that ESQ to factory settings first, depending upon how many buttons have been pushed and stored in the past.

Here is a link to the site I found:

http://www.fumph.com/?page_id=4


Good luck,


--Mac

PGmusic FAQs, Tutorials and Updates! click here

You must be Audiominds.
www.audiominds.com