I have a Yamaha DGX640 keyboard connected to my laptop computer via a USB-MIDI cable. The laptop computer has an i5 CPU and 8Gigs Ram, running Windows 7 - 64 bit.
I've changed my MIDI driver settings in BIAB2014 per this video, but I'm still experiencing quite a bit of latency. As explained in the video, I've set the MIDI driver to CoyoteWT and the Audio Settings to ASIO (using ASIO4All v2).
Is there something further I can tweak to help lower the latency?
If it helps to analyze the problem, note that I also use the ASIO4All driver with Pianoteq software (NOT concurrently BIAB, of course), and experience no latency there.
Any ideas on what I should try?
Thanks!
Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
I remember that a few years ago, when I installed BIAB on a brand new computer, the latency factor increased considerably even though I had had very little latency only the day before on the previous computer.
Then something happened. I went back to my computer the following day and the (lack of) latency was back to what it had been on my old computer.
I have no idea what I did but it seems that I must have entered into something and simply by entering that and then exiting it, I had changed something.
I mention the above because even though I have no idea what happened, there are some things to try. Below is the process that I would have gone through so it might have been what solved the problem.
Let's try this ...
Actually, before trying anything, save your present settings by using "Opt | Save preferences as ..." - this then gives a way to get back to your present settings if the below attempt is fruitless.
1. Click on "Prefs" (#1).
2. Now select "Midi Driver" (#2).
In the Window that pops up (as shown above) ...
3. Click on "Get Input Drivers" (#3) and then select the input that your keyboard is attached to (#4).
4. Click on "Run Driver Wizard" (#5) and choose the top option for the GS Wavetable Synth. Click OK. Check that the Wavetable synth is selected (#6).
5. Make sure the two check boxes for "Use VST/DXi Synth" and "Route MIDI through MIDI driver" are un-checked (#7).
6. Set #8 to 120 (as per the instructions below this window).
Exit the setup. Close BIAB. Restart the computer. Restart BIAB and try it out.
I hope you have better luck with latency than I have had over the years. I have never been able to permanently get zero noticeable latency when using my keyboard with BIAB and a soft synthesizer. I have tried every possible ASIO/driver combination and fiddled with settings for hours and asked all kinds of question on this forum. I have often thought I have cracked the problem only for it to re-appear. This may not apply to you but the one latency issue I can never solve is when using the "pause PLAY until MIDI received" It is very hard to get this to work with no latency, which defeats the object of this feature.
This is why I switched to a hard synth (sound module) years ago which never has any latency issues of any kind. I haven't tried recently so things may be better but I love my sound module and have dozens of songs that use it's higher banks.
Well, Following Noel's advice, I have good news and I have bad news.....
First, the good news....the latency is gone.
The bad news.....all sounds generated from either the MIDI keyboard or BIAB's Big Piano are gone too. In other words, I can't get either to play. Before I could get sounds to play, but only about a 1/2 second after inputting them.
I have shutdown BIAB, and rebooted the PC and have the same result.
Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
As it looks like Noel also found out, sometimes a Reboot of the puter is all it takes. Windoze, y'know.
Other times, inside BB, A Return to Factory Settings can fix such as well. Why, I dunno, but it has worked before here.
--Mac
Oohhh.....I don't know if I'm willing to do a return to factory settings after finally getting the Hi-Q sounds issue sorted out.....
Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
I hope you have better luck with latency than I have had over the years. I have never been able to permanently get zero noticeable latency when using my keyboard with BIAB and a soft synthesizer. I have tried every possible ASIO/driver combination and fiddled with settings for hours and asked all kinds of question on this forum. I have often thought I have cracked the problem only for it to re-appear. This may not apply to you but the one latency issue I can never solve is when using the "pause PLAY until MIDI received" It is very hard to get this to work with no latency, which defeats the object of this feature.
This is why I switched to a hard synth (sound module) years ago which never has any latency issues of any kind. I haven't tried recently so things may be better but I love my sound module and have dozens of songs that use it's higher banks.
Tony
Well, that's not good news, Tony.
Could you elaborate about the hardware synth (sound module) that you're using?
I know NOTHING about them. How does it get hooked/configured to the digital piano and computer?
Thanks.
Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
At the moment, your system is not set to reproduce sounds using VST/DXi (e.g. Sampletank, CoyoteWT, etc). That's what those two checkboxes #7 (in the image above do).
So now that we're getting somewhere, activated the two checkboxes I've labelled as #7.
Now click on the dropbox immediately below #7 and set the softsynth to CoyoteWT (you can see that mine is set to Cakewalk-TTS1). Exit and restart BIAB. (No need to restart the computer.)
At the moment, your system is not set to reproduce sounds using VST/DXi (e.g. Sampletank, CoyoteWT, etc). That's what those two checkboxes #7 (in the image above do).
So now that we're getting somewhere, activated the two checkboxes I've labelled as #7.
Now click on the dropbox immediately below #7 and set the softsynth to CoyoteWT (you can see that mine is set to Cakewalk-TTS1). Exit and restart BIAB. (No need to restart the computer.)
See if you still have low latency.
I did as you suggested, Noel. And for about 5-10 seconds, it was working fine - very low latency. Then suddenly, the latency jumped to about 5 seconds, and it remains there! (That is not a typo....)
Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
Boy do I remember going through this problem! That held me up for YEARS. I was never able to get BIAB to work without noticeable latency. Ten someone in the forum suggested I needed to obtain a audio interface. I got the avid fasttrack from Sweetwater and had NO ORE problems with latency since. Have moved up to the fastrack Pro and love it. Of course I also got into ProTools and Sonar at the same time. Good luck. I will be watching your progress with real interest.
Dell 610 dual Monitor, win 7-10, Sonar Plat, ProTools 10 & 11, Reaper 4, BIAB/real Band 2022, Easy Drummer, Superior Drummer, Kontact Essentials, Personnel Orchestra, Korg Legacy Analog & Digital
Is it possible for you to use the Snipping Tool to capture and image of your "MIDI Driver" setup? Once you've captured it, you can save it as a jpg.
Once you have a jpg, you can then attach it to a forum post by ...
1. Switching to "Full Reply Screen" (next to the "preview reply" button>
2. Using "File Manager" that I've highlighted below.
It would help a great deal if I can see your settings.
Regards, Noel
Been away from the computer for a time. Noel. I will work on getting a jpg posted here using the advice that you (I believe it was you...) provided in theother thread about Hi-Q files. I'm not sure what the "snipping tool" is or how it works, but I think that I'll manage to get a jpg posted otherwise. If not, I'll be back with questions about that.
I'll get the jpg posted here later today.
Thanks.
Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
When you have that window displaying the way you want it just hit your Print Screen button on your PC keyboard. That captures every pixel on your monitor and puts it in your clipboard.
Open Microsoft Paint (in Start>All Programs>Accessories and paste it in by hitting Ctrl V. If you want to crop it so just that window shows, there's tools in Paint to do that.
Then do a Save As and save it as a gif or jpeg file. Save it anywhere you want and then in the Forum File Manager browse to that pic and post it here.
The only odd thing about this is when you hit the Preview Reply button that image doesn't show up so you can't see exactly what it looks like until you actually post it but if you followed these directions the image will be there.
Thanks for the explanation, Bob. I'll getting to it in a few minutes.
Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
Is it possible for you to use the Snipping Tool to capture and image of your "MIDI Driver" setup? Once you've captured it, you can save it as a jpg.
Once you have a jpg, you can then attach it to a forum post by ...
1. Switching to "Full Reply Screen" (next to the "preview reply" button>
2. Using "File Manager" that I've highlighted below.
It would help a great deal if I can see your settings.
Regards, Noel
Here are my current MIDI Settings, Noel.
For some reason, the latency is greatly reduced today,but it's still perhaps 1/2 second.
Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
Newbert, what interface do you use to process through?
Robh -- I'm a newbie to this stuff and don't understand the question. My DGX640 Digital Piano is connected to my laptop by a USB-MIDI cable, if that's what you mean....
Kawai VPC1 MIDI Controller; Asus A53E Laptop running Windows 7 - 64 bit; BIAB 2017 UltraPlusPak (upgraded from 2014 EverythingPak), running from Laptop's Hard Drive.
XPro & Xtra Styles PAK Sets On Sale Now - Until May 15, 2026!
All of our XPro Styles PAKs and Xtra Styles PAKs are on sale until May 15th, 2026!
It's the perfect time to expand your Band-in-a-Box® style library with XPro and Xtra Styles PAKs. These additional styles for Band-in-a-Box® offer a wide range of genres designed to fit seamlessly into your projects. Each style is professionally arranged and mixed, helping enhance your songs while saving you time.
What are XPro Styles and Xtra Styles PAKs?
XPro Styles PAKs are styles that work with any version (Pro, MegaPAK, UltraPAK, UltraPAK+, or Audiophile Edition) of Band-in-a-Box® 2025 (or higher). XPro Styles PAKS 1-10 includes 1,000 styles!
Xtra Styles PAKs are styles that work with the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box® 2025 (or higher). Xtra Styles PAKs 1-21 includes 3,700 styles (and 35 MIDI styles)!
The XPro & Xtra Styles PAKs are not included in any Band-in-a-Box® package.
The XPro Styles PAKs 1-10 are available for only $29 ea (reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Listen to demos and order now! For Mac or for Windows.
The Xtra Styles PAKs 1-21 are available for only $29 ea (reg. $49 ea), or get them all in the Xtra Styles PAK Bundle for only $199 (reg. $349)! Listen to demos and order now! For Mac or for Windows.
Note: XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 19 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version as they require the RealTracks included in the UltraPAK, UltraPAK+, or Audiophile Edition.
Supercharge your Band-in-a-Box today with XPro Styles PAKs and Xtra Styles PAK Sets!
With the release of Band-in-a-Box® 2026 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll keep this forum post updated so you can easily find all the latest videos in one convenient spot.
Whether you're exploring new features, checking out the latest RealTracks or Style PAKs, this is your go-to guide for Band-in-a-Box® 2026.
Band-in-a-Box® 2026 for Mac is here and it is packed with major new features! There’s a new modern look, a GUI redesign to all areas of the program including toolbars, windows, workflow and more. There’s a Multi-view layout for organizing multiple windows. A standout addition is the powerful AI-Notes feature, which uses AI neural-net technology to transcribe polyphonic audio into MIDI—entire mixes or individual instruments—making it easy to study, view, and play parts from any song. And that’s just the beginning—there are over 100 new features in this exciting release.
Along with version 2026, we've released an incredible lineup of new content! There's 202 new RealTracks, brand-new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two new RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Special Offers
Upgrade to Band-in-a-Box® 2026 for Mac and save up to 50% on most upgrade packages during our special offer—available until May 15, 2026. Visit our Band-in-a-Box® packages page to explore all available upgrade options.
2026 Free Bonus PAK & 49-PAK Add-ons
Our Free Bonus PAK and 49-PAK are loaded with amazing add-ons! The Free Bonus PAK is included with most Band-in-a-Box® 2026 for Mac packages, but you can unlock even more—including 20 unreleased RealTracks—by upgrading to the 2026 49-PAK for just $49.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.