|
Log in to post
|
Print Thread |
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
Hi ALL.
It's been a long time since I have posted here, but do stop by often to read the new posts and try to keep up on whats new. But have a new prob that I need help with again. Well, guess you could say "an old prob again" as back when I fisrt started to use PTPA. Just built a new computer and installed my PTPA 11 and Audiophile 2496 card but cant get them working together. I know it's in the settings but have tried every option I can think of and find, and still no luck. Everything checks out fine in device manager. Just dont remember how it was all configured on my old computer to be able to duplicate the settings. To give you a run down on the new system....Gigabyte GA-P35-DS3L mobo 1066 FSB, Intel Q6600 quad core 2.4 Ghz processor, 4 gigs (2x2 GB) Kingston P2-8500 DDR2 ram at 1066 Mhz, 2x Seagate 500 GB 32 MB cache SATA-II HDD's, 2x Lite-on SATA DVD/RW's, ATI Radeon 9000 video driving dual monitors, M-Audio Audiophile 2496 soundcard running Windows XP professional SP-3. I have also downloaded ASIO4ALL onto this machine, and no luck running it also.
Can't even get any audio input indication on VU meters in PTPA nor the 2496 control panel. I am using a Yamaha PSR-550 keyboard both audio and or midi to the 2496 card. So here I am Lost Again, LOL!!
And as always, help is much appreciated !!
Thanks,
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Nothing on the 2496 panel? Are input channels muted? Does it show up as an input/output driver anywhere?
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
DoubleClick the Delta icon in the taskbar by the clock.
Hit the Patchbay/Router tab up top.
Then select "Monitor Mix" under the Hardware 1/2 column.
Now hit the Monitor Mixer tab and make sure that Stereo Link is selected in all fader columns and that none are muted.
Turn the Master Faders all the way up.
Turn WaveOut 1/2 Faders all the way up.
Turn Hardware 1/2 Faders all the way up.
Hit the Hardware Settings Tab.
Set Master Clock to Internal XTAL.
Set codec sample rate to 44.1 -- BUT -- do not check the two options below, "Rate Locked" or "Reset Rate when Idle" -- leave them unchecked.
Multitrack Driver Devices should be set to "Single and In Sync".
DMA buffer size is a trial and error situation, finding the lowest buffer before pops and clicks in the audio occur, start with 256. Mine is set to 128, which is a good tradeoff between fast speed and low latency and where the pops and clicks occur on this machine. Yours may differ, not a kill.
Leave the thing under ASIO Options UNchecked.
No checks in Input Channel Phase either.
Do all the above with any host programs completely closed down, then open the host and visit the Audio preferences, select the physical hardware ports for ASIO audio input and output. Also check off "ASIO Always On" in pgmusic products. Just leave the quality setting at Good or Better. Best doesn't seem to make much difference actually here.
Good luck,
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
Hi Silvertones
The only 2 mixer inputs that are muted are the WavOut S/PDIF an H/W In S/PDIF (which I am not using S/PDIF) and the others including Master Volume are all set to Stereo Link and Solo with gains all the way up. Audio drivers are set to Audio Input--M-Audio Delta AP 1/2....Audio Output--M-Audio Delta AP 1/2. Also using MME at this time in PTPA.
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Check that all important "Monitor Mix" checkbox.
Matter of fact, go down my entire checklist, I took it from my setup which works fine with pgmusic programs daily, XP SP3 and the Delta drivers are version 5.10.00.5057
I'm intentionally using an older driver version because the latest and greatest with the eye candy does not function properly on the Consumer/Pro level settings. Contacted M-Audio directly and they had no want to fix that, simply telling me to revert back to the older drivers. So I did.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
Hi Mac !
Again thanks for the help! Call me dense but have 1 more question. You said to "do the above with any host progs completely closed down. OK, Whats a host program? Did you mean with PTPA closed down?
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Yes, PTPA is a host program, as would be any music program that must address the soundcard. Close them all and then adjust the Delta Control Panel settings.
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
Mac,
I closed the app and went thru all your settings and still have no VU indication on neither Delta panel nor PTPA's VU's
However I can hear my PSR-550 just fine coming thru the 2496 output.
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Try resetting PTPA to factory: Quote:
89. How can I return PowerTracks Pro Audio to the factory settings?
PowerTracks Pro Audio 11 uses the files listed below for configuration. If you want to restore PowerTracks to the factory settings, you can delete or rename these files. The next time you launch PowerTracks, new configuration files will be created. This can help solve or troubleshoot odd and unexplainable problems you are having with the program. The files are found in the root PowerTracks folder, usually C:\pt. Important: You must have PowerTracks closed when you do this.
We recommend renaming the files (rather than deleting them) or saving a copy of them somewhere else on your hard drive so that you have a backup of your old configuration. For example, you could rename ptw.ini to ptw.old. Later, if you find that you need to restore your previous settings, you can delete the new ptw.ini file that PowerTracks will have created, and rename ptw.old to ptw.ini
Note: Some people have trouble finding the files because Windows hides file extensions. In any folder on your computer, go to the Tools menu and click on Folder Options, then click on the View tab and make sure 'Hide extensions for known file types' is unchecked. On Windows 98/ME, the Folder Options item is found under the View menu.
ptw.ini. This file contains most of the global PowerTracks settings, especially the settings in the Options | Preferences and Options | MIDI Devices dialogs. It also has a list of the most recently accessed song files.
ptpa.cfg. This file contains information about your sound card
The two files above contain most of your program settings; it is usually only necessary to delete those two files.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Aug 2006
Posts: 8,691
Veteran
|
|
Veteran
Joined: Aug 2006
Posts: 8,691 |
Mac why do you use Mon Mix, rather than the other option?
HP Win 11 12 gig ram, Mac mini Sonoma with 16 gig of ram, BiaB/RB 2026, Reaper 7, Harrison Mixbus 11 , Presonus Audiobox USB96
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Quote:
Mac why do you use Mon Mix, rather than the other option?
Because the Delta cards have a built in hardware monitor mixer. Zero latency. Plus, it acts like the "What U Hear" setting on a Creative card, allowing the recording of anything the puter is playing back on the wav bus.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
OK Mac,
Reset PTPA to factory settings per the inst. you included in your last post to me by re-naming the ptw.ini file and the PTPA.conf file and re-started comp. and re-opened PTPA.
Then went thru all your previous settings as before. Now when I play on my keyboard I still hear it fine on the 2496 cards output and now can also see the notes as I play them
on PTPA's on screen keyboard (which before did not show).
But....Still no VU indication on PTPA's VU's and still none on
2496's mixer control panel screen.
Hmmmm!?!?
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
What are you attempting to use for the MIDI output synth?
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
I have the Re-Route MIDI playback to default Dxi Synth ticked and Default DXi Synth set to VSC DXi.
Larry
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Read my next entry for how to get it to work.
--Mac
Last edited by Mac; 05/13/09 04:43 PM.
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
I just unhooked all my MIDI output hardware, opened up a copy of PT 11 and duplicated your situation here.
Got it so that the VSC was selected, but could only see the notes on the MIDI keyboard as I played, but could hear nothing.
Here's how I got it to work for me:
Options -> MIDI Devices and checked Rerout to DXi, then made sure VSC DXi was selected in the dropdown window.
Preferences -< Audio and made sure that "Enable Input Monitoring" is checked on the RH top of the window. Then selected ASIO drivers (M-Audio Delta ASIO).
Be sure to check, "ASIO always on" while in that window.
HIt Okay and you should be able to play the VSC DXi in realtime and hear it while the onboard piano keys indicate which keys you are playing. Hit the VU meter icon and you should see activity on BOTH the Input and Output side as you play.
Select the first available track in Tracks View, then RightClick below the trackname area, select "DXi synth 1". Leave the track selected (number turns red).
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
PowerTracks Pro Audio
|
Joined: Jul 2007
Posts: 59
Enthusiast
|
|
OP
Enthusiast
Joined: Jul 2007
Posts: 59 |
Hey Mac---"You Da Man !!" Again!
That did it !!
All seems to work like it should again!
I want to THANK YOU for going the extra mile and to all that work to figure out what was going on with my set-up.
Now I'm sure I am going to like this new machine much more so than my old comp. which was so not made to do this kind of work. PTPA and BIAB was really struggling on the old comp.(97% CPU usage) So far have not seen cpu go over 8 or 9% yet, but haven't really tried to do much yet with it. I'm sure it will go up as I get into some real projects.
Thanks Again, Mac.
Larry
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Watch the video.
You can see all the 2026 videos on our forum!
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Watch the video.
You can see all the 2026 videos on our forum!
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
- MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
- MIDI SuperTracks Set 46: Piano & Organ
- Instrumental Studies Set 24: Groovin' Blues Soloing
- Artist Performance Set 19: Songs with Vocals 9
- Playable RealTracks Set 5
- RealDrums Stems Set 9: Cool Brushes
- SynthMaster Sounds Set 1 (with audio demos)
- Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
- MIDI SuperTracks Set 47: More SynthMaster
- Instrumental Studies 25 - Soul Jazz Guitar Soloing
- Artist Performance Set 20: Songs with Vocals 10
- RealDrums Stems Set 10: Groovin' Sticks
- SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Learn more about the Bonus PAKs for Band-in-a-Box® 2026 for Windows®!
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics85,738
Posts795,565
Members39,945
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean