I do not own Band in a Box yet. This question will determine if it will fit my needs. I want to make backing tracks to play my saxophone with. I have a PC and a Ipad. The PC is not in a location I could practice my sax at. Right now I use my Ipad to play karaoke mp3's I download from ITunes, hooked to a Bluetooth boom box, to practice with at another location. Is it possible to export what ever sound file the Band in a Box produces, to a stand alone file the Ipad could play the same way I use mp3's now? Thanks. I can't stand in front of my PC and play and I don't want to by a PC laptop.
Adding to what Ian has said above, here are the relevant options found under the "File" menu ...
Hope this helps, Noel
Noel Not at my PC now but isnt the Native mp3 bitrate a bit on the low side? Can you take a peek and see what it is please? Ta Ian PS noel, our son and family have now emigrated to your fair country and live in Penrith, Sydney
Last edited by sixchannel; 03/01/1403:09 PM.
Old Guys Rule.The older I get,the better I was! BB2023 ULTRA, 1013, Win 7 and 10
I know that some people have said that MP3s do not save at high quality. That has never been the case for me. The process that the MP3 export option takes me through is below.
1. A dialogue box opens that prompts me for a file name.
2. BIAB then creates a temporary WAV file and, then when that's done, another option box pops up that prompts for setting the required MP3 quality.
(The red circle on the image below is an arrowhead. Clicking on this will cause a dropdown menu to appear that makes available all encoding options.)
I set this to 192 or 160 kBit/s and 44,100 Hz (#2 on the image).
Also, I leave the "Name" (#3) as [untitled] since I have already created the name for the audio file in the very first step.
This works for me.
Regards, Noel
P.S. Ian, I reckon that Sydney has one of the best climates going in Australia. How is your son finding his new home?
I do not own Band in a Box yet. This question will determine if it will fit my needs. I want to make backing tracks to play my saxophone with. I have a PC and a Ipad. The PC is not in a location I could practice my sax at. Right now I use my Ipad to play karaoke mp3's I download from ITunes, hooked to a Bluetooth boom box, to practice with at another location. Is it possible to export what ever sound file the Band in a Box produces, to a stand alone file the Ipad could play the same way I use mp3's now? Thanks. I can't stand in front of my
PC and play and I don't want to by a PC laptop.
Yes, yes, and yes.
Plus there is also the option to use BB2GO on the iPad, which can communicate with the PC from the iPad and load songs if it is online and on the internet.
You also have the famous PGMusic "30 day No Questions Asked" return policy, which is like getting a full featured demo that saves songs for 30 days. If you don't like what you get, which is highly unlikely, you can return the thing on the 30th day for a full refund. What's to lose?
I have this editor and love it. I export all my songs as waves and open them in Wavepad. There, I trim the silence and count in, as well as convert it to MP3. It has all the major bit rates topping out at 320kbs on down.
I reduce from 320kbs only if the file is too large for the server I plan to upload it to. I often use box.com when the file won't fit into the other server I use that has a 10mb file limit.
You can find my music at: www.herbhartley.com Add nothing that adds nothing to the music. You can make excuses or you can make progress but not both.
The magic you are looking for is in the work you are avoiding.
So I did it again just now and no joy. BIAB does not see those files even after a complete reboot. Is there someplace in BIAB I need to set it to look for the LAME installed codec?
There is a 'how to install' txt file in the package, follow it exactly including moving files to C:\Lame.
Copy all the extracted files to a new empty folder called C:\Lame in order for the following command lines to work. THIS IS IMPORTANT.
Now, in your Command prompt (running with admin rights) insert the following and copy/paste it to be exact. You have to right-click to paste into a Command prompt.
cd %windir%\SysWOW64
Hit Enter Command prompt should change directories
Then copy/paste rundll32 setupapi.dll,InstallHinfSection DefaultInstall 0 C:\lame\LameACM.inf
As you can see it installs as it's own codec this way, as evidenced by my WMP codec list below. This list is accessed by clicking Help-About WinMediaPlayer, then clicking the Technical Support text at the bottom in recent versions.
Below is Fruanhofer, Windows and Lame all running side by side.
I do not work here, but the benefits are still awesome Make your sound your own!
That looks crazy. I have been using the LAME codac for years on XP and win 7 and now win 8, and never seen such an install requirement. Not meaning to shoot the messenger, I'm sure this is all valid. I am just wondering why I have never had to jump through these hoops in the past. Honestly, I didn't even know what I was missing in BIAB rendering to mp3 - since it just always worked with my single option. I actually don't even use BIAB for this purpose since I render to mp3 from Reaper, and that appears to have all the options for LAME.
While I am not afraid of following the instructions, since I can just blame you if anything goes bad, but I don't think I am going to pursue fixing what ain't broke.
As far as I can tell from your image, you have those options. There's a little dropdown arrow on the far right of text line called "Attributes". It's to the immediate right of "6Kb/sec". Have you tried left-clicking your mouse on that?
As far as I can tell from your image, you have those options. There's a little dropdown arrow on the far right of text line called "Attributes". It's to the immediate right of "6Kb/sec". Have you tried left-clicking your mouse on that?
Regards, Noel
Noel, If I told you I had never clicked the little dropdown arrow, I am sure you and everyone reading would lose all respect for me! So let me assure you all, yes I did and no there are no other options available. But it don't hurt to ask, thanks.
56k is the highest MP3 export rate with the basic windows install. It is what it is.
To my knowledge, the true LAME codec comes with command line functions only. Anything other than that it is someone else adding compatibility. This command line method I described (run once) installs LAME onto windoze itself so your other programs can use it.
Take it or leave it. This method lets RB/PT/BB see it. If you don't need it, don't bother. For those who do, it's there. I used to be able to right-click the INF file and install it, but that didn't work today, so I thought I'd post another way.
Just tryin' to help. But yeah, it's probably my fault if anything goes wrong.
I do not work here, but the benefits are still awesome Make your sound your own!
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
So let me assure you all, yes I did and no there are no other options available. 
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean