|
Log in to post
|
Print Thread |
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 26,888
Veteran
|
Veteran
Joined: Jul 2000
Posts: 26,888 |
And don't forget the required razor blades and splicing tape.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
And don't forget the required razor blades and splicing tape. Absolutely. Along with the black wax pencil for marking the spot exactly over the head gap. And the agony of finding out that the splice needed to be just slightly a bit more up or downstream, which could KILL a project at its worst. There was no "Undo" --Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2013
Posts: 1,319
Expert
|
|
Expert
Joined: Jan 2013
Posts: 1,319 |
AIIGGHHHH! To own one, you MUST be able to MAINTAIN one. the maintenance was near continuous.
Oh yes....the never ending maintenance. Even being the 'sweet machine' that it is I'd never go back to the analogue world. I used a Tascam 3440S (purchased 1979) for 20 years and added a Fostex Model 8 in the late 80's. I retired them both and sold them back in 1999-2000. The 'maintenance' involved, which I accepted during those decades, was perpetual and (IMO) must be done diligently after each session. I'll stay right here in the digital world 'thank you very much'. BTW....I went from Sonar 5.0 to X2 and users know the GUI angst in getting used to the new paradigm. If I could get through the vertical learning curve and up to snuff anybody can. Carry on...
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Apr 2010
Posts: 5,139
Veteran
|
|
Veteran
Joined: Apr 2010
Posts: 5,139 |
I really do miss the sound of a VU pushing into the red though.  My old manager is sending me a studio master we recorded at WHYY in Philly back in '68. It'll be interesting to see if it's still playable (might have to shake & bake it) after 46 years. 
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
There's some rather good Impulse Response algos for plugins that can turn in a fairly fine job of turning the digitially recorded track into sounding very much like the saturation magic of the analog tape deck.
Can make that analog tape saturated guit track happen inside the digital DAW, but be forewarned that the same tends to give a sound that many today would find to be "dated" - push those algos too hard and whatever you've played can take on the aspect of the dreaded "Hair Bands". On the other hand, the old Bruce Richardson tape sim algo could work very well on a Frank Zappa-esque solo guit track IMO.
There is a big caveat to all this, though, and it is that while spending time trying to duplicate the sound of an older technology with the stuff of a newer one - we may miss the boat on developing new things that are very likely to become the treasured sounds of a generation that has heard none else.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2013
Posts: 1,319
Expert
|
|
Expert
Joined: Jan 2013
Posts: 1,319 |
My old manager is sending me a studio master we recorded at WHYY in Philly back in '68. It'll be interesting to see if it's still playable (might have to shake & bake it) after 46 years. Holy shvtsky...I hope the tape is still in tact and you get to listen without issues after all these years. I have had a couple of aged original work cassettes that squealed horrifically and were not salvageable. Keep us informed. I have a cassette of us (Ambush Band 1976-79) playing live for an hour at the Foothill College radio station KFJC in March of '77. In 2000 I listened to it (they could have done a better job of recording) and immediately got it into the DAW and salvaged it on to a CD....whew. Mac...I have not used a tape sim plug yet and I do have a couple. Guess I should do some listening comparisons for my own knowledge. Carry on....
Last edited by chulaivet1966; 02/17/14 08:15 AM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 26,888
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 26,888 |
I still have my old 4-track Teac reel-to-reel deck with sound-on-sound and 10 inch reels, and I have aspirations of dumping my tapes to digital at some point. Just a few years ago, I took an album master from 1983 and was able to get that off, no problem. Some of my reels date from the late 1960s, and those may be more of a challenge. The local studio bakes those old ones a bit before making the dump.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2013
Posts: 1,319
Expert
|
|
Expert
Joined: Jan 2013
Posts: 1,319 |
I still have my old 4-track Teac reel-to-reel deck with sound-on-sound and 10 inch reels, and I have aspirations of dumping my tapes to digital at some point. Just a few years ago, I took an album master from 1983 and was able to get that off, no problem. Some of my reels date from the late 1960s, and those may be more of a challenge. The local studio bakes those old ones a bit before making the dump.
Hmmm...you may have the Teac 2340 which IIRC was the 'sound on sound' era and one could record (2) tracks simultaneously. BOLD: Matt...get that done with as of yesterday! My story: Before I could retire BOTH analogue decks I faced the same challenge. I had (24) R/R tapes with all original material dating from 1979. The older stuff was at 7 1/2 and the later material at 15ips. It was hell because I only had the Gina20 DAW interface at the time being 2in - 8out. It was a total time vampire over a couple of months...it was hell. Good luck....
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Aug 2011
Posts: 10,752
Veteran
|
|
Veteran
Joined: Aug 2011
Posts: 10,752 |
Or it could have been a Teac 3340 or 3340S. I don't know if it was Matt or someone else but a few days ago someone on the forum mentioned using a 3340.
Jim Fogle - 2025 BiaB (Build 1128) RB (Build 5) - Ultra+ PAK DAWs: Cakewalk by BandLab (CbB) - Standalone: Zoom MRS-8 Laptop: i3 Win 10, 8GB ram 500GB HDD Desktop: i7 Win 11, 12GB ram 256GB SSD, 4 TB HDD Music at: https://fogle622.wix.com/fogle622-audio-home
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jul 2000
Posts: 26,888
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 26,888 |
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2013
Posts: 1,319
Expert
|
|
Expert
Joined: Jan 2013
Posts: 1,319 |
Got it....I forgot about that series. Teac made some great recording workhorses, without a doubt. I got so much use out of both of mine they'd paid for them selves ten fold. Later....
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 22,126
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,126 |
... Just a few years ago, I took an album master from 1983 and was able to get that off, no problem. Some of my reels date from the late 1960s, and those may be more of a challenge. ...
1983 .. I am impressed Tapes from the 60's?? Wow, I'd be amazed if they are salvageable. 15-20 years max is about the best I ever got from 1/4". Everything I had on 1/4" from the 80's was shot by about 2006. They just sat for a lot of years. Not like they wore out!
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2013
Posts: 49
Enthusiast
|
|
Enthusiast
Joined: Jan 2013
Posts: 49 |
Would RealBand, with some developed mastery, output good enough quality to submit to BroadJam?
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jun 2012
Posts: 20,233
Veteran
|
|
OP
Veteran
Joined: Jun 2012
Posts: 20,233 |
Would RealBand, with some developed mastery, output good enough quality to submit to BroadJam? Hi Joey There should be no reason that the quality would not be adequate. Real Band is essentially a fully functional DAW complete with mixing and effect capabilities. Other DAW's may have different feature sets, but Real Band can certainly cut this task. Regards Trevor
BIAB & RB2025 Win.(Audiophile), Sonar Platinum, Cakewalk by Bandlab, Izotope Prod.Bundle, Roland RD-1000, Synthogy Ivory, Kontakt, Focusrite 18i20, KetronSD2, NS40M Monitors, Pioneer Active Monitors, AKG K271 Studio H'phones
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Dec 2003
Posts: 22,818
Veteran
|
Veteran
Joined: Dec 2003
Posts: 22,818 |
When using the identical tracks, effects, sound sources and sound card all DAWS will sound exactly the same. As Trevor pointed out the difference in DAWs are the feature sets. Some have better VSTis and VSTi capabilities, some better effects some come with better sound sources and etc.
So the answer to your question is yes RealBand is good enough.
When you are at the checkout line and they ask if you found everything say "Why, are you hiding stuff?"
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2013
Posts: 49
Enthusiast
|
|
Enthusiast
Joined: Jan 2013
Posts: 49 |
Thanks guys for the info. I'll keep trying to learn RealBand.
Last edited by Joey the Flute Guy; 04/01/14 10:03 PM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Would RealBand, with some developed mastery, output good enough quality to submit to BroadJam? The RealBand program is capable of World Class results in pcm digital multitracked audio. --Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2013
Posts: 49
Enthusiast
|
|
Enthusiast
Joined: Jan 2013
Posts: 49 |
I noticed no one has mentioned Pro Tools in the discussion. I bought a copy about a year or so ago but, got turned off with the copy protection hoops I had to go through and then, the program it's self makes no sense to me and seems too complex at this stage of life. I'm old and there is to much terminology I don't know. Customer service appears to be geared toward the schooled engineer level. I'd like to sell it and move on with RB but, they probably have some prohibition against that?
Thanks for the info Mac. I've learned alot. These forums are essential for guys like me.
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2002
Posts: 7,913
Veteran
|
|
Veteran
Joined: Jan 2002
Posts: 7,913 |
Joey, Avid's policy on selling of ProTools and so forth is detailed, although somewhat cryptically, here: http://avid.force.com/pkb/articles/FAQ/en363631It does not look like they encourage license transfers outside of the iLok environment. I was going to purchase a used M-Audio interface earlier this year, and because of Avid's relative lack of general customer service/technical service, for used products, I steered away from it. I think you will be able to find a buyer. One place to advertise is at the forums at www.kvraudio.com-Scott
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording, Mixing, Performance and Production
|
Joined: Jan 2013
Posts: 49
Enthusiast
|
|
Enthusiast
Joined: Jan 2013
Posts: 49 |
Hi Scott,
Avid says in the Transfer of ownership the following:
Pro Tools software registration (version 9.0 and above) is non-transferable. Avid does not transfer registered ownership of Pro Tools
standalone software to the new owner. Transfer of iLok authorizations by buyers and sellers can be done using the iLok license Manager.
Transfer of iLok licenses are between the individual parties and are in no way associated with Avid. Avid will only register and support
software purchased by the original owner, and only when purchased as new from an Authorized Avid Dealer.
I don't know that it means the software won't work for the new user. It might mean the new owner won't be able to get an upgrade. I'll have to contact them. I remember it to be very irritating, annoying and frustrating jumping through the iLok hoops. I would not have purchased it if I knew I would have to go through this.
Thanks
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Holiday Weekend Hours
Our Customer Service hours this weekend are as follows:
Friday, April 18: 8:00 - 4:00
Saturday, April 19: closed
Sunday, April 20: closed
Monday, April 21: Regular hours
Thank you!
Band-in-a-Box 2025 French Version is Here!
Bonjour à tous,
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
BIAB 2025 - francisation
RealBand 2025 - francisation
Voilà, enjoy!
Band-in-a-Box 2025 German Version is Here!
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Stay up to date—get the latest update now!
Update to RealBand® 2025 Build 5 Windows Today!
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
Get the latest update today!
PowerTracks Pro Audio 2025 for Windows is Here!
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
www.pgmusic.com/powertracks.htm
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
Band-in-a-Box® for iOS® :Summary video.
Check out the forum post for more information.
|
|
|
|
|
|
|
|
|
|
|
|
Forums58
Topics83,913
Posts772,159
Members39,484
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean