Thanks for your help Rob...

But you'll have to forgive me... my mixer is a different model than the one you had albeit it's probably the same setup as yours. I'm not sure what inputs you're using because I can't see the writing that's behind the input cords that are plugged in. You have to know that this is all VERY new to me... but I'll eventually learn. Maybe you could actually tell me what inputs you used for your setup by name?

The way I understand it from Gary is: My Ketron SD2 goes into a stero channel. The CD/Tape output goes into my Audigy card's Aux 2 input. I record using the Aux input. Up to this point it works well for me. But here's where I'm having trouble; the output from my sound card goes into the CD/Tape input. When I do this the CD/Tape to control has to be pressed to hear my recorded audio tracks. When this is done I can't hear the mic through the mixer. When I press the CD/Tape to control button again I can hear the mic but not the recorded audio. It has to be something that I'm doing wrong. Like I said... any help at all would be greatly appreciated.

Bobby

https://soundcloud.com/bobby-t-394727974