Hello, First, sorry if this post is misplaced, but I don't know where to find some efficient help. I've changed my computer for a brand new tower with a Intel i5 4670k processor, a MB ASUSTeK COMPUTER INC. Z87-A, Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller and NVIDIA Corporation GK104 HDMI Audio Controller. I have Win 8.1 64 bits. And a Edirol FA-66 external (firewire, which is OK too) soundcard, which looks to be correctly installed, ready to work but ... it doesn't! I've tried the 2 drivers from the Roland website, the Vista drivres (I've read someone had made it running with it, but not for me), no midi signal (in the RealBand monitor or in MidiOx). My master keyboard is OK: it sends messages to my two EMU ESI 4000 without any problem. The cable is OK (I've tested it). I've written for some help to Roland without any response. Could someone help me? I was researcher in ... computers but it doesn't help! Thanks a lot because my PG Music softwares have less interest without this midi connection. Awaiting for my savior!!! Best regards. François from Normandy.
Is this driver selected as the MIDI input device in BiaB or RB (whichever you are using)? Is it in the list of available MIDI input devices? The software must be told to use it.
Last edited by rharv; 11/09/1407:11 AM.
I do not work here, but the benefits are still awesome Make your sound your own!
Hello, Yes, of course. It seems that I have the same problem with audio: I've plugged a bass in my Edirol and I can see the signal on the FA-66 (yellow led), in the windows sound panel (Audio record in BIAB, test level and the Edirol line in 1 with a kind of vu-meter on the right of the window shows activity when I play) but nothing in the "dedicated" BIAB vu-meter (no green light). It seems that I encounter a problem between my soundcard and BIAB. I've let Windows choosing running parameters for BIAB and it runs as compliant for Vista. Is it right? Thanks a lot. François
Hello, Good advice. But not enough: I've changed some parameters and when I record audio + midi, I can hear (without direct monitoring, this has to be solved too) the recorded sound of my bass, but nothing coming from my master keyboard. Thanks for your help. François.
You use this one, forget about Windows wanting to run Biab under Vista or whatever it is. Also, this interface includes it's own ASIO 2.0 driver, you probably need that for audio and to control the latency but with your new computer the regular WDM drivers might be ok too. This is one of those things you can experiment with.
You select the Roland driver in the midi window inside Biab as already described and you select the ASIO driver in Biab's audio window. For now set the buffering at about 240. If you get playback glitches increase it. You need ASIO for direct monitoring but not for recording and regular playback.
Hello, I've changed MME for ASIO. I have uninstalled the Roland driver and re-installed it. Now, I can hear my bass even when not recording. If I use the "record audio & midi" function, all is OK for audio. I've lighten up my keyboard before launching BIAB. The Roland drivers are showing up in BIAB dialogs. I've unchecked all what concerning midi thru. And when I open the BIAB midi monitor, play my keyboard ... strictly nothing to view and to hear! I agree with you: it's surely a mistake somewhere in the configuration. But what? May you help me a lot more before i'll loose my last hairs? And the 2015 version will come. My first one was running on a Atari 1040 STF! Thanks for your help and patience. Best regards. François from Normandy.
Good, this is progress. Now, you didn't say what your keyboard is. Is it a newer controller with a USB connection to your computer? Or is it an older stage keyboard with regular DIN type midi connectors?
If it's USB then the keyboard should show up in the midi INPUT (on the left) window and you have to highlight it. If it doesn't show up there then it hasn't installed properly on your system. Then you have to set the keyboard's midi channel to match Biab's THRU instrument channel number. I think it's 4 but look it up if that doesn't work.
Hello, Sorry,my keyboard is a Fatar Studiologic SL-880 bought in 2000. And still working. It doesn't have any USB connection, only usual midi (DIN) plugs. So, I don't see it in my PC and it seems normal. Do you know a way to test my cables, with a multimeter, for example? There are only two possibilities: a bad transmission (I doubt a little with 2 cables) or a configuration problem concerning only the midi (the audio is OK now). I still don't know what to do! Below two screen copies of my configuration (the second is on page 2 of this post). Thanks for your help. Best regards. François
Last edited by FB; 11/12/1411:33 AM. Reason: little correction: I'm French!
1. Select the keyboard in the midi input window. Since your keyboard does not have it's own driver like a newer controller does, the keyboard has to be plugged into the midi ports on your FA-66 which you have selected. I see you already have ASIO selected as your audio driver.
2. A keyboard only works using the Thru instrument which is on the far right of the other regular instruments.
3. You must match the midi channel between the Biab Thru and your keyboard. Go to Opt>Pref>Channels and in that window you'll see what midi channel Biab uses for all the instruments. The Thru channel is 5. Set your keyboard to transmit on midi channel 5.
4. You keyboard is just a controller it has no sounds of it's own. Hover your mouse over the Thru instrument and you see an option to select a midi instrument patch from whatever midi synth you're using. If you have Sampletank installed along with the Biab HQ instruments you can use one of those patches.
Once all this is set up you should be able to play your keyboard and hear the sound. When you do that you will probably hear a delay or latency. If it bothers you, come back and ask about that. Handling latency is another discussion.
With the release of Band-in-a-Box® 2025 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll also keep this forum post updated so you can easily find all the latest videos in one convenient spot.
From overviews of new features and walkthroughs of the 202 new RealTracks, to highlights of XPro Styles PAK 8, Xtra Styles PAKs 18, the 2025 49-PAK, and in-depth tutorials — you’ll find everything you need to explore what’s new in Band-in-a-Box® 2025.
Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!
Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.
2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.
If you have any questions, feel free to connect with us directly—we’re here to help!
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
Band-in-a-Box 2025 für Windows Deutsch ist verfügbar!
Die deutsche Version Band-in-a-Box® 2025 für Windows ist ab sofort verfügbar!
Alle die bereits die englische Version von Band-in-a-Box und RealBand 2024 installiert haben, finden hier die Installationsdateien für das Sprachenupdate:
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean