Something all SD2 owners should be made aware of (forgive if you already know this) -- Cycling the power on-off switch on the SD2 forces a hardware Reset in the device, which will clear any rogue commands sent to the unit and put things back to "square one" or ready to receive again.

This can be a powerful troubleshooting tool in some instances, for you can rather quickly find out if the program is sending *anything* to the device that you don't want sent.

Turn the SD2 OFF, then wait about a slow count to 5 before turning it back on again. This will always clear the State Machine and boot it up in GM mode again.


--Mac