I am using BIAB and RealBand 2019, Windows 10 with a Behringer U-Phoria UMC202HD musical interface running to a mixing board.
I have used RealBand since the beginning now with no problems. Just finished a major many-months long musical project. On the very day when the final mix was to begin, RealBand stopped sending a stereo signal. It will not send to the right channel.
Every other program (audacity, computer, internet) - everything - sends a stereo signal to both speakers, to the interface and to the mixing board. Only RealBand will not do so.
I have checked every setting I can find. I have read the manual, looked at every post remotely related on the forums, applied all patches I can find and have updated every driver for everything. The only program not working is RealBand.
I am at a loss as to how to fix this and am under a lot of pressure, as (having been around the block a few times) I have multiple backups of everything, but they are all .SEQ files, so I am stuck.
I posted this to support last week and have not gotten a single reply. Need some serious help asap.
if all else fails why not buy PowerTracks at $49 which will run seq files. that will install fresh and should work fine. its much the same as RealBand but simpler. then rescue your tracks by exporting to wav and/or master/transfer to mp3 in a free program like audacity.
if PowerTracks doesn't work or you've rescued all your tracks, as long as its within 30 days you can get your money for PowerTracks back off PG Music under the 30 day refund deal. sneaky I know but an instant solution. PowerTracks will give you the same mixing ability as RB if your sq tracks are finished
I'm also assuming you save your seq files in a directory that will not be deleted by playing around with RB.
have you tried to reset RealBAnd to factory settings.......I think - and this is cut and pasted from an old thread.............
These are the two files you need to delete or rename. REALBAND.INI. This file contains most of the global RealBand settings, especially the settings in the Options | Preferences and Options | MIDI Devices dialogs. It also has a list of the most recently accessed song files.
RB.CFG. This file contains information about your sound card The two files above contain most of your program settings; it is usually only necessary to delete those two files.
Just rename the above mentioned files (better than deleting). Relaunch RB. It rebuilds those files again. Pay attention to any options along the way during install.
If it doesn't work you can delete the newly created files and rename the original files back to what they were. Then you would be back to where you are now.
I do not work here, but the benefits are still awesome Make your sound your own!
I'm interested to see how this pans out. I had the same problem a few weeks ago but was unable to resolve it properly, there's a short thread about it ten down from here. In my attempts to fix it I suspect I made things worse so I did a windows recovery. The problem went away but was not resolved. Hope you can get it sorted.
I checked all of that and the settings are good. No effects . . . reset it back to the original state. Also renamed the files and restarted. In short, everything that has been suggested so far.
I would think there would be some way to delete BIAB and REALBAND and do a completely fresh install (although that may not solve the issue) but I don't see anything that tells me how to do that (of course I might have missed it). I walked away from it in the evening, came back to it the next morning and the problem appeared out of nowhere, which makes me think it's most likely Microsoft messing with my system overnight via an update or something. Unfortunately I don't remember if it did an update or when.
I've contacted support several times, not a peep. Looks like it was a mistake to choose this program. Other than the total lack of support however, I love it.
FYI when I was trying to fix this; 1. Installed RB again over the existing version, no change. 2. Deleted existing version and made a fresh install, no change.
Under the current climate I wouldn't expect much from PGM support, but that aside, I have found their response to be somewhat patchy. I'm still waiting for help with an issue I raised in November 2019, but received great help when I had difficulty logging into the forum after the Windows Recovery.
You'll probably get good advice from the resident gurus on this forum.
Thanks to everybody who responded. The following might help somebody in the future . . .
I did a Windows RESTORE. This takes the operating system back to a point in the past, before updates, etc. When this is done, Windows 10 gives an information screen regarding what will be affected by going back to that point in the past. Guess what was affected . . . BIAB, RealBand and RealTek drivers.
Long story short - did the restore, everything worked as it did before. Got the final mix, made 3 redundant backups and the saga ends.
PowerTracks 2026 is here—bringing powerful new enhancements designed to make your production workflow faster, smoother, and more intuitive than ever.
The enhanced Mixer now shows Track Type and Instrument icons for instant track recognition, while a new grid option simplifies editing views. Non-floating windows adopt a modern title bar style, replacing the legacy blue bar.
The Master Volume is now applied at the end of the audio chain for consistent levels and full-signal master effects.
Tablature now includes a “Save bends when saving XML” option for improved compatibility with PG Music tools. Plus, you can instantly match all track heights with a simple Ctrl-release after resizing, and Add2 chords from MGU/SGU files are now fully supported... and more!
Get started today—first-time packages start at just $49.
Already using PowerTracks Pro Audio? Upgrade for as little as $29 and enjoy the latest improvements!
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean