|
Log in to post
|
Print Thread |
|
|
|
|
|
RealBand
|
Joined: May 2004
Posts: 92
Enthusiast
|
OP
Enthusiast
Joined: May 2004
Posts: 92 |
HP Pavilion Elite e9250t
Windows 7 home premium 64 bit
Focusrite Saffire Pro 24 DSP firewire interface
SIIG firewire card
Realband 2010
All of my saffire inputs and outputs appear in realband asio driver inputs and outputs. I select SPDIF input, open the vu meter to set my recording level and get a flashing realband message to enable my record input. Here is my problem, windows 7 record mixer only shows my saffire mic input and has set this as the default. My web searching came up with one repeated solution. Right click on an empty area in the win 7 record window and put checkmarks in the boxes labled "show disabled devices" and "show disconnected devices." This does nothing for me. Also, the configure, set default, properties, and apply boxes in this window are greyed out. Device manager shows my device working properly. Saffire playback is fine. I have disabled onboard realtek sound in the bios. Can someone help me to get win 7 to show all of my inputs in the record mixer window? Thanks..Bobby
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,167
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,167 |
Inside RB, if you go to Options-Preferences-Audio tab-drivers button
Is the saffire listed in the drivers section?
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2004
Posts: 92
Enthusiast
|
|
OP
Enthusiast
Joined: May 2004
Posts: 92 |
Yes it is. Actually, before I disabled the onboard realtek sound, the win. mixer only showed the realtek mic input as well. It should have also displayed a line input with the realtek, but it didn't. I don't believe this is a realband problem, but something to do with win 7. I posted here because of the great help and support this forum provides. Bobby
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,167
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,167 |
Strange that RB would find it if Windows can't. Doesn't seem right, as RB gets the report from the OS as to the available ports.
Is it just the spdif that does it? Are there other Saffire inputs to try?
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Are you expecting the Saffire to use the Windows Sound Mixer Applet?
I don't know the Saffire, but it would be odd if a high quality aftermarket Firewire sound device used that bit of software to control it. Typically there is *another* software mixer that installs with the device's drivers and software. Often it puts a new icon in the taskbar for access.
Maybe that's the problem...
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Aug 2006
Posts: 8,502
Veteran
|
|
Veteran
Joined: Aug 2006
Posts: 8,502 |
If the saffaire is attached thru Firewire, then you would not use the spdif input as that is digital and the other is not.
HP Win 11 12 gig ram, Mac mini Sonoma with 16 gig of ram, BiaB 2025, Realband, Reaper 7, Harrison Mixbus 9 32c , Melodyne 5 editor, Presonus Audiobox 1818VSL, Presonus control app.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2004
Posts: 92
Enthusiast
|
|
OP
Enthusiast
Joined: May 2004
Posts: 92 |
My guitar is plugged into a Vamp pro and I am using the spidif output into the saffire spdif input. I could have substituted "line input" for "spdif input" in my qeuery. To help clarify my problem, realband needs me to set the record input level. The only place I would have this ( as far as I know ) is the windows 7 record mixer, which again only shows my mic input on my saffire pro. My old computer with a creative audigy card did have it's own mixer applet. The saffire mix control software app. is for monitoring and routing only. The only gain control is on the saffire hardware and this is for mic & line inputs 1 & 2 only. I have been searching the web and found that it might be a driver issue.....Just got a second reply from focusrite....they have released a new driver. The blurb with it now says "fully compatible with new operating systems, win7 + mac. Funny, one of the faqs on there answer base, before the release of this driver, is about how the saffire works with win 7 64 bit. This is what I checked before I purchased the unit. I will try the new drivers this weekend. Thanks for your help. Will let you know....Bobby
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2005
Posts: 1,992
Expert
|
|
Expert
Joined: May 2005
Posts: 1,992 |
Bobby
i know spdif is all the rage with many folks , but given electronics design these days unless theres a screw up many people record just fine useing line inputs.
the normal consumer after the songs done only cares bout the overall song.
if the saffire control panel dont let you control the level going into RB..
(which surprises me given the cost of the unit)...then just set the output volume in
the behr unit feeding the saffire.
retired puter engr....powertracks on amd......NICE !
"what is the black art of audio engineering ?"
my silly songs...motagator.com/bmanning
see my tips in the tips section.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
S/PDIF yields *absolutely no noise floor* manning.
When using it with something like a guitar amp/speaker cab/effects simulator, it can really make a difference...
On top of that, use of the digital S/PDIF connect avoids passing your already digitized signal through a needless D-A and then the A-D in the sound device, which, as you should know, *changes* the bitstream. Usually for the worse. It also opens the door to needless clocking jitter problems.
Another good thing about using S/PDIF connect when available, is that it completely bypasses any possibility of the dreaded AC Ground Loop nasties of buzz, hiss, etc.
Here in my little home studio, any device that has S/PDIF output, that's the output of choice, every time. In my case that includes certain MIDI synths as well.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,167
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,167 |
As Mac always says-
Divers, drivers, drivers, ...
more important in Win 7 64 bit than ever..
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Jeez Manning what are you thinking. You're eliminating an AD &DA process.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2005
Posts: 1,992
Expert
|
|
Expert
Joined: May 2005
Posts: 1,992 |
ok spdif lovers..lol.
record anything..split the signal...
one going to recording daw via spdif and one via line input
thru decent A>>D.
so you have 2 recorded files.
now drag off the street 5 "normal consumers" ,
and ask em if they hear a difference.
lol.
I'M NOT ARGUING spdif is TECHNICALLY BETTER.
i'm just suggesting looking at the bigger scheme of things vis the consumer.
crikey , i used to use a 2 inch multitrak tape machine with a snr of -55db !!
all i'm suggesting is that some good folks worry too much bout certain things.
and its not the end of the world if spdif aint available.
on another forum somewhere someone compared a daft SB card recording wise
to top line convertors. only a few could tell the diff.
now i wouldnt use a SB card mates if i was given one.
all i'm suggesting is some people over worry bout this stuff.
hits were made years back going into line inputs on 8 trak adat digital tape machines for example.
sure use spdif if ya got it...but its not the end of the world if ya dont imho.
retired puter engr....powertracks on amd......NICE !
"what is the black art of audio engineering ?"
my silly songs...motagator.com/bmanning
see my tips in the tips section.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2004
Posts: 92
Enthusiast
|
|
OP
Enthusiast
Joined: May 2004
Posts: 92 |
I changed the firewire driver back to host compliant, installed ver 2.0 driver and still have the same problem. My DAW(PG music Realband) shows all of the saffire asio inputs and outputs. When I select an input my DAW gives me a message, " in the windows control panel sound that appears, select(right click enable) the source(s) to record from", then automaticaly opens the windows 7 record applet. Once again,only the mic appears. I cannot record from any other input, because they won't show in the win 7 record window. I need all the inputs to show in this window, so I can access the record fader to set levels. Is this a saffire pro 24 dsp driver issue? Iam not tech enough to go any further. Can you help me with an explanation please? I hope I haven't purchased an expensive paper weight. Thanks, waiting for your reply.
Above is a copy of my third email to focusrite support. Manning1, thanks for your help. Iam not looking for a workaround. I expect the product to work as advertised. Can someone on this forum confirm that this is a driver issue, or has tech expertise to help me out? Thanks...Bobby
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,167
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,167 |
It does sound like a driver issue. Can the drivers be run in compatibility mode to see if it is a 64 bit issue? A search shows quite a few with Win 7 problems .. Have you tried Saffires suggestions and new drivers? I found this- Windows 7 Users: If you were previously using a Saffire on Windows 7 utilising the Windows Legacy FireWire driver, you will need to update your Windows FireWire driver before installing this update. For more information on this, please visit the Focusrite Answerbase. Here- http://www.focusrite.com/support/saffire/saffire_pro_24_dsp
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2010
Posts: 589
Journeyman
|
|
Journeyman
Joined: Jan 2010
Posts: 589 |
Yeah!and now some studios are going back (and loving it )to analogue for that"warm" sound that they just dont get with digital. Im no tech expert by any stretch of the imagination but the Beatles Sgt Pepper album done on 8 track should say it all as far as Im concerned. But for me software like biab is a Godsend and though I loved my reel to reel Revox the cutting and pasting and winding back did my head in! Frankie 
AMD Athlon 7550 dual core
processor 2.51 ghz
1 87 gb ram
windows 7 Ultimate
yamaha rev 500 effects
tacam DP-24 DAW
Samson Resolv NF monitors
Yamaha PSR-620 Keyboard
Fender semi accoustic guitar
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
I don't make my music for the lowest common denominator, nor do I poll the lowest common denominator for opinions about it.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2004
Posts: 92
Enthusiast
|
|
OP
Enthusiast
Joined: May 2004
Posts: 92 |
Thanks Rharv. I have already installed their newest ver.2.0 driver. Heard from focusrite tech support again and they say they think it might be a conflict with my software(realband). Send us a screen shot of the window that opens in realband when you select a recording input. I fired of another email once again explaining that realband opens the win7 mixer applet.I could leave realband closed, open up the win7 mixer applet and not see any of the pro24dsp's inputs except for the mic. The conflict appears to be with the pro24dsp and windows 7. I would think a successful company like focusrite would be more forthcoming if there is a problem. The three responses I have received so far make me feel as if they haven't even read my replies. ...Bobby
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,167
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,167 |
I hate it when you get the generic response like they haven't even read it. If you look in the control panel do you see any entries for the Saffire? How about in 'Programs'? Just trying to help you find the missing mixer! It may be they are stalling until new drivers are released, or they may just be overwhelmed at this point.. Wishing you luck. I see you did get the new drivers, but did you follow the instructions for Win7 I linked to? Seems there is a little more to do than install the drivers (possibly).. http://www.focusrite.com/support/saffire/saffire_pro_24_dspLink is for test exerpt- "Windows 7 Users: If you were previously using a Saffire on Windows 7 utilising the Windows Legacy FireWire driver, you will need to update your Windows FireWire driver before installing this update. For more information on this, please visit the Focusrite Answerbase." Could be a Firewire compatibility issue, we have seen that more than once
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2004
Posts: 92
Enthusiast
|
|
OP
Enthusiast
Joined: May 2004
Posts: 92 |
Yes Rharv, I followed focusrites instructions to the letter. I reverted back to host compliant firewire driver( was running on legacy), and installed the new ver2.0 driver. My saffire shows as the default audio device and saffire mix control is in my program file. Iam using a siig firewire card with texas inst. chips, one of the ones recommended by focusrite. The only fix i have seen on windows 7 forum is to open win 7 mixer applet and right click an empty area and put a check mark in the boxes that appear-show disabled devices + show disconnected devices. This fix has apparently helped others to see all their record inputs ( line, digital, stereo mix etc.) On win 7 forum they also say if this fix does not help, then you need to look for updated drivers. Focusrites ver2.0 is supposed to be the latest win 7 64 bit driver.
I realized that I never uninstalled the drivers for my onboard realtek sound,only disabled it in bios. I did a web search to see if this could interfere, but couln't find an answer. Do you know? Should I try uninstalling them in add remove programs? Thanks for your help....Bobby
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,167
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,167 |
I would try enabling the onboard first to see if it initiates anything in Win 7.
You shouldn't need to uninstall it, have you read anywhere that others had success after uninstalling?
Do you have the install files to re-install?
I am at a loss here.. can't think what else to try.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Video: Band-in-a-Box® 2025 for Mac®: VST3 Plugin Support
Band-in-a-Box® 2025 for Mac® now includes support for VST3 plugins, alongside VST and AU. Use them with MIDI or audio tracks for even more creative possibilities in your music production.
Band-in-a-Box® 2025 for Macs®: VST3 Plugin Support
Video: Band-in-a-Box® 2025 for Mac®: Using VST3 Plugins
Join the conversation on our forum.
Band-in-a-Box 2025 for Mac Videos
With the release of Band-in-a-Box® 2025 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll also keep this forum post updated so you can easily find all the latest videos in one convenient spot.
From overviews of new features and walkthroughs of the 202 new RealTracks, to highlights of XPro Styles PAK 8, Xtra Styles PAKs 18, the 2025 49-PAK, and in-depth tutorials — you’ll find everything you need to explore what’s new in Band-in-a-Box® 2025.
Reference this forum post for One-Stop Shopping of our Band-in-a-Box® 2025 Mac Videos — we’ll be adding more videos as they’re released!
Band-in-a-Box 2025 for Mac is Here!
Band-in-a-Box® 2025 for Mac is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!
Special Offers
Upgrade to Band-in-a-Box® 2025 for Mac with savings of up to 50% on most upgrade packages during our special—available until July 31, 2025! Visit our Band-in-a-Box® packages page for all the purchase options available.
2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Mac 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.
If you have any questions, feel free to connect with us directly—we’re here to help!
Band-in-a-Box 2025 Italian Version is Here!
Cari amici
È stata aggerate la versione in Italiano del programma più amato dagli appassionati di musica, il nostro Band-in-a-Box.
Questo è il link alla nuova versione 2025.
Di seguito i link per scaricare il pacchetti di lingua italiana aggiornati per Band-in-a-Box e RealBand, anche per chi avesse già comprato la nuova versione in inglese.
Band-in-a-Box 2025 - Italiano
RealBand 2025 - Italiano
Band-in-a-Box 2025 French Version is Here!
Bonjour à tous,
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
BIAB 2025 - francisation
RealBand 2025 - francisation
Voilà, enjoy!
Band-in-a-Box 2025 German Version is Here!
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Stay up to date—get the latest update now!
|
|
|
|
|
|
|
|
|
|
|
|
Forums58
Topics84,317
Posts777,654
Members39,617
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean