Quote:

That is what i have been doing to get around the synth issues.
As far as the ASIO i am using the M-Audio driver i have had for every, and i have tried MME as well and both are doing this skipping halting thing. I also added a gig of ram, so that the unit has 2 gigs not on a AMD 2400+ XP machine with no internet or anything else.




I would be checking the IRQ table to see what else is being shared with that soundcard.

To get to your IRQs, go to "Start", "Run", type in "msinfo32" and click "OK". In the left window, click on the "Hardware Resources" plus sign, click on "IRQs" and, after "polling" the computer, it will display what IRQ each peripheral is assigned to in the right window.

Ignore the Windows' reports of "no conflict". Bah.

Instead, make good and sure that the IRQ number for the soundcard *is not being shared by any other device*.

If it is, the only solution is to shut down the machine and move the card to another PCI slot, reboot and check again.


--Mac

PGmusic FAQs, Tutorials and Updates! click here

You must be Audiominds.
www.audiominds.com