|
Log in to post
|
Print Thread |
|
|
|
|
|
RealBand
|
Joined: Mar 2002
Posts: 676
Journeyman
|
OP
Journeyman
Joined: Mar 2002
Posts: 676 |
I've tried two different interfaces in the past few years and I've yet to get anything that didn't sound like a distorted robot. This is true for audio and synths. I thought that my brand new computer and brand new M-Audio ProFire 610 interface would certainly work, but there it is again...what the heck am I doing wrong? MME works beautifully.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2005
Posts: 1,992
Expert
|
|
Expert
Joined: May 2005
Posts: 1,992 |
seems that for some asio works n others not.
just a stab in the dark...is the maudio set for 16 bit ??
if not , try that. 44.1/16.
if you can post a pic of your maudio control panel.
as well as a pic of your audio driver preference settings in rb.
please do so cos it helps to get comments.
if your brand new puter is W7.
make sure that the correct w7 compatible drivers are chosen.
retired puter engr....powertracks on amd......NICE !
"what is the black art of audio engineering ?"
my silly songs...motagator.com/bmanning
see my tips in the tips section.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Well my PCMCIA Creative Audidgy 2 ZS Notebook with KX Drivers @ 8 MS works fine.
The internal Realtek AC97 card with special 3rd party ASIO drivers @4 MS works fine.
Don't use them though!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,126
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,126 |
Older M-Audio works here also. It's likely a setting, buffer or bitrate or such.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Mar 2002
Posts: 676
Journeyman
|
|
OP
Journeyman
Joined: Mar 2002
Posts: 676 |
Ok, Bob and Manning1, I checked the M-Audio settings and it was the buffer...way too low at 256. It's working now! Thanks!
Dan
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Mar 2002
Posts: 676
Journeyman
|
|
OP
Journeyman
Joined: Mar 2002
Posts: 676 |
False alarm. It was still using MME, which sounds great. I still get the bad sound using ASIO. I'm stumped now. Something's not set up right.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Sounds to me like you used them on another program and they were not released. Open all audio programs and unassign ASIO in all of them and try again.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jan 2003
Posts: 5,082
Veteran
|
|
Veteran
Joined: Jan 2003
Posts: 5,082 |
Also try d/l'n the latest ASIO driver for your interface and OS. If that doesn't help, you may wanna experiment with the ol-ASIO4ALL driver out there in cyberspace.
ASIO is normally used for real time playback/recording of a VSTi. Otherwise, MME works a treat as well.
Trax
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Quote:
.... I've yet to get anything that didn't sound like a distorted robot. ....
A file set to one bitrate and the soundcard set to another can do that.
Ideally, you want to set your soundcard's Control Panel such that it allows host program to dictate bitrate. Even then, you have to know what bitrate the file was recorded at and then set the host program internally to suit. This does not work as invisibly as it does with Windows Sound Drivers, which can often confuse folks who expect ASIO to work exactly the same.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Mar 2002
Posts: 676
Journeyman
|
|
OP
Journeyman
Joined: Mar 2002
Posts: 676 |
Mac, I did that. I matched 16/44.1 for everything, but still got the the distorted robot sounds. So, I tried some trial and error with the settings and this seems to be the culprit:
There is a box next to the Audio Driver type that says "Allow IM effects recording (ASIO-only)." I unchecked it and now the audio playback sounds normal. Any ideas about that?
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,126
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,126 |
IM means 'Input Monitor' which means the computer was trying to run the input signal thru any DX FX you had loaded on that track while it was recording it (in real time).
That puts quite a load on the system, and if FX are not loaded or not quality FX it creates even more problems.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jun 2005
Posts: 7,693
Veteran
|
|
Veteran
Joined: Jun 2005
Posts: 7,693 |
Yeah, another classic example of just how tricky this stuff really is. It's not anybody's fault it just reinforces the need to be a computer nerd and know the language of audio engineering to accomplish anything. It's also why so many people think a program is buggy when it's not. Trying to emulate a recording studio in your computer is not easy because the programmers have no choice but to use the language of recording studios. If you have no experience at that, then you have to read up on it in order to learn those terms or you wind up frustrating yourself.
Even though a basic PC will work, a higher end one (of course much more money) is better so when someone asks what PC should I get, the answer should be the most powerful one you can afford. The new quad core Intel i7 chip with the latest Asus motherboard is $829 at Newegg. That's only the chip and motherboard, nothing else. I'm preparing to build a new system and I just saw that yesterday but I don't think I'm going to go that much. That's more than a whole bunch of complete PC's but I'm sure it will run many tracks with live DXi effects.
Bob
Biab/RB latest build, Win 11 Pro, Ryzen 5 5600 G, 512 Gig SSD, 16 Gigs Ram, Steinberg UR22 MkII, Roland Sonic Cell, Kurzweil PC3, Hammond SK1, Korg PA3XPro, Garritan JABB, Hypercanvas, Sampletank 3, more.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Mar 2002
Posts: 676
Journeyman
|
|
OP
Journeyman
Joined: Mar 2002
Posts: 676 |
Problem is, Bob I'm no newbie. I've been doing this stuff for years, using PG products and Sonar. I know what IM effects are and my computer and audio interface are pretty decent. What I don't understand is why unchecking one thing suddenly clears up the problem, when I have yet to even try recording. This is affecting playback of audio and MIDI tracks. I just want to know why it's affecting that.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2000
Posts: 22,126
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,126 |
Because when that is enabled, the input is being run thru effects in realtime. I believe you can sing into the mic and hear the effects even if record is not enabled.. may have to double check that, but I think it does. Even if it doesn't they are taking up RAM and processor attention.
Look at it like It's another service running, and under ASIO which means it is requiring more attention to begin with from the system in general.
So if the computer is running those effects the whole time it IS a load on the system. Maybe switching to a different 'thread' for the processor will help, maybe not.
Only explanation I can think of.
Last edited by rharv; 05/03/10 02:53 PM.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Aug 2006
Posts: 8,418
Veteran
|
|
Veteran
Joined: Aug 2006
Posts: 8,418 |
My guess is that it is putting a load on the system. Since it is routing the signal thru the IM loop. maybe there is a effect somewhere that is having a well .... er ... effect.
One thing i have noticed is that PG programs especially yhe PTPA based stuff is sensitive to these things. I can not even get ASIO to play with mine now, and i have used it for years.
HP Win 11 12 gig ram, Mac mini with 16 gig of ram, BiaB 2025, Realband, Reaper 7, Harrison Mixbus 9 32c , Melodyne 5 editor, Presonus Audiobox 1818VSL, Presonus control app.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Jun 2005
Posts: 7,693
Veteran
|
|
Veteran
Joined: Jun 2005
Posts: 7,693 |
Trust me, I know how it is Dan. You can have years of experience but overlook something like this. Yes, live DXi effects definitely puts a big strain on your system. Maybe you never noticed it before because you only had them applied to one or two tracks but depending on your system of course, do that on ten or more tracks at once and see what happens. These sorts of details will drive you crazy sometimes.
Bob
Biab/RB latest build, Win 11 Pro, Ryzen 5 5600 G, 512 Gig SSD, 16 Gigs Ram, Steinberg UR22 MkII, Roland Sonic Cell, Kurzweil PC3, Hammond SK1, Korg PA3XPro, Garritan JABB, Hypercanvas, Sampletank 3, more.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Mar 2002
Posts: 676
Journeyman
|
|
OP
Journeyman
Joined: Mar 2002
Posts: 676 |
I've now tried this out and tried everything. I don't get it. I have a brand new quad core system with 8GBs RAM. I have a fast Firewire interface. There's no way that IM with effects is straining my system. There's something else wrong here.
With my last, computer - a wheezing old Compaq - I used WDM drivers in Sonar and a mere 1GB or RAM. With that, I got decent latency and had no problems running multiple VST effects when IMing. That was with multiple tracks, synths, and effects running.
Now, with my new system, I can't use ASIO in RealBand with the IM effects monitoring. It won't even work when I'm just playing back tracks with no effects loaded in the mix.
There is something wrong and I don't think it's my "system being overloaded." That just can't be. If my computer is being overloaded, then how does anyone get this to work?
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: Aug 2006
Posts: 8,418
Veteran
|
|
Veteran
Joined: Aug 2006
Posts: 8,418 |
I have problems with Rb and ASIO on my system. It runs the CPU meter in the RED, but with MME it stayt very low. So i use MME.
HP Win 11 12 gig ram, Mac mini with 16 gig of ram, BiaB 2025, Realband, Reaper 7, Harrison Mixbus 9 32c , Melodyne 5 editor, Presonus Audiobox 1818VSL, Presonus control app.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
I just got a new interface that's strictly for bass/guitar. It's ASIO only. Doesn't even have WDM drivers. Works great. It's a Stealth interface by IK Multimedia. Came with my Ampeg SVX Studio.
|
|
|
|
|
|
|
|
|
|
|
|
|
RealBand
|
Joined: May 2005
Posts: 1,992
Expert
|
|
Expert
Joined: May 2005
Posts: 1,992 |
DanL
in control panel under ieee on your system what fw chipset do you have ??
be aware that lots of fw sound devices like to interface with a TI fw chipset.
this is a known issue with many fw sound devices.
best bet is to ask the manufacturer of your fw sound device
what fw chipsets on the host computer it likes.
otoh this might not be your problem.
just because you have a nice quad isnt the whole story.
sometimes its how the drivers or the fw or the fw sound device control
panel is set up mate.
ive seen on various recording forums where folks have fw issues.
many times its not related to the music software used.
but just a set up issue.
please post a pic of your maudio control panel settings
plus a pic of your rb settings.
retired puter engr....powertracks on amd......NICE !
"what is the black art of audio engineering ?"
my silly songs...motagator.com/bmanning
see my tips in the tips section.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Holiday Weekend Hours
Our Customer Service hours this weekend are as follows:
Friday, April 18: 8:00 - 4:00
Saturday, April 19: closed
Sunday, April 20: closed
Monday, April 21: Regular hours
Thank you!
Band-in-a-Box 2025 French Version is Here!
Bonjour à tous,
Band-in-a-Box® 2025 pour Windows est disponible en Français.
Le téléchargement se fait à partir du site PG Music
Pour ceux qui auraient déjà acheté la version 2025 de Band-in-a-Box (et qui donc ont une version anglaise), il est possible de "franciser" cette version avec les patchs suivants:
BIAB 2025 - francisation
RealBand 2025 - francisation
Voilà, enjoy!
Band-in-a-Box 2025 German Version is Here!
Update Your Band-in-a-Box® 2025 to Build 1128 for Windows Today!
Already using Band-in-a-Box 2025 for Windows®? Download Build 1128 now from our Support Page to enjoy the latest enhancements and improvements from our team.
Stay up to date—get the latest update now!
Update to RealBand® 2025 Build 5 Windows Today!
Already using RealBand® 2025 for Windows®? Download Build 5 now from our Support Page to ensure you have the latest enhancements and improvements from our team.
Get the latest update today!
PowerTracks Pro Audio 2025 for Windows is Here!
PowerTracks Pro Audio 2025 is here! This new version introduces many features, including VST3 support, the ability to load or import a .FLAC file, a reset option for track height in the Tracks window, a taller Timeline on the Notation window toolbar, new freeze buttons in the Tracks window, three toolbar modes (two rows, single row, and none), the improved Select Patch dialog with text-based search and numeric patch display, a new button in the DirectX/VST window to copy an effects group, and more!
First-time packages start at only $49. Already a PowerTracks Pro Audio user? Upgrade for as little as $29!
www.pgmusic.com/powertracks.htm
Video: Summary of the New Band-in-a-Box® App for iOS®
Join Tobin as he takes you on a tour of the new Band-in-a-Box® app for iOS®! Designed for musicians, singer-songwriters, and educators, this powerful tool lets you create, play, and transfer songs effortlessly on your iPhone® or iPad®—anytime, anywhere.
Band-in-a-Box® for iOS® :Summary video.
Check out the forum post for more information.
|
|
|
|
|
|
|
|
|
|
|
|
Forums58
Topics83,914
Posts772,191
Members39,487
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
|
|
|
There are no members with birthdays on this day. |
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean