I respectfully disagree.
If you record your vocals, you can go to the FX area and select Input Monitor as the track input.
This gets tricky but can be done.

In your Audio Preferences you have to be using ASIO as the driver type, and then enable a couple options depending on whether you just want to hear the effects while singing, or if you also want to record them.
Top Image

Then select Input Monitor as the source (second image) to use it.

Further settings are determined in your Audio Interface, but it can & has been done.

The below is from page 253 of the User Guide (Manual) for my version.
Quote:
Enable Input Monitoring (ASIO Only)
When this checkbox is enabled in the Audio dialog (and ASIO is selected in
the Driver Type combo) then PowerTracks Pro Audio will take the ASIO input signal from input port number 1 and
send it to output 1 so that you will hear the input through the speakers.
You can apply real time effects to the monitored input by selecting “Input” in the top combo box of the
DirectX/VST Real Time Effects dialog. You can then select up to four DirectX or VST effects.
WARNING! - Do not enable this feature if the input port number 1 is set to record the output (e.g. “What you hear” or “Mix”)
because enabling input monitoring in this case will cause massive feedback that could hurt your ears!
When Allow IM effects recording (ASIO only) is enabled, and Input
Monitoring is enabled, and effects plug-ins are enabled for input monitoring, the effected signal will be recorded
instead of the dry signal

Attached Files (Click to download or enlarge) (Only available when you are logged in)
PT_prefs.jpg (107.58 KB, 26 downloads)
PT_InsertMonitor.jpg (125.04 KB, 26 downloads)
Last edited by rharv; 08/16/22 01:31 PM.
I do not work here, but the benefits are still awesome
Make your sound your own!