I have a question about microphone latency. I'm trying to record specifically with band in a box. I just got a new headphone with a microphone on it and I'm trying to use it but it seems that when I try to record my voice on my song the audio of my vocal is falling behind the music what can I do to fix this? Thank you for any help. I have band in a box 2020 and I have never tried to record with the USB in band in a box, but like I said my voice keeps falling behind the music and I'm wondering what's wrong and how can I fix this?
Music is an expression that is a universal language, Never criticize anybody to harshly. They need time to grow but when they do, they do. Always be kind in what you say and do because the man upstairs is watching.
Generally this is fixed by using an appropriate auidio driver. You need to install an ASIO driver. Not MME or WAS you need ASIO... to reduce latency to an acceptable level.
most people/project studios use a low latency usb interface with asio/wdm drivers.and plug a xlr mic into the interface. a lot of interfaces now have v low latency.some of the order of a few millisecs which one doesnt notice.
i'm not at my pc right now...but if i remember there is a adjust in the drivers section of prefs for latency. (i would also talk to support n' see if they have any triks/solutions....cos ive never used your approach/gear)
it might be a good idea to post back more info on manufacturer of your mic etc as well as pics of your bb driver settings...which helps in diagnosis.
finally have you ever run latency mon on your pc ?
my songs....mixed for good earbuds...(fyi..my vocs on all songs..) https://soundcloud.com/alfsongs (90 songs created useing bb/rb) (lots of tips of mine in pg tips forum.)
If your audio card/module has direct monitoring, then you're probably better using that as it will have essentially zero latency. If not you'll have to use one of the above methods to get low latency.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2025 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
Trapper456, My USB gaming headset with integrated headphone and microphones is likely similar to what you are using. You can not minimize your audio latency with your existing setup.
There are three solutions to your issue: (1) Use an external audio interface that includes direct monitoring. (2) Use different software that has a direct monitoring feature. (3) Update Band-in-a-Box to 2023 which has (new this year!) the direct monitoring feature.
Option 1: Most audio interfaces include an internal mixer that combines the outgoing computer audio signal with incoming audio coming from a microphone or instrument and then sends the combined audio signal to a headphone jack. The interface delays your incoming audio signal long enough for the incoming and outgoing audio signals to match. Not all audio interfaces have this feature and they all seem to have their on marketing name for the feature. Loopback, echo, direct input and direct monitoring are names I can think of off hand. The +++ Samson Go Mic +++ is a relatively inexpensive USB microphone with this feature. This from the webpage link:
Quote:
It also includes an 1/8″ (3.5mm) headphone output for zero-latency direct monitoring. This means there will be no delay between the audio you’re recording and the audio you’re hearing.
Option 2: Many DAWs have a button or setting that adjusts track audio output to match a recorded audio input. The DAW I use, Cakewalk by Bandlab, calls this echo and it is discussed in more detail +++ HERE +++.
Option 3: A +++ new feature +++ in 2023 Band-in-a-Box is audio input monitoring.
Quote:
Audio Input monitoring to hear your Audio Input (e.g., electric guitar with effects) through to Audio Out.
Quote:
This is like "Audio Thru" and it routes incoming audio to Audio Out.
To use this feature, you need to arm the track that you are recording to. Right-click on the track button in the Mixer and select the Arm Track for Audio Input Monitoring menu item, or right-click on the VU meters and select Arm Track from the menu.
The VU meters right-click menu has options to select an audio input. For example, if your audio interface has two inputs (right/left) and you want to record from a microphone plugged into the right input, select the Mono Right to Stereo menu item.
When the track is armed, blue borders are drawn around the VU meters. You can now monitor audio input along with the effects that you select on that track. For example, if you want to add a tremolo effect to your recording, right-click on the first slot in the Mixer, select Choose Plugin from the menu, and select a tremolo effect. Now, when you sing or play an instrument though the microphone, you will see it on the VU meters and you will hear it along with the tremolo effect.
I'm assuming this mic with headphones uses a USB connection. When USB mics were first introduced, they were cheap and were promoted for podcast use. It was simply not possible to get anything really good out of them. I don't know if that's still the case, but I don't see a lot of USB mics in the Sweetwater catalog and I assume that's for a reason. The better solutions have been discussed above.
If this headphone / mic unit does not connect via USB, then never mind; please identify the model and brand.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus 192 & Faderport 8, Royer 121, Slate VSX, Adam Sub8 & Neumann 120 monitors.
I have a question about microphone latency. I'm trying to record specifically with band in a box. I just got a new headphone with a microphone on it and I'm trying to use it but it seems that when I try to record my voice on my song the audio of my vocal is falling behind the music what can I do to fix this? Thank you for any help. I have band in a box 2020 and I have never tried to record with the USB in band in a box, but like I said my voice keeps falling behind the music and I'm wondering what's wrong and how can I fix this?
Get a proper audio interface with proper ASIO drivers and a proper microphone. Done.
Byron Dickens
BIAB. CbB. Mixbus 32C 8 HP Envy. Intel core i7. 16GB RAM W10. Focusrite Scarlett 18i 20. Various instruments played with varying degrees of proficiency.
So what I have is a H390 USB computer headset with the microphone attached that I bought from Walmart. For $47.00, when I recorded my voice, and my voice falls behind the music. I have Band in a Box 2020.
Music is an expression that is a universal language, Never criticize anybody to harshly. They need time to grow but when they do, they do. Always be kind in what you say and do because the man upstairs is watching.
So what I have is a H390 USB computer headset with the microphone attached that I bought from Walmart. For $47.00, when I recorded my voice, and my voice falls behind the music. I have Band in a Box 2020.
Music is an expression that is a universal language, Never criticize anybody to harshly. They need time to grow but when they do, they do. Always be kind in what you say and do because the man upstairs is watching.
So what I have is a H390 USB computer headset with the microphone attached that I bought from Walmart. For $47.00, when I recorded my voice, and my voice falls behind the music. I have Band in a Box 2020.
Not suitable for recording.
Once again: Get a proper audio interface with proper ASIO drivers and a proper microphone. Done.
Last edited by Byron Dickens; 03/27/2305:15 PM.
Byron Dickens
BIAB. CbB. Mixbus 32C 8 HP Envy. Intel core i7. 16GB RAM W10. Focusrite Scarlett 18i 20. Various instruments played with varying degrees of proficiency.
So what I have is a H390 USB computer headset with the microphone attached that I bought from Walmart. For $47.00, when I recorded my voice, and my voice falls behind the music. I have Band in a Box 2020.
What is your audio interface, also called a sound card. If you are using your mic directly into your computer you are probably using a REaltek sound card and they are not for recording music/vocals. I believe what you purchased is used for games and talking/work, not for vocal recordings.
Even a single input audio interface like this one for $40 USD:
<< So what I have is a H390 USB computer headset with the microphone attached that I bought from Walmart. For $47.00, when I recorded my voice, and my voice falls behind the music. I have Band in a Box 2020. >>
<<I'm trying to record specifically with band in a box. >>
The USB Mic/headphone combo you have is more than sufficient for the task you are attempting. The microphone has no affect to causing latency. Latency is between the built-in usb interface, the pc and program. The solution to latency can be fixed in BIAB without any additional cost or changes in hardware. Using 2020 version of BIAB doesn't have direct monitoring capability so you're unable to hear yourself playing an instrument or singing vocals during recording. You hear latency when you playback the recording. That's all that needs to be adjusted. BIAB has latency adjustments for MME, WAS, and ASIO drivers. Latency will only need an initial adjustment to synch the mic/headset to BIAB. Once the latency offset amount has been determined and adjusted, recorded audio and BIAB will be synched.
Even if you don't adjust the latency, since it's a fixed amount of milliseconds, it is a simple matter to highlight to select the entire vocal/instrument recorded audio track and cut/paste the track into synch with the BIAB tracks. This is done from the Audio Edit Window. Cut the audio track from the very beginning of the audio to past the ending and this stores the cut audio to the clipboard. Use the red curser line to mark where the beginning of the audio recording needs to be moved to. The audio recording beginning will paste at the red curser which will synch the audio recording with the BIAB tracks.
I have used that 'Latency Adjust' button in Charlie Fogle's picture a couple times when working with very basic setups. That little tool may in and of itself help you adjust your issue.
For better results, an audio interface (as mentioned) is a better approach, but usually you can get around it when needed.
I do not work here, but the benefits are still awesome Make your sound your own!
If you are serious about this hobby of recording, you should invest in the proper tools. That includes a good interface such as a focusrite Scarlett or equivalent, that runs ASIO drivers and purchase a decent condenser mic that plugs into the interface.
Neither need to be particularly expensive. There's decent condenser mics that are under $100 and will give you good sounding audio. You can get a used interface for cheap but research it first to make sure it uses ASIO and that it has phantom power for the condenser mic. You can't generally go wrong with focusrite
You can find my music at: www.herbhartley.com Add nothing that adds nothing to the music. You can make excuses or you can make progress but not both.
The magic you are looking for is in the work you are avoiding.
There are always delays in sampled systems. ASIO will only reduce the delay to a low value, that you may or may not notice.
Synchronising at playback/mixing is sensible, and if you are mixing to a video signal it becomes essential. That's why the clapper board was invented over a century ago, to sync sound and film accurately.
I would recommend ensuring your headphone microphone and audio interface drivers are up-to-date. Also, check Band in Box settings for any latency adjustments or buffer size settings you can tweak to reduce delay.
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
MIDI SuperTracks Set 46: Piano & Organ
Instrumental Studies Set 24: Groovin' Blues Soloing
Artist Performance Set 19: Songs with Vocals 9
Playable RealTracks Set 5
RealDrums Stems Set 9: Cool Brushes
SynthMaster Sounds Set 1 (with audio demos)
Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
MIDI SuperTracks Set 47: More SynthMaster
Instrumental Studies 25 - Soul Jazz Guitar Soloing
Artist Performance Set 20: Songs with Vocals 10
RealDrums Stems Set 10: Groovin' Sticks
SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Join Tobin as he takes you on a tour of the new user interface in Band-in-a-Box® 2026 for Windows®! This modern GUI redesign offers a sleek new look with updated toolbars, refreshed windows, and a smoother workflow. The brand-new side toolbar puts track selection, the MultiPicker Library, and other essential tools right at your fingertips. Plus, our upgraded Multi-View lets you layer multiple windows without overlap, giving you a highly flexible workspace. Many windows—including Tracks, Piano Roll, and more—have been redesigned for improved usability and a cleaner, more intuitive interface, and more!
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean