|
Log in to post
|
Print Thread |
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 22,430
Veteran
|
Veteran
Joined: May 2000
Posts: 22,430 |
In RB you use the event list to 'insert' a program change. This allows you to set the MIDI channel and program number (patch number) that will be assigned to the Roland. This can be done using GUI with the PAT file, as you have done also. When you say they don't 'stick' that is where I am getting the idea that another program change command is in the file and changing it. Otherwise nothing compels the Roland to change the patches or programs. If indeed you do have sysex information being used, this could, theoretically be the issue. Are you using sysex, or assuming that this is how the patch change messages work? You'll likely not be able to find the drum patch changes in the PAT file, since they are all on channel 10. We handle that by using a patch change number on MIDI channel 10. Basic drumsets in the GM setup are listed here at the bottom of the page- http://www.pgmusic.com/tutorial_gm.htmTo use other drums from that synth you will need to know the bank and program numbers, which will be in the manual under the MIDI specs section.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Let see if I can explain a little. I'm a bad typist so I tend to be brief. here goes. First some facts.
1. In the world of MIDI there are 16 channels
2. Your keyboard is 16 part multitimbral . That means it can "listen" to all 16 channels of MIDI separately.Think of it as 16 individual synths inside one box. You can either set these separate synts so that the patches stay the same no matter what info comes into them or you can set them to receive program changes via BIAB. You also set each of these synths to listen on a particular midi channel.
So how to set up your RD700.
1. Set it to respond to program changes in multi timbral mode.
2. Set each of these "parts" to receive on a different midi channel. I'd just have part 1 to receive on 1, Part 2 to receive on 2 etc.
Now when you do a song in BIAB the patches you select for each instrument will be interpreted by your RD700 and assign the appropriate patch.
BTW BIAB in it's default sends out the data on these midi channels channels
Bass=2
Piano=3
Drums=10
Guitar=6
Strings=7
Melody=4
Soloist=8
So when you play a song you should see activity on your keyboard for these channels.
Forget about the .PAT file for now. The RD700 is GM2 complient so to assign instruments all you have to do is click on the little "GM2" button that's just under the word piano.
Digest this and see what happens.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 22,430
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,430 |
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Oct 2006
Posts: 48
Enthusiast
|
|
OP
Enthusiast
Joined: Oct 2006
Posts: 48 |
Thanks Robh. So I see where my understanding is severely lacking.
Here is my analysis ... the Roland has banks, and they are either GM banks (presumably default) or some other bank (which my manual shows me how to select)
So for starters, I'm keeping the Roland in default (this is GM I presume, I only need two channels for start -- bass = 2 and drums = 10)
RB comes up with GM by default, and the GM button above the keyboard lets me change patches. Under the Track/Drum/Patchmap I have a note that there is none ... this is empty.
There are no drum patches ... this actually has been my problem all along, as I can't assign any drums to Channel 10 (well, vibes or wood blocks, but not real drums). The Roland has default drum kits on Channel 10, but there seems to be no way to get to these.
On the Roland, the drums on MIDI channel 10 come out as piano (the default for most of the channels)
I presume 'Omni' means that channel X on the sequencer controls Channel X patch on the Roland?? The Roland manual doesn't make any references to 'omni' ... is it possible this is called something else?
Do you see anything obvious that I am doing wrong? I wanted to use the RD700 patch (of a .DK file) because that is how I thought I could get a set of drums.
Chris
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jul 2000
Posts: 27,413
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,413 |
Couple of thoughts.
Did you load the .PAT file as shown earlier?
Does your Roland have a setting for something like "performance mode" as opposed to "patch mode"? Set it to performance mode. At least, that is what I have to do on my Roland Fantom. Otherwise, it cannot act as a polyphonic synth; it only sounds like one thing at a time. Look in your manual for something like "Using the Roland as an external synth".
Your Roland supports GM2. Try that, as follows:
In BIAB, go to Options, MIDI/Audio Driver Setup. Make sure your Roland is your MIDI Output device. On the Synth/Sound Card pull-down, what do you have there? The RD700 is not a choice on my system; try Roland Sound Canvas. If that doesn't work, try General MIDI Instrument. On the GM2 pulldown, select choice 2, GM2. Make sure DXi is unchecked.
Now, back in BIAB, on the GM menu, try some different settings under Send MIDI Message. Try "Send General MIDI Mode On and BB Patches", and "Auto Send GM Mode on Startup",
Also, make sure you are NOT sending any Roland GS messages.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus 192 & Faderport 8, Royer 121, Slate VSX, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2005
Posts: 7,697
Veteran
|
|
Veteran
Joined: Jun 2005
Posts: 7,697 |
Chris, you're still not telling us any details of your setup. I want to know what your PC is, CPU, RAM, OS. I want to know what you're using for audio and from within Biab and RB, exactly what you have selected in the midi output windows. That's for your PC. On the Roland, exactly what mode is displayed in the window? To simply get the basic GM patches playing with a keyboard that has a GM soundbank takes like 30 seconds to set up. The drums are automatic too. Don't worry about other patches for now, just stick to the GM sounds. Oh yeah, you haven't responded to my question about where you got that midi file from either.
I know exactly where you're coming from btw. Several years ago I bought my Kurzweil PC2X. Very similar to your Roland. 88 weighted keys, hundreds of sounds and a manual about an inch thick. I turned it on, hit bank 1, patch 1, grand piano and said cool, good sounding piano. Bank 2, patch 1 is a good Rhodes. I play about 6 or 7 of the patches. Couple of acoustic and electric pianos, organ, strings, occasionally a solo flute or steel drums. Never opened the manual, just played the basic patches for the last 6 years. That's maybe 10% of it's capabilities. I never tried to use it with my computer because I don't have room to set it up next to my desk, I have tons of softsynths and a Roland Sonic Cell module. If you want to use your keyboard as a sound module, time to crack open that manual and start reading and understanding.
We need more information at this point.
Bob
Biab/RB latest build, Win 11 Pro, Ryzen 5 5600 G, 512 Gig SSD, 16 Gigs Ram, Steinberg UR22 MkII, Roland Sonic Cell, Kurzweil PC3, Hammond SK1, Korg PA3XPro, Garritan JABB, Hypercanvas, Sampletank 3, more.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Oct 2006
Posts: 48
Enthusiast
|
|
OP
Enthusiast
Joined: Oct 2006
Posts: 48 |
Thanks Matt for the feedback. The RD700GX seems to have a default 'performance' mode (they call the modes 16CH and 16Ch+Patch) and GM2.... anyway, there is no problem with getting a multichannel output from the Roland. I don't have an RD700 option on my Opt/MIDI menu, so I have tried several things, including the Roland General MIDI. The basic problem seems the lack of drums ... there just don't seem to be any options to assign drum kits ... it's as if these are somewhere else. In general, the various Synth/Sound Card choices don't include drum kits.
So, I guess the basic unsolved problem I have is that I can get any drums associated with the Drum track (which I have assigned to Ch. 10)
Bob suggested that my computer setup might be a source of problems. I have a two month old Dell Inspirion with an AMD quad-core running 64-bit Win 7 and BiB 2010.5 so performance is up to snuff (almost 8 on the Win scale for calcs; 3.5 for video). The Roland mode is the default ... and I have been going into EDIT and tweaking some paramters, but periodically resetting.
The GM sounds do have drum kits, and these are implemented in the Roland (I have used them). I guess the question is how do I get the Drum Track to play the Roland Drums. There doesn't seem to be any entry on the GM2 menu on BiB for drums.
Crhsi
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jul 2000
Posts: 27,413
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,413 |
I don't know about the drums. Channel 10 is correct. Once Real Drums came out, I never looked at the MIDI drums again, except to manually program in a drum hit or cymbal crash here and there, and the GM kit worked fine for that. As a composer, I found that MIDI drums were too 'perfect' and led me to write songs at a faster tempo than one at which the live drummer would sound good. Real Drums cured that.
Just for fun, double-check Channel 10 in BIAB this way: Opt, Preferences, Channels. Make sure it says '10' after Drums.
While you can easily program .PAT files, and I've made several, the .DK files in the /BB folder are not able to be edited. Perhaps you should inquire of PG Music support about how to get one for your Roland. If you find out, post the answer here please. Most of the .DK files I looked at referenced a Roland MT32, whatever that was.
By the way, I do not suspect your computer has anything to do with this. However, Bob is right to ask for your specs. Sometimes that does give us a clue or becomes invaluable in problem-solving for strange problems that only occur for some people.
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Presonus 192 & Faderport 8, Royer 121, Slate VSX, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 22,430
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,430 |
Insert a program change on the drum track right at the beginning of the song.
Hard writing a program change will keep it from resetting, as it is sent every time you play the song.
Use channel 10 and send the program number you want to use for the drums.
That is how you change drum kits.
Again, these are listed on page 136 of the Roland manual from drum sets other than the GM drum sets..
For the GM drums, the drum kit program changes are-
Program # / Drum Kit
1 Standard Drum Kit
9 Room Drum Kit
17 Power Drum Kit
25 Electric Drum Kit
26 Rap TR808 Drums
33 Jazz Drum Kit
41 Brush Kit
So inserting a program change on channel 10 for program number 41 will give you brush drum kit.
Last edited by rharv; 10/13/10 07:11 AM.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Oct 2006
Posts: 48
Enthusiast
|
|
OP
Enthusiast
Joined: Oct 2006
Posts: 48 |
I think this is helping me hone in on the problem. Really everything has been working all along, except for the assignment of drums. All of the patch and channel settings are correct, and they seem to be stable (in fact, overall I've found in using the package that BiB is stable ... I haven't had problems with hangups and abnormal terminations in BiB which is good considering it is supporting a variety of files and drivers and ports).
The only problem is that I don't have access to drums. In looking through the various menus (and documentation) for BiB, I get the impression that it is difficult to turn off Realdrums (I've found many places that you have to set to suppress these things ... they are like zombies ... they don't die). And indeed they may be the better choice if you are using a computer as your synth, or mixing everything then sending to a speaker.
I'm using my Roland with headphones, so ... partly for simplicity ... I want everything to run through the Roland synth ... I want just MIDI coming out of the computer.
I've been playing with RealBand to see if it might be easier to get the MIDI to work, but run into the same problems -- there just doesn't seem to be access to the Roland drum kits.
Chris
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Oct 2006
Posts: 48
Enthusiast
|
|
OP
Enthusiast
Joined: Oct 2006
Posts: 48 |
Thanks rharv, this is getting me closer. I've found my Roland drum kits on the + button menu next to GM2 right above the keyboard. Setting the PAT to the Roland General Midi (which seems to be their version of GM2) seemed to bring these up. The Roland manual actually has only two pages on using it as a synth (not counting the tone chart), and I think I might have a slightly different version from you, as the page numbers don't correspond. But I see where you are looking.
I've still got to disentangle the various patches going through the BiB Melody track (all of the MIDI channels seem to be going through this) but someone else had suggested that I open up the tracks menu, or use RB instead to sort this. I'll have to search around to see where the Tracks menu is on BiB ... but there is some light at the end of the tunnel. Thanks all
Chris
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Maybe getting there.
1. Keep your keyboard in GM2 mode.
2. Enter some chords
3. Choose a style that is all MIDI. ( first entry in the style list)
4. Put a check next to drums. You'll see the list to the left of the GM2 button say "1 Standard"
5. While the song is playing click the drop down arrow and note that you have a bunch of #s but some have names. The ones with names are the GM drum Kits as Rharv mention above. Click on one of them and you'll see that it changes sound. It should anyway.
If you stop the song and hit play again it'll go back to the standard set as that's what's programmed into the style. If you want to keep those sounds assign them before you hit play and then go to file/save with patches and harmony. After that reload the file you just saved and it'll have the changes you just made.
If you are working with a MIDI file you downloaded to access the inst change menue you need to click on the round,green, SEQ button.The click Sequencer on melody track. There is were you'd change patches.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Oct 2006
Posts: 48
Enthusiast
|
|
OP
Enthusiast
Joined: Oct 2006
Posts: 48 |
John, thanks for the step by step. Unfortunately, I run into problems when I do the pulldown list to the left of GM2 ... there are no drums (there are some percussive things like synth drum and wood block, but no standard or drum kit entries)
The other think is untangling the Melody track ... I have selected 16 part as Melody, but don't see any way to assing the channels to the other instruments ... I'm exceedingly interested in drums and bass, which would be Channels 10 and 2, but I can't find any reference in the manuals to how to do this.
Is there a specific reason for running everything through Melody? It would seem reasonable to have access to MIDI channels right from the start.
Chris
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
If you are working with a MIDI file you downloaded to access the inst change menue you need to click on the round,green, SEQ button.The click Sequencer on melody track. There is were you'd change patches.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Oct 2006
Posts: 48
Enthusiast
|
|
OP
Enthusiast
Joined: Oct 2006
Posts: 48 |
Just a bit more on untangling the Melody track. It seems the SEQ button only allows me to assign patches on the Melody and Soloist track. Again, I don't really understand the rationale here, but there must be a broader application that requires this.
I've been using an F blues MIDI file that was in the BiB files, which has three channels -- bass, drums, piano. All of this is in the Melody track, and there are Play check boxes next to each, but checking and unchecking don't seem to do anything (I'm trying to kill the piano track)
Ideally I would like to move each track to the corresponding Instrument Part buttons, but don't see any way to do this
Chris
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Oct 2006
Posts: 48
Enthusiast
|
|
OP
Enthusiast
Joined: Oct 2006
Posts: 48 |
OK, wait, I've got it. I found the part of the BiB manual that deals with Importing MIDI files ... so I can take any MIDI file (including the ones that came with BiB) and essentially force the channels into the tracks with this import tool.
This also seems to be clearing up problems with the drum kits; so there must be some patch changes hard wired into the tracks that I don't understand.
Thanks for all the help from the board ... this gets me going with the software
Chris
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
OK now I'm concerned. Either a Troll is using Chris Westland's identity or Chris you're playing a game of some sort with us. If this really is Chris you telling me that a man with your background is being thrown by this program? What's up?
Biography
Chris Westland is Associate Professor of Information and Operations Management at the University of Southern California. He holds a Ph.D. in Computers and Information Systems from the University of Michigan; an MBA in Accounting and B.A. in Mathematics and Physics from Indiana University. He was previously employed as a Certified Public Accountant for Touche Ross in Chicago, and as a Database Administrator and Computer Security Analyst for Rockwell International. He is a member of INFORMS, the American Statistical Association, the American Institute of Certified Public Accountants, Beta Gamma Sigma, and is a Principal in USC's Center for Software Engineering. He has published over 50 articles in research journals and proceedings on various aspects of the economics of information technology, pricing and investment analysis for information technology, and risk assessment and control for information systems, statistics in computing, and software engineering. He is currently completing books on policy and design for electronic commerce systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Aug 2006
Posts: 8,686
Veteran
|
|
Veteran
Joined: Aug 2006
Posts: 8,686 |
Chris to have total control over the midi tracks, you need to use RB (Real Band) since it allow you to do what you wanted. BiaB assignes the tracks other than the two mentioned.
HP Win 11 12 gig ram, Mac mini Sonoma with 16 gig of ram, BiaB/RB 2026, Reaper 7, Harrison Mixbus 11 , Presonus Audiobox USB96
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
Check the User Manual for your Roland, typically towards the last pages there will be a listing of all voices and what MIDI channels they are assigned to work on.
Most MIDI synths that use GM (or GM2) mode put the Percussion Bank on MIDI ch. 10 but not all. Some still use the older ch. 16 standard. Others may use a different channel as well.
**Also check the BiaB song you are using. If the Drums trackname is in Green, signifying that RealDrums are invoked for that particular songfile, you will not hear any MIDI drums by design. Turning off the RealDrums in the RealDrums control panel such that the Drums trackname turns Yellow, signifying MIDI drums are being invoked is in order. **
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2005
Posts: 7,697
Veteran
|
|
Veteran
Joined: Jun 2005
Posts: 7,697 |
Chris, I still think your Roland is not set to GM mode because of your problem with the drums. Just being in Multitimbral mode is not necessarily GM mode. I downloaded the manual for your keyboard and what a mess that thing is! As far as I can tell, there's no mention anywhere of GM/GS, GM2, playing SMF's which is Standard Midi File, none of that. It's ridiculous. It's another example of how manufacturer's give GM the short shrift even though Roland specifically makes a big deal out of it being fully GM/GM2 compatible on their website. You would think there would be a simple entry in the index titled "if you want to play a SMF, do this". I did this before I had to leave for work so maybe it's there but I missed it. If you have Adobe Pro, try a keyword search in the online manual. I have a Roland Sonic Cell and it has to be in Performanc Mode to access the GM soundbank. When I play Biab with it, it just goes there automatically. If I''m using RB to play a midi file, same thing. Try putting your keyboard in Performance mode and see what happens. Also in Biab see the menu bar at the very top of the screen. In the middle is the GM menu. Click on that and one of the entry's in that combo box is something like send GM or GS at startup. Play with those entries and see if that does it. GS is the Roland General Midi standard, try that one first but try the GM one as well. As I said earlier, playing Biab using GM should be a no brainer. 30 seconds max. If none of this works, try going to one of the Roland user forums like this one Rolandclan I feel your pain, man. I hate this crap with a manual not explaining the most basic things. Bob
Biab/RB latest build, Win 11 Pro, Ryzen 5 5600 G, 512 Gig SSD, 16 Gigs Ram, Steinberg UR22 MkII, Roland Sonic Cell, Kurzweil PC3, Hammond SK1, Korg PA3XPro, Garritan JABB, Hypercanvas, Sampletank 3, more.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box 2026 for Windows Special Offers End Tomorrow (January 15th, 2026) at 11:59 PM PST!
Time really is running out! Save up to 50% on Band-in-a-Box® 2026 for Windows® upgrades and receive a FREE Bonus PAK—only when you order by 11:59 PM PST on Thursday, January 15, 2026!
We've added many major new features and new content in a redesigned Band-in-a-Box® 2026 for Windows®!
Version 2026 introduces a modernized GUI redesign across the program, with updated toolbars, refreshed windows, smoother workflows, and a new Dark Mode option. There’s also a new side toolbar for quicker access to commonly used windows, and the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, making it easier to customize your workspace.
Another exciting new addition is the new AI-Notes feature, which can transcribe polyphonic audio into MIDI. You can view the results in notation or play them back as MIDI, and choose whether to process an entire track or focus on specific parts like drums, bass, guitars/piano, or vocals. There's over 100 new features in Band-in-a-Box® 2026 for Windows®.
There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Upgrade your Band-in-a-Box for Windows to save up to 50% on most Band-in-a-Box® 2026 upgrade packages!
Plus, when you order your Band-in-a-Box® 2026 upgrade during our special, you'll receive a Free Bonus PAK of exciting new add-ons.
If you need any help deciding which package is the best option for you, just let us know. We are here to help!
Band-in-a-Box® 2026 for Windows® Special Offers Extended Until January 15, 2026!
Good news! You still have time to upgrade to the latest version of Band-in-a-Box® for Windows® and save. Our Band-in-a-Box® 2026 for Windows® special now runs through January 15, 2025!
We've packed Band-in-a-Box® 2026 with major new features, enhancements, and an incredible lineup of new content! The program now sports a sleek, modern GUI redesign across the entire interface, including updated toolbars, refreshed windows, smoother workflows, a new dark mode option, and more. The brand-new side toolbar provides quicker access to key windows, while the new Multi-View feature lets you arrange multiple windows as layered panels without overlap, creating a flexible, clutter-free workspace. We have an amazing new “AI-Notes” feature. This transcribes polyphonic audio into MIDI so you can view it in notation or play it back as MIDI. You can process an entire track (all pitched instruments and drums) or focus on individual parts like drums, bass, guitars/piano, or vocals. There's an amazing collection of new content too, including 202 RealTracks, new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
There are over 100 new features in Band-in-a-Box® 2026 for Windows®.
When you order purchase Band-in-a-Box® 2026 before 11:59 PM PST on January 15th, you'll also receive a Free Bonus PAK packed with exciting new add-ons.
Upgrade to Band-in-a-Box® 2026 for Windows® today! Check out the Band-in-a-Box® packages page for all the purchase options available.
Happy New Year!
Thank you for being part of the Band-in-a-Box® community.
Wishing you and yours a very happy 2026—Happy New Year from all of us at PG Music!
Season's Greetings!
Wishing everyone a happy, healthy holiday season—thanks for being part of our community!
The office will be closed for Christmas Day, but we will be back on Boxing Day (Dec 26th) at 6:00am PST.
Team PG
Band-in-a-Box 2026 Video: The Newly Designed Piano Roll Window
In this video, we explore the updated Piano Roll, complete with a modernized look and exciting new features. You’ll see new filtering options that make it easy to focus on specific note groups, smoother and more intuitive note entry and editing, and enhanced options for zooming, looping, and more.
Watch the video.
You can see all the 2026 videos on our forum!
Band-in-a-Box 2026 Video: AI Stems & Notes - split polyphonic audio into instruments and transcribe
This video demonstrates how to use the new AI-Notes feature together with the AI-Stems splitter, allowing you to select an audio file and have it separated into individual stems while transcribing each one to its own MIDI track. AI-Notes converts polyphonic audio—either full mixes or individual instruments—into MIDI that you can view in notation or play back instantly.
Watch the video.
You can see all the 2026 videos on our forum!
Bonus PAK and 49-PAK for Band-in-a-Box® 2026 for Windows®
With your version 2026 for Windows Pro, MegaPAK, UltraPAK, UltraPAK+, Audiophile Edition or PlusPAK purchase, we'll include a Bonus PAK full of great new Add-ons for FREE! Or upgrade to the 2026 49-PAK for only $49 to receive even more NEW Add-ons including 20 additional RealTracks!
These PAKs are loaded with additional add-ons to supercharge your Band-in-a-Box®!
This Free Bonus PAK includes:
- The 2026 RealCombos Booster PAK:
-For Pro customers, this includes 27 new RealTracks and 23 new RealStyles.
-For MegaPAK customers, this includes 25 new RealTracks and 23 new RealStyles.
-For UltraPAK customers, this includes 12 new RealStyles.
- MIDI Styles Set 92: Look Ma! More MIDI 15: Latin Jazz
- MIDI SuperTracks Set 46: Piano & Organ
- Instrumental Studies Set 24: Groovin' Blues Soloing
- Artist Performance Set 19: Songs with Vocals 9
- Playable RealTracks Set 5
- RealDrums Stems Set 9: Cool Brushes
- SynthMaster Sounds Set 1 (with audio demos)
- Android Band-in-a-Box® App (included)
Looking for more great add-ons, then upgrade to the 2026 49-PAK for just $49 and you'll get:
- 20 Bonus Unreleased RealTracks and RealDrums with 20 RealStyle.
- FLAC Files (lossless audio files) for the 20 Bonus Unreleased RealTracks and RealDrums
- MIDI Styles Set 93: Look Ma! More MIDI 16: SynthMaster
- MIDI SuperTracks Set 47: More SynthMaster
- Instrumental Studies 25 - Soul Jazz Guitar Soloing
- Artist Performance Set 20: Songs with Vocals 10
- RealDrums Stems Set 10: Groovin' Sticks
- SynthMaster Sounds & Styles Set 2 (sounds & styles with audio demos)
Learn more about the Bonus PAKs for Band-in-a-Box® 2026 for Windows®!
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics85,597
Posts793,842
Members39,919
| |
Most Online25,754
Jan 24th, 2025
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean