|
Log in to post
|
Print Thread |
|
|
|
|
|
Off-Topic
|
Joined: Jan 2006
Posts: 2,689
Veteran
|
OP
Veteran
Joined: Jan 2006
Posts: 2,689 |
Hi friends,
Since 8-4, my computer has been in the process of being repaired by the warranty company. After replacing 3 motherboards, the power supply and the processor, they determined that a bad memory stick was causing all of the problems in the first place. I should add that each visit causes a 3 week wait for back ordered parts. The tech. is to return and replace the 1 gig memory stick.
The computer is running, but when the fan kicks into high speed, it sounds like the wife is running a mixer or vacuum cleaner on the other side of the house.
I definitely won't be doing any recording with this machine. Thanks for listening to my rant, what I need to know is:
Can this excess noise be from the missing 1 gig memory stick? It is a 6 gig machine. Also, the front USB is dead. Can this be activated from a menu?
Don S.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2008
Posts: 1,061
Expert
|
|
Expert
Joined: Jan 2008
Posts: 1,061 |
might be the bearing in the fan. I have on like that.
Wyndham
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jul 2000
Posts: 27,569
Veteran
|
|
Veteran
Joined: Jul 2000
Posts: 27,569 |
Question 1. No.
Question 2. The tech probably did not connect the case's front panel leads to the motherboard correctly, or at all.
BIAB 2026 Win Audiophile. Software: Fender Studio One 8, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Fender Quantom HD8 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2002
Posts: 12,950
Veteran
|
|
Veteran
Joined: Dec 2002
Posts: 12,950 |
Tell us this is not a Dell, I love Dell's and would never expect this type of issues. 
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2006
Posts: 2,689
Veteran
|
|
OP
Veteran
Joined: Jan 2006
Posts: 2,689 |
Thanks for the comments. No this is not a Dell. In fact I've been using my Dell XP and wondering why I ever bought a new one.
Don S.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2000
Posts: 22,607
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,607 |
Is this, by chance, a laptop? I know the fans can seem pretty intrusive in laptops when they kick up to high speed, but they have to in order to keep it from burning up.
Some are louder than others. I've heard some that really caught my attention.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2006
Posts: 2,689
Veteran
|
|
OP
Veteran
Joined: Jan 2006
Posts: 2,689 |
No Bob, this is an HP desktop. What really gets me is the way the warranty techs solve the problems by substitution. After the second mo/b wouldn't work, they ordered a new Mo/b, a PS, and a processor. So I've got some new parts, but a basically useless computer. I've sure that they will order still more parts with the resulting 3 week wait.
Don S.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2003
Posts: 8,021
Veteran
|
|
Veteran
Joined: May 2003
Posts: 8,021 |
Mind telling us the make and were not to buy one?
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2006
Posts: 2,689
Veteran
|
|
OP
Veteran
Joined: Jan 2006
Posts: 2,689 |
Quote:
Mind telling us the make and were not to buy one?
It's an HP desktop that I bought from NewEgg. The warranty company is Service Net which I gather is an arm of New Egg.
Don S.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2003
Posts: 8,987
Veteran
|
|
Veteran
Joined: Dec 2003
Posts: 8,987 |
other don,
sorry to hear you are having problems. in the service biz we called that 'shotguning' the problem. if the tech replaces enough parts he/she is bound to solve the problem eventually. we independent servicers didn't have the luxury of an unlimited supply of spares in their 'boneyard' so the techs had to actually diagnose the problem before throwing the customer's loonies at it...strange concept, huh?
my wife is 68 and dell sent her a hard drive for her new laptop and told her to replace it herself under warranty. it was obviously used...the mounting holes were stripped. but she manged it but now the drive bounces around if she doesn't keep it laying flat. that is known as 'excellent customer support.' then have the audacity (where have i heard that word?) to plead for her 'perfect' satisfaction report.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jan 2006
Posts: 2,689
Veteran
|
|
OP
Veteran
Joined: Jan 2006
Posts: 2,689 |
Don,
Interesting concept. That's the way I used to solve automotive electrical problems 50 some years ago when I was a teenager. Between the battery, voltage regulator and generator, a mistake or 2 was still cheaper than paying a garage bill.
Don S.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2000
Posts: 38,502
Veteran
|
|
Veteran
Joined: May 2000
Posts: 38,502 |
"Parts replacement technician"
as opposed to:
"Mechanic"
Sign of the times and the technology.
To be fair, these days many mfr's actually mandate whole board replacement when in warranty over repair at the component level.
--Mac
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Oct 2007
Posts: 4,251
Veteran
|
|
Veteran
Joined: Oct 2007
Posts: 4,251 |
Mac,
Although I build my own “puters”, I must admit that I’m at a loss when trying to figure out what has failed when the thing dies. A power supply failure is pretty easy to detect, because the thing literally “stinks” when it fails. You can smell it. (Nothin’ like the smell of fried electronics in the mornin’).
And hard drives usually start making a racket before they go out. Video cards are also pretty easy since the computer fires up and runs, but you have nothing on the screen. But what about MOBO’s, processors and memory? I’ve never had these 3 items fail, but I have had power supplies, hard drives and video cards fail.
Any tips on the others?
Last edited by bobcflatpicker; 10/24/10 06:22 AM.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: May 2000
Posts: 22,607
Veteran
|
|
Veteran
Joined: May 2000
Posts: 22,607 |
In my limited experience-
MOBO's failing usually start with a device failure. Something that is there and has been working suddenly appears not to be there. (IDE controller, sound or video card etc)
Device manager will show problems.
Sometimes looking in the BIOS can tell you what's wrong. (again, checking the BIOS for power supply output can give you a heads up on power supplies going bad too).
Memory can be trickier without testing it. Systems will try to run even when mem chips start going bad, just lots of errors occurring or performance suddenly lacking.
Processors? Never had one go, ever. They seem to outlast most other components, unless overclocked, underfanned or burned by the power supply.
For many device failures, the power supply should still be considered as an early option.
Hard drive acting funny? Check voltage to it. Drive may be fine, just not getting correct power. I've had more than one drive I thought went bad come back to life with a new power supply.
I do not work here, but the benefits are still awesome
Make your sound your own!
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Oct 2007
Posts: 4,251
Veteran
|
|
Veteran
Joined: Oct 2007
Posts: 4,251 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Dec 2007
Posts: 1,439
Expert
|
|
Expert
Joined: Dec 2007
Posts: 1,439 |
Another tip when checking voltage from suspect power supplies:
Set your meter on AC and check for "ripple" on the DC. A modern digital multi meter should show zero volts when set to low AC voltage settings whilst testing DC rails. I have seen ripples as low as 2mV cause problems. Ripple is an indication of inadequate filtering. If the supply used to be good but has developed ripple then the most likely culprits are ageing electrolytic capacitors.
<edit> Umm, small caveat here: You will always see some ripple as power supplies aren't perfect, but you should expect less than 2mV.
The 12 Volt rails are less critical than the 5V and 3.3V. The CPU will also have additional power regulation and filtering on the motherboard. As a result, power problems will be more evident in other circuitry; like cards in slots, IO devices, video cards, RAM etc..
Last edited by Lawrie; 10/24/10 07:26 PM.
--=-- My credo: If it's worth doing, it's worth overdoing - just ask my missus, she'll tell ya  --=--You're only paranoid if you're wrong!
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Sep 2003
Posts: 8,333
Veteran
|
|
Veteran
Joined: Sep 2003
Posts: 8,333 |
"ageing electrolytic capacitors. " I think I resemble that symptom.
John Conley
Musica est vita
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jun 2006
Posts: 7,258
Veteran
|
|
Veteran
Joined: Jun 2006
Posts: 7,258 |
I'd ask them to exchange the fan for a larger one. A cd drive not seated properly can also make a racket. Try disconnecting the cd drive to see if that makes a difference. Do you have a graphics card with a cooling fan on it ? If so it could be THAT which is noisy ?
A larger PSU often makes a big difference too.
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Jun 2006
Posts: 7,258
Veteran
|
|
Veteran
Joined: Jun 2006
Posts: 7,258 |
Quote:
"ageing electrolytic capacitors. " I think I resemble that symptom.
John, If what I have don't hurt, ten it don't work 
|
|
|
|
|
|
|
|
|
|
|
|
|
Off-Topic
|
Joined: Sep 2006
Posts: 809
Expert
|
|
Expert
Joined: Sep 2006
Posts: 809 |
My two cents. I had a noisy fan once. I brought the peuter in and asked for a better quality noisless fan. They changed the fan and presto no niose.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
XPro & Xtra Styles PAK Sets On Sale Now - Until May 15, 2026!
All of our XPro Styles PAKs and Xtra Styles PAKs are on sale until May 15th, 2026!
It's the perfect time to expand your Band-in-a-Box® style library with XPro and Xtra Styles PAKs. These additional styles for Band-in-a-Box® offer a wide range of genres designed to fit seamlessly into your projects. Each style is professionally arranged and mixed, helping enhance your songs while saving you time.
What are XPro Styles and Xtra Styles PAKs?
XPro Styles PAKs are styles that work with any version (Pro, MegaPAK, UltraPAK, UltraPAK+, or Audiophile Edition) of Band-in-a-Box® 2025 (or higher). XPro Styles PAKS 1-10 includes 1,000 styles!
Xtra Styles PAKs are styles that work with the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box® 2025 (or higher). Xtra Styles PAKs 1-21 includes 3,700 styles (and 35 MIDI styles)!
The XPro & Xtra Styles PAKs are not included in any Band-in-a-Box® package.
The XPro Styles PAKs 1-10 are available for only $29 ea (reg. $49 ea), or get them all in the XPro Styles PAK Bundle for only $149 (reg. $299)! Listen to demos and order now! For Mac or for Windows.
The Xtra Styles PAKs 1-21 are available for only $29 ea (reg. $49 ea), or get them all in the Xtra Styles PAK Bundle for only $199 (reg. $349)! Listen to demos and order now! For Mac or for Windows.
Note: XPro Styles PAKs require Band-in-a-Box® 2025 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 19 requires the 2025 or higher UltraPAK, UltraPAK+, or Audiophile Edition. They will not work with the Pro or MegaPAK version as they require the RealTracks included in the UltraPAK, UltraPAK+, or Audiophile Edition.
Supercharge your Band-in-a-Box today with XPro Styles PAKs and Xtra Styles PAK Sets!
Band-in-a-Box 2026 for Mac Videos
With the release of Band-in-a-Box® 2026 for Mac, we’re rolling out a collection of brand-new videos on our YouTube channel. We’ll keep this forum post updated so you can easily find all the latest videos in one convenient spot.
Whether you're exploring new features, checking out the latest RealTracks or Style PAKs, this is your go-to guide for Band-in-a-Box® 2026.
Check out this forum post for "One Stop Shopping" of our Band-in-a-Box® 2026 Mac Videos!
Band-in-a-Box 2026 for Mac is Here!
Band-in-a-Box® 2026 for Mac is here and it is packed with major new features! There’s a new modern look, a GUI redesign to all areas of the program including toolbars, windows, workflow and more. There’s a Multi-view layout for organizing multiple windows. A standout addition is the powerful AI-Notes feature, which uses AI neural-net technology to transcribe polyphonic audio into MIDI—entire mixes or individual instruments—making it easy to study, view, and play parts from any song. And that’s just the beginning—there are over 100 new features in this exciting release.
Along with version 2026, we've released an incredible lineup of new content! There's 202 new RealTracks, brand-new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 5, two new RealDrums Stems sets, XPro Styles PAK 10, Xtra Styles PAK 21, and much more!
Special Offers
Upgrade to Band-in-a-Box® 2026 for Mac and save up to 50% on most upgrade packages during our special offer—available until May 15, 2026. Visit our Band-in-a-Box® packages page to explore all available upgrade options.
2026 Free Bonus PAK & 49-PAK Add-ons
Our Free Bonus PAK and 49-PAK are loaded with amazing add-ons! The Free Bonus PAK is included with most Band-in-a-Box® 2026 for Mac packages, but you can unlock even more—including 20 unreleased RealTracks—by upgrading to the 2026 49-PAK for just $49.
Holiday Weekend Hours
As we hop into the Easter weekend, here are our holiday hours:
April 3 (Good Friday): 8:00 AM – 4:00 PM PDT
April 4 (Saturday): Closed
April 5 (Easter Sunday): Closed
April 6 (Easter Monday): Open regular hours
Wishing you an egg-cellent weekend!
— Team PG
Update to Build 10 of RealBand® 2026 for Windows®!
If you're already using RealBand 2026 for Windows, download build 10 to get all the latest additions and enhancements.
Band-in-a-Box® 2025 for Mac® users: Build 904 now available!
If you're already using Band-in-a-Box® 2025 for Mac®, make sure to grab the latest update! Build 904 is now available for download and includes the newest additions and enhancements from our team.
Band-in-a-Box® 2026 for Windows® users: Build 1237 is now available!
Already a Band-in-a-Box 2026 for Windows user? Stay up to date and download the build 1237 to get all the latest additions and enhancements.
|
|
|
|
|
|
|
|
|
|
|
|
Forums57
Topics86,205
Posts801,934
Members40,068
| |
Most Online64,515
Apr 8th, 2026
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean